SDC/A5_QD_CF_REVIEW.git

			@@ -51,7 +51,7 @@
			#define AOIRAWBIN_NETWORK_DRIVE_PATH "Y:\\RawBin"

			enum CPJT_MeasureMode { CPJT_ModeAuto = 0, CPJT_ModeManual };
			// [2017:4:18]-[WEZASW] : WSI Module 장착 설비의 경우 PlanType 번호 변경.
			// [2017:4:18]-[WEZASW] : WSI Module 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙 占쏙옙占?PlanType 占쏙옙호 占쏙옙占쏙옙.
			enum CPJT_PlanType { CPJT_PlanReview = 0, CPJT_PlanUser, CPJT_PlanWSI, CPJT_PlanMeasure, CPJT_PlanReflow, CPJT_PlanWsiReflow, CPJT_PlanWsiUser,CPJT_PlanWsiMultiShot
			};
			enum CPJT_InsepectionType{REVIEW_REFLOW = 0, WSI_REFLOW, REV_WSI,WSIUSER, USER,WSIMULTISHOT};
			@@ -169,7 +169,7 @@
			CDitGlassRawClient* pDitGlassRaw = CDitGlassRawClient::GetInstance();
			if(pDitGlassRaw->ConnectServer() == FALSE)
			{
			g_pLog->DisplayMessage(_T("공유메모리 접근 실패!(Shared memory Access Fail)"));
			g_pLog->DisplayMessage(_T("��޸� �� !(Shared memory Access Fail)"));
			}
			}

			@@ -184,16 +184,16 @@

			BOOL bReturn = FALSE;

			// 현재 상태가 이전 상태와 다른가?
			// �� °� �� ¿� �ٸ��?

			//if (nProcessStatus!=m_nProcessStatus \|\| nProcessStatus==0)
			if (1)//nProcessStatus!=m_nProcessStatus \|\| nProcessStatus==0)
			{
			//if (nProcessStatus==0) // 초기(0) 상태이면..
			//if (nProcessStatus==0) // �ʱ�(0) ��̸�..
			//{
			// bReturn = TRUE;
			//}
			// else if (nProcessStatus==(m_nProcessStatus+1)) // 이전 상태 다음(+1)이면..
			// else if (nProcessStatus==(m_nProcessStatus+1)) // �� (+1)�̸�..
			// {
			// bReturn = TRUE;
			// }
			@@ -204,9 +204,9 @@
			// bReturn = FALSE;
			//}

			if (bReturn) // 수행이면...
			if (bReturn) // ��̸�...
			{
			// Thread 생성 후 Thread 수행
			// Thread �� Thread ��
			CSequenceProcessData* pThreadData = new CSequenceProcessData(this);
			if (pThreadData)
			{
			@@ -227,7 +227,7 @@
			}
			}
			else if(nProcessStatus==2){
			// Thread 생성 후 Thread 수행
			// Thread �� Thread ��
			CSequenceProcessData* pThreadData = new CSequenceProcessData(this);
			if (pThreadData)
			{
			@@ -277,7 +277,7 @@
			CReviewResult* pWsiResult = pGlassResult->GetWsiResult(nModuleIndex);
			if (pWsiResult==NULL) goto RESULT_FAIL;

			// 마지막 인덱스를 가져온다.
			// �� ε�� ´�.
			int nCurResultIdx = pWsiResult->GetLastSReviewResultIndex() + 1; // last index + 1
			int nStartResultIdx = pWsiResult->GetStartSReviewResultIndex();
			int nEndResultIdx = pWsiResult->GetEndSReviewResultIndex();
			@@ -291,13 +291,13 @@
			int nMPosY = int(pPosition->dMotorPosY * 1000.0);
			double dTime = (double) m_ProcessTimer.GetDurationMilliSecond();

			// 인덱스가 다르면 비정상임.
			// �ε�� ٸ�� .
			if (measureResut.nResultIndex != nCurResultIdx)
			{
			goto RESULT_FAIL;
			}

			// 현재 데이터 저장.
			// �� .
			// measureResut

			if(pWsiResult->GetSReviewResultCount() == 0) return ;
			@@ -324,7 +324,7 @@
			// set last result idx
			pWsiResult->SetLastSReviewResultIndex(nCurResultIdx);

			// 마지막 포인트까지 왔고, WSI 결과가 남아 있으면...
			// 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙트占쏙옙占쏙옙 占쌉곤옙, WSI 占쏙옙占쏙옙占?占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙...
			if(nCurResultIdx==nEndResultIdx && nCurResultIdx<=pWsiResult->GetSReviewResultCount())
			{
			nStartResultIdx = nCurResultIdx + 1;
			@@ -335,8 +335,8 @@
			pWsiResult->SetStartSReviewResultIndex(nStartResultIdx);
			pWsiResult->SetEndSReviewResultIndex(nEndResultIdx);

			// 나머지 포인트 리뷰 수행하자.
			::Sleep(3000); // 딜레이는 필수임. 없으면 동작 안함.
			// �� Ʈ �� .
			::Sleep(3000); // 占쏙옙占쏙옙甄占?占십쇽옙占쏙옙. 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙.
			// Process_RemainWsiPoint(nModuleIndex);
			}

			@@ -362,7 +362,7 @@
			CReviewResult* pWsiResult = pGlassResult->GetWsiUserResult(nModuleIndex);
			if (pWsiResult==NULL) goto RESULT_FAIL;

