//---------------------------------------------------------------------------
|
// Project PMACUSB Firmware
|
// Quad 1, Inc.
|
// Copyright © 1999. All Rights Reserved.
|
//
|
// SUBSYSTEM: PMACUSB Expansion Card
|
// FILE: VENDCMDS.H
|
// AUTHOR: Henry Bausley
|
//
|
// OVERVIEW
|
// ~~~~~~~~
|
// Header file of constants for various vendor specific codes
|
//
|
// NOTES
|
// ~~~~~
|
//
|
//----------------------------------------------------------------------------
|
|
#ifndef _VENDCMDS_H
|
#define _VENDCMDS_H
|
|
// Command Structure for ethernet
|
typedef struct tagEthernetCmd
|
{
|
BYTE RequestType;
|
BYTE Request;
|
WORD wValue;
|
WORD wIndex;
|
WORD wLength;
|
BYTE bData[1492];
|
} ETHERNETCMD,*PETHERNETCMD;
|
#define ETHERNETCMDSIZE 8
|
|
//-----------------------------------------------------------------------------
|
// Constants Defined by USB 1.1 Spec
|
//-----------------------------------------------------------------------------
|
#define VR_UPLOAD 0xC0 // command sent to host
|
#define VR_DOWNLOAD 0x40 // command sent to device
|
|
//-----------------------------------------------------------------------------
|
// Constants Defined by Anchor Chips that are internal to CPU or reserved
|
//-----------------------------------------------------------------------------
|
#define VR_ANCHOR_DLD 0xA0 // handled by core -- A0-AF reserved by Anchor
|
#define VR_EEPROM 0xA2 // loads (uploads) EEPROM
|
#define VR_RAM 0xA3 // loads (uploads) external ram
|
#define VR_SETI2CADDR 0xA4
|
#define VR_GETI2C_TYPE 0xA5 // 8 or 16 byte address
|
#define VR_GET_CHIP_REV 0xA6 // Rev A, B = 0, Rev C = 2
|
#define VR_TEST_MEM 0xA7 // runs mem test and returns result
|
#define VR_RENUM 0xA8 // renum
|
#define VR_DB_FX 0xA9 // Force use of double byte address EEPROM (for FX)
|
#define VR_I2C_100 0xAA // put the i2c bus in 100Khz mode
|
#define VR_I2C_400 0xAB // put the i2c bus in 400Khz mode
|
#define VR_NOSDPAUTO 0xAC // test code. does uploads using SUDPTR with manual length override
|
|
#define GET_CHIP_REV() ((CPUCS >> 4) & 0x00FF) // EzUSB Chip Rev Field
|
|
#define SERIAL_ADDR 0x50
|
#define EP0BUFF_SIZE 0x40
|
|
//-----------------------------------------------------------------------------
|
// Constants Defined by Quad 1 for implementing PMACUSB expansion card
|
//-----------------------------------------------------------------------------
|
#define VR_PMAC_SENDLINE 0xB0 // Device specific vendor commands
|
#define VR_PMAC_GETLINE 0xB1
|
#define VR_PMAC_FLUSH 0xB3
|
#define VR_PMAC_GETMEM 0xB4
|
#define VR_PMAC_SETMEM 0xB5
|
#define VR_PMAC_SENDCTRLCHAR 0xB6
|
|
#define VR_PMAC_ENARTDATAGAT 0xB7
|
#define VR_PMAC_INIT 0xB8
|
#define VR_EEPROM_VIDDID 0xB9
|
#define VR_PMAC_SETBIT 0xBA
|
#define VR_PMAC_SETBITS 0xBB
|
#define VR_PMAC_DATAPORT 0xBC
|
#define VR_PMAC_STATUSPORT 0xBD
|
#define VR_PMAC_PORT 0xBE
|
#define VR_PMAC_GETRESPONSE 0xBF
|
|
|
#define VR_PMAC_SETSERCHAR 0xC0
|
#define VR_PMAC_GETSERCHAR 0xC1
|
#define VR_PMAC_READREADY 0xC2
|
#define VR_PMAC_GETLINE_B 0xC3
|
#define VR_CTRL_RESPONSE 0xC4
|
#define VR_PMAC_GETBUFFER 0xC5
|
#define VR_PMAC_WRITEBUFFER 0xC6
|
#define VR_PMAC_WRITEERROR 0xC7
|
#define VR_PMAC_BINROTPUT 0xC8
|
#define VR_PMAC_BINROTERROR 0xC9
|
#define VR_PMAC_BINROTINIT 0xCA
|
#define VR_FWDOWNLOAD 0xCB
|
|
#define VR_PMAC_CLOSE 0xD0
|
|
// Added by LSJ for Multiple Host Communication with Ethernet
|
// And Interrupt Features
|
#define VR_PMAC_INTRSTRING 0xCC
|
#define VR_PMAC_KEEPALIVESTR 0xD6
|
#define VR_PMAC_SPINLOCK 0xD7
|
|
|
#define VR_IPADDRESS 0xE0
|
#define VR_MACADDRESS 0xE1
|
#define VR_DATE 0xE2
|
#define VR_TIME 0xE3
|
#define VR_VERSION 0xE4
|
|
|
#define EEPROMVER 8139
|
#define EEPROMTIME 8147
|
#define EEPROMDATE 8163
|
#define TCP_EEPROMADDR 8179
|
#define GATEWAYIP_EEPROMADDR 8180
|
#define GATEWAYMASK_EEPROMADDR 8184
|
#define IP_EEPROMADDR 8188
|
#define MAC_EEPROMADDR 8182
|
#define MAC_LEN 6
|
#define IP_LEN 4
|
#define TIME_LEN 16
|
#define DATE_LEN 16
|
#define VER_LEN 8
|
|
|
|
|
|
|
|
//-----------------------------------------------------------------------------
|
// Prototypes
|
//-----------------------------------------------------------------------------
|
#ifndef _WINDOWS
|
void EEPROMWrite(WORD addr, BYTE length, BYTE xdata *buf); //TPM EEPROM Write
|
void EEPROMRead(WORD addr, BYTE length, BYTE xdata *buf); //TPM EEPROM Read
|
void WaitForEndpoint0(bit IN);
|
#endif
|
|
#endif
|