			// 마지막 인덱스를 가져온다.
			// �� ε�� ´�.
			int nCurResultIdx = pWsiResult->GetLastSReviewResultIndex() + 1; // last index + 1
			int nStartResultIdx = pWsiResult->GetStartSReviewResultIndex();
			int nEndResultIdx = pWsiResult->GetEndSReviewResultIndex();
			@@ -376,13 +376,13 @@
			int nMPosY = int(pPosition->dMotorPosY * 1000.0);
			double dTime = (double) m_ProcessTimer.GetDurationMilliSecond();

			// 인덱스가 다르면 비정상임.
			// �ε�� ٸ�� .
			if (measureResut.nResultIndex != nCurResultIdx)
			{
			goto RESULT_FAIL;
			}

			// 현재 데이터 저장.
			// �� .
			// measureResut

			if(pWsiResult->GetSReviewResultCount() == 0) return ;
			@@ -407,7 +407,7 @@
			// set last result idx
			pWsiResult->SetLastSReviewResultIndex(nCurResultIdx);

			// 마지막 포인트까지 왔고, WSI 결과가 남아 있으면...
			// 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙트占쏙옙占쏙옙 占쌉곤옙, WSI 占쏙옙占쏙옙占?占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙...
			if(nCurResultIdx==nEndResultIdx && nCurResultIdx<=pWsiResult->GetSReviewResultCount())
			{
			nStartResultIdx = nCurResultIdx + 1;
			@@ -418,8 +418,8 @@
			pWsiResult->SetStartSReviewResultIndex(nStartResultIdx);
			pWsiResult->SetEndSReviewResultIndex(nEndResultIdx);

			// 나머지 포인트 리뷰 수행하자.
			::Sleep(3000); // 딜레이는 필수임. 없으면 동작 안함.
			// �� Ʈ �� .
			::Sleep(3000); // 占쏙옙占쏙옙甄占?占십쇽옙占쏙옙. 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙.
			// Process_RemainWsiPoint(nModuleIndex);
			}

			@@ -449,7 +449,7 @@
			CAlignResult *pAlignResult = &pGlassResult->m_AlignResult;
			CAlignRecipe *pAlignRecipe = &pGlassResult->m_AlignRecipe;

			// 얼라인 자동조명 결과 레시피에 저장하자.
			// 占쏙옙占쏙옙占?占쌘듸옙占쏙옙占쏙옙 占쏙옙占?占쏙옙占쏙옙占실울옙 占쏙옙占쏙옙占쏙옙占쏙옙.
			CRsRcpAlignInfo *pRsRcpAlignInfo = m_pSP2P->ISP2P_Recipe_GetRsRcpAlignInfo();
			if (pRsRcpAlignInfo!=NULL && pRsRcpAlignInfo->m_bAutoProcess)
			{
			@@ -463,25 +463,25 @@
			pRsRcpAlignInfo->m_dSecondCamExposure = pCurAlignResult->dExposureTime[1];
			}

			// 레시피 데이타 저장
			// �� Ÿ ��
			//m_pDoc->Recipe_WriteRecipeFile();
			}


			BOOL bLastAlignResult = FALSE;
			CCoordCalibrator *pCoordCalibrator = m_pSP2P->ISP2P_GetCoordCalibrator();
			// 최종 얼라인 결과..
			// 占쏙옙占쏙옙 占쏙옙占쏙옙占?占쏙옙占?.
			if (pCoordCalibrator && pCurAlignResult->nResultCode==Align_Success)
			{
			g_pLog->DisplayMessage(_T("[AlignResult] Align Find Success!"));

			// 얼라인 결과 글라스 정보에 갱신
			// 占쏙옙占쏙옙占?占쏙옙占?占쌜띰옙 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙
			pAlignResult = pCurAlignResult;

			pCoordCalibrator->SetFirstMarkPos(pAlignResult->dFindPositionX[0], pAlignResult->dFindPositionY[0], pAlignRecipe->dGlassPositionX[0], pAlignRecipe->dGlassPositionY[0]);
			pCoordCalibrator->SetSecondMarkPos(pAlignResult->dFindPositionX[1], pAlignResult->dFindPositionY[1], pAlignRecipe->dGlassPositionX[1], pAlignRecipe->dGlassPositionY[1]);

			// 각도 계산
			// 占쏙옙占쏙옙 占쏙옙占?
			if(pCoordCalibrator->CalculateAlignResult() == TRUE)
			{
			sAlignResult = pCoordCalibrator->GetAlignResult();
			@@ -490,38 +490,38 @@
			bLastAlignResult = !pAlignRecipe->bRotateProcess;
			}

			// 글라스 각도 보정 유무
			// �۶� ��
			CCameraControlAlign *pAlignCameraControl = m_pSP2P->ISP2P_GetAlignCameraControl();
			SThetaMotorInfo* pThetaMotorInfo = m_pSP2P->ISP2P_GetThetaMotorInfo();
			CMotorControl* pMotorControl = m_pSP2P->ISP2P_GetMotorControl();

			if (pAlignRecipe->bRotateProcess && pAlignCameraControl && pMotorControl && pThetaMotorInfo)
			{
			if (fabs(sAlignResult.dDegree) <= pAlignRecipe->dGlassAngleMin) // 현재 글라스 각도가 최소각보다 작으면 성공
			if (fabs(sAlignResult.dDegree) <= pAlignRecipe->dGlassAngleMin) // �� ۶� �� ּҰ��
			{
			bLastAlignResult = TRUE;
			g_pLog->DisplayMessage(_T("[AlignResult] Success! Last Glass Angle : %.8lf degree, Retry Count : %d ea"),
			sAlignResult.dDegree, pCurAlignResult->nFindCount);
			}
			else if (fabs(sAlignResult.dDegree) > pAlignRecipe->dGlassAngleMax) // 현재 글라스 각도가 최대각보다 크면 실패
			else if (fabs(sAlignResult.dDegree) > pAlignRecipe->dGlassAngleMax) // �� ۶� �� ִ밢�� ũ��
			{
			bLastAlignResult = FALSE;
			g_pLog->DisplayMessage(_T("[AlignResult] FAIL! Last Glass Angle : %.8lf degree, Retry Count : %d ea"),
			sAlignResult.dDegree, pCurAlignResult->nFindCount);
			}
			else if (pCurAlignResult->nFindCount < pAlignRecipe->nRetryCount) // 재보정 횟수가 레시피 횟수 이하이면 재보정 수행
			else if (pCurAlignResult->nFindCount < pAlignRecipe->nRetryCount) // �纸�� Ƚ�� Ƚ�� ̸� �纸��
			{
			g_pLog->DisplayMessage(_T("[AlignResult] Current Glass Angle : %.8lf degree, Retry Count : %d ea"),
			sAlignResult.dDegree, pCurAlignResult->nFindCount);

			// 모터로 각도 보정..
			// ��ͷ� �� ..
			double dCalAngle = sAlignResult.dDegree;
			dCalAngle = pThetaMotorInfo->dPosition - dCalAngle ;
			g_pLog->DisplayMessage(_T("[AlignResult] Move Rotate Glass Angle : %.8lf degree"), dCalAngle);
			pMotorControl->AxisThetaManualGoEnd(dCalAngle);
			::Sleep(100);

			// 얼라인 ReProcess
			// 占쏙옙占쏙옙占?ReProcess
			if (pAlignCameraControl->AlignProcess())
			{
			g_pLog->DisplayMessage(_T("[AlignResult] Align Find Process ReStarted!"));
			@@ -556,8 +556,8 @@
			//m_pView->SetAlignResult(pAlignResult->nResultCode, sAlignResult.dOriginX, sAlignResult.dOriginY, sAlignResult.dDegree);
			}

			// PCControl 얼라인 신호 전송.
			if (bLastAlignResult) // 최종 얼라인결과...
			// PCControl 占쏙옙占쏙옙占?占쏙옙호 占쏙옙占쏙옙.
			if (bLastAlignResult) // �� ΰ��...
			{
			SendResultToSignalControl(PCControlSendData_AlignResult_CPJT, SIGNAL_SEND_RESULT_SUCCESS);
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::AlignStart] Send Align Success Data!"));
			@@ -690,12 +690,12 @@
			m_pSP2P->ISP2P_UpdateReviewProcessStatus(ReviewProcessStatus_None, nPlanIndex);


			//데모용
			//占쏙옙占쏙옙占?
			AFM_SetAFMTracking(FALSE);
			return;
			}

			//190727 chm WSI 진행시 End 체크 후 진행
			//190727 chm WSI 占쏙옙占쏙옙占?End 체크 占쏙옙 占쏙옙占쏙옙
			if(nBeforePlanIndex== CPJT_PlanWSI\|\|nBeforePlanIndex== CPJT_PlanWsiReflow\|\|nBeforePlanIndex== CPJT_PlanWsiUser)
			{
			if(pPlanInfo->m_nReviewType == CPJT_PlanWSI \|\|pPlanInfo->m_nReviewType == CPJT_PlanWsiReflow\|\|pPlanInfo->m_nReviewType== CPJT_PlanWsiUser \|\| pPlanInfo->m_nReviewType == CPJT_PlanWsiMultiShot)
			@@ -724,13 +724,13 @@
			}
			}

			//190727 chm WSI type 진행후 Review 플랜시 진행시 카메라가 글라스 밖에 있을경우를 위한...
			//190727 chm WSI type 占쏙옙占쏙옙占쏙옙 Review 占시뤄옙占쏙옙 占쏙옙占쏙옙占?카占쌨띰옙 占쌜띰옙 占쌜울옙 占쏙옙占쏙옙占쏙옙痢?占쏙옙占쏙옙...
			if(nBeforePlanIndex== CPJT_PlanWSI \|\|nBeforePlanIndex== CPJT_PlanWsiReflow\|\|nBeforePlanIndex== CPJT_PlanWsiUser)
			{
			if( pPlanInfo->m_nReviewType == CPJT_PlanReview\|\| pPlanInfo->m_nReviewType == CPJT_PlanUser\|\| pPlanInfo->m_nReviewType == CPJT_PlanMeasure\|\| pPlanInfo->m_nReviewType == CPJT_PlanReflow)
			{

			CTotalPitchMeasure* pTotapPithMeasure = m_pSP2P->ISP2P_GetTotalPitchMeasure(); // 빌려쓰기! 20190730 chm 나중에 함수로 따로....
			CTotalPitchMeasure* pTotapPithMeasure = m_pSP2P->ISP2P_GetTotalPitchMeasure(); // 占쏙옙占쏙옙占쏙옙占? 20190730 chm 占쏙옙占쌩울옙 占쌉쇽옙占쏙옙 占쏙옙占쏙옙....

			const CMotorControlInfo* pSystemMotorInfo = m_pSP2P->ISP2P_System_GetMotorInfo();
			if(pSystemMotorInfo !=NULL)
			@@ -774,8 +774,8 @@
			if(pPlanInfo == NULL) continue;

			//210325
			//END 나 언로딩이 되어버렸지만 해당 함수가 쓰레드로 돌아가고 있어 start 함수를 타버림
			//그것에 대한 예외처리
			//END 占쏙옙 占쏙옙琯占쏙옙占?占실억옙占쏙옙占쏙옙占쏙옙占?占쌔댐옙 占쌉쇽옙占쏙옙 占쏙옙占쏙옙占쏙옙占?占쏙옙占싣곤옙占쏙옙 占쌍억옙 start 占쌉쇽옙占쏙옙 타占쏙옙占쏙옙
			//�װͿ� �� ó��
			if (GetProcessStatus() == ProcessReviewEnd_CPJT \|\| GetProcessStatus() == ProcessReviewUnloding_CPJT)
			{
			g_pLog->DisplayMessage(_T("[ProcessStop] StartProcessing Sequence Stop Status : %d"), GetProcessStatus());
			@@ -788,6 +788,20 @@
			if (( nTotalCount += pGlassResult->GetTotalSReviewResultCount()) > 0)
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[Sequence Processor] Review Plan Start!"));
			//LYW DCOLL 임시조치
			CDitGlassRawClient *pDitRawClient = CDitGlassRawClient::GetInstance();
			if (pDitRawClient->isConnect() == TRUE)
			{

			_grmDefectData* pSharedDefect = pDitRawClient->GetDefectData(0);//pReviewResult->nDefectidx2
			_grmDefectReviewData * pSharedDefectReview = &pSharedDefect->m_ReviewDefect;

			//size_t CharactersConverted;
			//wcstombs_s(&CharactersConverted, pSharedDefectReview->m_strRevImageName, pReviewResult->strImgFileName, _TRUNCATE);

			strcpy(pSharedDefectReview->m_strRevImageName, "");
			}
			//LYW DCOLL 임시조치
			::Sleep(nWaitTime);
			m_pSP2P->ISP2P_GetReviewProcessor()->ResetGantryDone();
			bExcute = ReviewStartProcessing(pGlassResult, nPlanIdx);
			@@ -816,7 +830,7 @@
			m_pSP2P->ISP2P_DisplayMessage(_T("[Sequence Processor] WSI Plan End!"));
			}
			break;
			//미사용
			//占싱삼옙占?
			case CPJT_PlanMeasure:
			if (( nTotalCount += pGlassResult->GetTotalSMeasureResultCount()) > 0)
			{
			@@ -925,8 +939,8 @@

			AllAckSignalOff();
			m_pSP2P->ISP2P_GetReviewProcessor()->ResetGantryDone();
			SetCheckWSIEnd(-1); //190726 wsiend체크 초기화
			SetWsiType(-1); //wsi reflow 타입 구별 초기화
			SetCheckWSIEnd(-1); //190726 wsiendüũ �ʱ�ȭ
			SetWsiType(-1); //wsi reflow Ÿ�� ʱ�ȭ
			SetLastPointCheck(FALSE);

			bFileFind = FALSE;
			@@ -953,18 +967,18 @@
			}
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] Glass Result Count : %d ea"), nGlassResultCount);

			pGlassResult->ResetDefocusCount();//로딩 부분에서 defocus count 초기화 190821 chm
			pGlassResult->ResetDefocusCount();//�ε� �κп�� defocus count �ʱ�ȭ 190821 chm


			CTime time = CTime::GetCurrentTime();
			pGlassResult->m_strResultDate.Format(_T("%04d.%02d.%02d"), time.GetYear(), time.GetMonth(), time.GetDay());

			//if(Revolver_SetGoHome(0)) // 리볼버 HOME 시퀀스
			//if(Revolver_SetGoHome(0)) // �� HOME ��
			//{
			// m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] Revolver Set GoHome Success!"));
			//}

			//#3357 KYH Align Image 초기화 ADD START
			//#3357 KYH Align Image �ʱ�ȭ ADD START
			CCameraControlAlign* pAlignCameraControl = m_pSP2P->ISP2P_GetAlignCameraControl();
			if (pAlignCameraControl != NULL)
			{
			@@ -972,7 +986,7 @@

			g_pLog->DisplayMessage(_T("[Align] Align Image Clear"));
			}
			//#3357 KYH Align Image 초기화 ADD END
			//#3357 KYH Align Image �ʱ�ȭ ADD END

			// get transfer data
			int nResultCode = 0;
			@@ -999,7 +1013,7 @@

			if (pDitRawClient->isConnect()==FALSE)
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::GlassLoading]공유메모리 연결 끊김 재연결 시도 "));
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::GlassLoading]��޸� �� 翬�� õ� "));
			int nReconnect=0;
			while (1)
			{
			@@ -1014,11 +1028,11 @@
			Sleep(1000);
			if (pDitRawClient->isConnect() == FALSE)
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::GlassLoading]공유메모리 연결 실패 Count[%d]"), nReconnect);
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::GlassLoading]��޸� �� Count[%d]"), nReconnect);
			}
			else
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::GlassLoading]공유메모리 연결 성공"));
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::GlassLoading]��޸� �� "));
			break;
			}
			nReconnect += 1;
			@@ -1028,9 +1042,9 @@

			}

			// #3381 LYW CF AOI Review 전설비 FDC TackTime 오보고 현상 개선 ADD START
			// #3381 LYW CF AOI Review �� FDC TackTime �� ADD START
			pDitRawClient->GetGlassData()->m_tmReviewLoading = CTime::GetCurrentTime();
			// #3381 LYW CF AOI Review 전설비 FDC TackTime 오보고 현상 개선 ADD END
			// #3381 LYW CF AOI Review �� FDC TackTime �� ADD END


			CString strGlassIDTemp = NULL;
			@@ -1047,9 +1061,12 @@
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::GlassLoading] Send Loading Success Signal!"));

			strFileName.Format(_T("%s_%s"), strGlassIDTemp, strGlassStepIdTemp);

			//업데이트시

			//bFileFind = FindRawBinFile(strFileName);
			bFileFind = TRUE;


			pDitRawClient->SetReviewStart();
			Sleep(1000);
			@@ -1094,7 +1111,7 @@
			}
			}

			//// 190725 고객사 요청사항 chm ASCEND 시 alarm
			//// 190725 占쏙옙占쏙옙占?占쏙옙청占쏙옙占쏙옙 chm ASCEND 占쏙옙 alarm
			const CRsRcpReviewInfo* pRsRcpReviewInfo = m_pSP2P->ISP2P_Recipe_GetRsRcpReviewInfo();

			const CRcpSortingInfo *pSortingInfo = pRsRcpReviewInfo->GetRcpReviewSortInfo();
			@@ -1111,7 +1128,7 @@



			////레시피 세팅으로 옴김 190618
			////�� ȱ� 190618
			if(GetUseAfmHomePosition())
			{
			g_pLog->DisplayMessage(_T("[AFM] AFM Home Position Start!!!"));
			@@ -1120,7 +1137,7 @@

			}

			//공유메모리 커멘드 리뷰 스타트(글라스 로딩)
			//占쏙옙占쏙옙占쌨몌옙 커占쏙옙占?占쏙옙占쏙옙 占쏙옙타트(占쌜띰옙 占싸듸옙)
			CDitGlassRawClient* pDitSharedGlassRaw = CDitGlassRawClient::GetInstance();
			if (pDitSharedGlassRaw->isConnect() == FALSE) {
			m_pSP2P->ISP2P_DisplayMessage(_T("[DitGlassRawClient] Shared Memory Connect Fail"));
			@@ -1173,7 +1190,7 @@
			CReviewProcessor* pReviewProcessor = m_pSP2P->ISP2P_GetReviewProcessor();
			if(pReviewProcessor == NULL) return ;
			pReviewProcessor->SetCellData(pGlassResult);
			pReviewProcessor->SetReviewCount(0); // 리뷰 Sequence No 초기화.
			pReviewProcessor->SetReviewCount(0); // �� Sequence No �ʱ�ȭ.
			pReviewProcessor->SetPlanReviewCount(0);
			pReviewProcessor->SetPlanWSICount(0);
			// Process Status Update
			@@ -1214,7 +1231,7 @@

			if (SendSignalToSignalControl(PCControlSendSignalIndex_Ack, PCControlSend_AlignStartAck_CPJT))
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::AlignStart] Send Align Start Ack!"));
			//Sleep(400);//프레임 문제 딜레이 주기 chm190602
			//Sleep(400);//占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙占?占쌍깍옙 chm190602

			// 1. get current glass result
			CGlassResult* pGlassResult = m_pSP2P->ISP2P_GetCurrentGlassResult();
			@@ -1238,7 +1255,7 @@
			}
			else
			{
			// 190710 SJB Align Camera Disconnect Check, Align Step 진행 전에 확인한다.
			// 190710 SJB Align Camera Disconnect Check, Align Step �� Ȯ��Ѵ�.
			if(pAlignCameraControl)
			{
			if(pAlignCameraControl->AlignCameraDisconnectCheck() == FALSE)
			@@ -1254,9 +1271,9 @@
			}
			else
			{
			//지워야됨
			//��ߵ�
			Sleep(1000);
			//TEST 모드
			//TEST 占쏙옙占?
			{
			SendResultToSignalControl(PCControlSendData_AlignResult_CPJT, SIGNAL_SEND_RESULT_SUCCESS);
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::AlignStart] Send Align SUCCESS Data!"));
			@@ -1265,7 +1282,7 @@
			}


			//주석 풀기
			//�ּ� Ǯ��
			// 4. send align fail signal to plc
			//SendResultToSignalControl(PCControlSendData_AlignResult_CPJT, SIGNAL_SEND_RESULT_FAIL);
			//m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::AlignStart] Send Align Fail Data!"));
			@@ -1299,7 +1316,7 @@
			if (bFileFind == FALSE)
			{
			SendResultToSignalControl(PCControlSendData_ReviewResult_CPJT, SIGNAL_SEND_RESULT_FAIL);
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReadRawFile] 결과파일 찾기 실패"));
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReadRawFile] 占쏙옙占쏙옙占쏙옙占?찾占쏙옙 占쏙옙占쏙옙"));
			return;
			}

			@@ -1307,7 +1324,7 @@
			CGlassResult* pGlassResult = m_pSP2P->ISP2P_GetCurrentGlassResult();
			if (pGlassResult==NULL) return;

			//공유메모리 커멘드 리뷰 스타트(글라스 로딩)
			//占쏙옙占쏙옙占쌨몌옙 커占쏙옙占?占쏙옙占쏙옙 占쏙옙타트(占쌜띰옙 占싸듸옙)
			CDitGlassRawClient* pDitSharedGlassRaw = CDitGlassRawClient::GetInstance();
			if(pDitSharedGlassRaw->isConnect() == FALSE) m_pSP2P->ISP2P_DisplayMessage(_T("[DitGlassRawClient] Shared Memory Connect Fail"));

			@@ -1334,7 +1351,7 @@
			int nTotalPlanCount = CalculatePlanData(pGlassResult);
			m_pSP2P->ISP2P_DisplayMessage(_T("[Read Raw File] Review All Plan Total Count : %d"), nTotalPlanCount);

			//지워야됨
			//��ߵ�
			Sleep(1000);
			// send review ready
			SendResultToSignalControl(PCControlSendData_ReviewResult_CPJT, SIGNAL_SEND_RESULT_SUCCESS);
			@@ -1347,7 +1364,7 @@
			m_pSP2P->ISP2P_DisplayMessage(_T("[ReadRawFile] AOI Result File Read Fail![%.3f ms]"), processTimer.GetDurationMilliSecond());


			//테스트 모드
			//占쌓쏙옙트 占쏙옙占?
			//{
			// // send review ready
			// SendResultToSignalControl(PCControlSendData_ReviewResult_CPJT, SIGNAL_SEND_RESULT_SUCCESS);
			@@ -1355,7 +1372,7 @@
			// m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReadRawFile] Send Review Ready Signal!"));
			//}

			//주석 해제
			//�ּ� ��
			int nCurPlanIndex = 0;
			CRsRcpReviewInfo* pRsRcpReviewInfo = m_pSP2P->ISP2P_Recipe_GetRsRcpReviewInfo();
			if(pRsRcpReviewInfo)
			@@ -1377,8 +1394,8 @@
			}
			}

			//// [2017:5:24]-[WEZASW] : Review Image Upload Dir 생성.(FTPUploader에서 자동 삭제 되더라도 실제 리뷰시 생성)
			//// '반복검사'시 FTPUploader에서 업로드 후 삭제 시점과 PCControl Glass Unloading 후 즉시 Loading시 Review에서의 업로드 경로(GlassID) 생성 시점 오류
			//// [2017:5:24]-[WEZASW] : Review Image Upload Dir 占쏙옙占쏙옙.(FTPUploader占쏙옙占쏙옙 占쌘듸옙 占쏙옙占쏙옙 占실댐옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙占?占쏙옙占쏙옙)
			//// '占쌥븝옙占싯삼옙'占쏙옙 FTPUploader占쏙옙占쏙옙 占쏙옙占싸듸옙 占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙 PCControl Glass Unloading 占쏙옙 占쏙옙占?Loading占쏙옙 Review占쏙옙占쏙옙占쏙옙 占쏙옙占싸듸옙 占쏙옙占?GlassID) 占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙
			const CNetworkInfo *pNetworkInfo = m_pSP2P->ISP2P_System_GetNetworkInfo();
			CString strPath = _T("");
			//if(pNetworkInfo && pNetworkInfo->m_strUploadImagePath.IsEmpty() == FALSE)
			@@ -1393,7 +1410,7 @@
			if (CDitGlassRawClient::GetInstance()->GetGlassData() == NULL) return;


			//업로드 폴더가 없으면 폴더 생성후 다시 업로드 경로 Set 20190917chm
			//占쏙옙占싸듸옙 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙 占쌕쏙옙 占쏙옙占싸듸옙 占쏙옙占?Set 20190917chm
			if(Uploadfile.FindFile(strPath)==FALSE)
			{
			CTime tmServerLoadingTime = CDitGlassRawClient::GetInstance()->GetGlassData()->m_tmGlassLoading;
			@@ -1404,7 +1421,7 @@



			//taek 210126 rtms 보고용 이미지 폴더 생성
			//taek 210126 rtms 占쏙옙占쏙옙占?占싱뱄옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙
			CreateDirectory(pReviewProcessor->GetRTMSUploadImagePath(),NULL);
			}

			@@ -1450,10 +1467,10 @@
			// _grmCellData* pCellData = pDitRawClient->GetCellData(0);
			// if(pCellData)
			// {
			// // pCellData->m_nTotalPitchData[0] = int(pTotapPithMeasure->GetTotalPitchBD() * 1000); // 장축, 작업자 기준 위쪽
			// // pCellData->m_nTotalPitchData[1] = int(pTotapPithMeasure->GetTotalPitchAC() * 1000); // 장축, 작업자 기준 아래쪽
			// // pCellData->m_nTotalPitchData[2] = int(pTotapPithMeasure->GetTotalPitchAB() * 1000); // 단축, 작업자 기준 왼쪽
			// // pCellData->m_nTotalPitchData[3] = int(pTotapPithMeasure->GetTotalPitchCD() * 1000); // 단축, 작업자 기준 오른쪽
			// // pCellData->m_nTotalPitchData[0] = int(pTotapPithMeasure->GetTotalPitchBD() * 1000); // ��, �۾��
			// // pCellData->m_nTotalPitchData[1] = int(pTotapPithMeasure->GetTotalPitchAC() * 1000); // ��, �۾�� Ʒ��
			// // pCellData->m_nTotalPitchData[2] = int(pTotapPithMeasure->GetTotalPitchAB() * 1000); // ��, �۾��
			// // pCellData->m_nTotalPitchData[3] = int(pTotapPithMeasure->GetTotalPitchCD() * 1000); // ��, �۾��
			// }
			// }
			// }
			@@ -1461,7 +1478,7 @@
			// {
			// m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor] TotalPitchMeasure Result Fail!"));

			// // 190711 SJB, TotalPitchMeasure Fail시에 바로 Motor로 명령을 날리기 보다는 Motion Enable 신호를 확인하자
			// // 190711 SJB, TotalPitchMeasure Fail占시울옙 占쌕뤄옙 Motor占쏙옙 占쏙옙占쏙옙占?占쏙옙占쏙옙占쏙옙 占쏙옙占쌕댐옙 Motion Enable 占쏙옙호占쏙옙 확占쏙옙占쏙옙占쏙옙
			//
			// if(!pTotapPithMeasure->GetMotorEnable())
			// {
			@@ -1493,9 +1510,9 @@
			}
			else
			{
			//지워야됨
			//��ߵ�
			//Sleep(1000);
			//Test모드
			//Test占쏙옙占?
			//SendResultToSignalControl(PCControlSendData_ReviewComplete_CPJT, SIGNAL_SEND_RESULT_SUCCESS);
			//SendSignalToSignalControl(PCControlSendSignalIndex_Seq, PCControlSend_ReviewComplete_CPJT);
			//m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReviewStart] Send Review Success Signal!"));
			@@ -1513,6 +1530,9 @@
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::IN] ReviewEnd!"));

			if (SendSignalToSignalControl(PCControlSendSignalIndex_Ack, PCControlSend_ReviewEndAck_CPJT))
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReviewEnd] Send Review End Ack!"));

			CDitGlassRawClient* m_pDitGlassRaw = CDitGlassRawClient::GetInstance();
			if (m_pSP2P->ISP2P_GetWSIControl(0)!=NULL)
			{
			@@ -1521,20 +1541,21 @@
			}
			if (GetLastPointCheck() == FALSE)
			{
			Sleep(2500);
			Sleep(1000);
			}
			ReJudgeProcessing(m_pDitGlassRaw);
			m_pDitGlassRaw->GetGlassData()->m_tmReviewEnd = CTime::GetCurrentTime();
			if (m_pDitGlassRaw->isConnect() != FALSE) m_pDitGlassRaw->SetReviewEnd();
			if (m_pDitGlassRaw->isConnect() != FALSE)
			{
			m_pDitGlassRaw->SetReviewEnd();
			m_pDitGlassRaw->WriteReviewRawBinFile();
			}

			m_pDitGlassRaw->GetGlassData()->m_nReviewNum = m_pSP2P->ISP2P_GetReviewProcessor()->GetPlanReviewCount();
			//SendDVDataToSignalControl();// 안쓰쥬
			//SendDVDataToSignalControl();// �Ⱦ��

			if (SendSignalToSignalControl(PCControlSendSignalIndex_Ack, PCControlSend_ReviewEndAck_CPJT))
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReviewEnd] Send Review End Ack!"));

			//OverTime 발생시 제어에서 END ACK를 기다리는게 아니라 걍 Conplete를 기다린다.
			//음 ... 로직 오류인데일단 추가
			//OverTime 占쌩삼옙占쏙옙 占쏙옙占쏘에占쏙옙 END ACK占쏙옙 占쏙옙摸占쏙옙째占?占싣니띰옙 占쏙옙 Conplete占쏙옙 占쏙옙摸占쏙옙占?
			//�� ... �� ε��ϴ� �߰�

			if (GetLastPointCheck() == FALSE)
			{
			@@ -1561,10 +1582,10 @@
			m_pSP2P->ISP2P_GetWSIControl(0)->SendWsiAfmSafePosMove();
			m_pSP2P->ISP2P_GetWSIControl(1)->SendWsiAfmSafePosMove();
			}
			// 결과파일 생성은 Review에서 관여 안함
			// 占쏙옙占쏙옙占쏙옙占?占쏙옙占쏙옙占쏙옙 Review占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙
			if(m_pDitGlassRaw->isConnect()==FALSE) WriteRawData(pGlassResult);

			//디포커스 알람 send 20190819chm
			//��Ŀ�� ˶� send 20190819chm
			if(pGlassResult->m_nDeFocusCount >0)
			{
			SendSignalToSignalControl(PCControlSendSignalIndex_State,PCControlSend_Defoucs,1000);
			@@ -1574,8 +1595,8 @@
			CString strTime = _T("");
			strTime.Format(_T("%04d-%02d-%02d %02d:%02d:%02d"), time.GetYear(), time.GetMonth(), time.GetDay(), time.GetHour(), time.GetMinute(), time.GetSecond());

			CDlgDefocusList::GetInstance()->SetDefocusTotalCount(pGlassResult->m_nDeFocusCount);//토탈 카운트 Add
			CDlgDefocusList::GetInstance()->SetDefocusData(strTime,pGlassResult->m_strGlassID,pGlassResult->m_nDeFocusCount);//ui 추가후 갱신
			CDlgDefocusList::GetInstance()->SetDefocusTotalCount(pGlassResult->m_nDeFocusCount);//��Ż ī��Ʈ Add
			CDlgDefocusList::GetInstance()->SetDefocusData(strTime,pGlassResult->m_strGlassID,pGlassResult->m_nDeFocusCount);//ui �߰��

			}

			@@ -1589,17 +1610,17 @@
			g_pLog->DisplayMessage(_T("History Button Enable"));
			m_pSP2P->ISP2P_GetDiagnosisHistory2();

			/*int nModuleCount = m_pSP2P->ISP2P_GetModuleStatusCount(); //0503 리뷰 End시 조명값 0으로 초기화
			/*int nModuleCount = m_pSP2P->ISP2P_GetModuleStatusCount(); //0503 占쏙옙占쏙옙 End占쏙옙 占쏙옙占쏙옙占?0占쏙옙占쏙옙 占십깍옙화
			for (int nModuleIdx = 0; nModuleIdx < nModuleCount; nModuleIdx++)
			{
			{
			ReviewLight_SetLightLevel(nModuleIdx, 0);
			g_pLog->DisplayMessage(_T("Module[%d] LightLevel 초기화"), nModuleIdx);
			g_pLog->DisplayMessage(_T("Module[%d] LightLevel �ʱ�ȭ"), nModuleIdx);
			}

			}*/

			//5. PCControl 신호 업데이트
			//5. PCControl ��ȣ ��Ʈ
			if (pGlassResult)
			{
			m_pSP2P->ISP2P_UpdateProcessStatus(GetProcessStatus(), pGlassResult);
			@@ -1641,8 +1662,8 @@

			CString strCode = _T("");

			int nDefectCount = pRawData->GetGlassData()->m_nDefectNum; // 디펙갯수
			int nJudgeCount = pRcpReviewInfo->GetRcpZoneFilterInfoCount();// 필터 갯수
			int nDefectCount = pRawData->GetGlassData()->m_nDefectNum; // ��尹��
			int nJudgeCount = pRcpReviewInfo->GetRcpZoneFilterInfoCount();// ��
			int nFilterType = 0;
			int nJudgeType = 0;
			int nZoneNumber = 0;
			@@ -1656,7 +1677,7 @@
			int nJudgeCellOKCount = 0;
			int nPixelSize = 0;
			int nPixelFilterSize = 0;
			//높이 데이터
			//��
			//1 wsi, 3 CS, 4 R, 5 G, 6 B
			//pRawData->GetDefectData(nDefectIdx)->m_ReviewDefect.m_fWsi_ResultData[1];//Defect
			//pRawData->GetDefectData(nDefectIdx)->m_ReviewDefect.m_fWsi_ResultData[3];//cs
			@@ -1670,10 +1691,10 @@
			{


			#pragma region 얼라인 fail
			#pragma region 占쏙옙占쏙옙占?fail
			if (m_pSP2P->ISP2P_GetCurrentGlassResult()->GetAlignResult()->nResultCode != Align_Success)
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[TEST Process::ReviewEnd] 얼라인 실패 WSI 높이 재판정 진행 안함"));
			m_pSP2P->ISP2P_DisplayMessage(_T("[TEST Process::ReviewEnd] 占쏙옙占쏙옙占?占쏙옙占쏙옙 WSI 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙"));
			break;
			}
			#pragma endregion
			@@ -1711,7 +1732,7 @@

			if (nPixelFilterSize <= nPixelSize && nPixelFilterSize != 0)
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[ReviewEnd] 사이즈 필터링 Pixel Size[%d] nPixelFilterSize [%d]"), nPixelSize,nPixelFilterSize);
			m_pSP2P->ISP2P_DisplayMessage(_T("[ReviewEnd] �� ͸� Pixel Size[%d] nPixelFilterSize [%d]"), nPixelSize,nPixelFilterSize);
			continue;
			}
			#pragma endregion
			@@ -1721,13 +1742,13 @@
			for (int nJudgeindex = 0; nJudgeindex < nJudgeCount; nJudgeindex++)
			{
			//nZoneType = GetZoneType();
			dJudgeHight = pRcpReviewInfo->GetRcpZoneFilteringInfo(nJudgeindex)->GetJudgeHeight(); //높이
			dJudgeHight = pRcpReviewInfo->GetRcpZoneFilteringInfo(nJudgeindex)->GetJudgeHeight(); //��
			nFilterType = pRcpReviewInfo->GetRcpZoneFilteringInfo(nJudgeindex)->m_nFilterType; //ZONE
			nJudge = pRcpReviewInfo->GetRcpZoneFilteringInfo(nJudgeindex)->m_nFilterJudge; //OK TR

			//nZoneNumber = pRcpReviewInfo->GetRcpZoneInfo(nFilterType)->m_vecZoneNumber[0];

			if (pRawData->GetDefectData(nDefectIdx)->m_ReviewDefect.m_nWsi_Type == 2) // 210330 kyh변경
			if (pRawData->GetDefectData(nDefectIdx)->m_ReviewDefect.m_nWsi_Type == 2) // 210330 kyh��
			{

			BOOL isZoneValue = FALSE;
			@@ -1740,7 +1761,7 @@
			}
			else
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[WSIZoneCheck] Zone[%d], DefectIndex[%d]"), nZoneNumber, pRawData->GetDefectData(nDefectIdx)->m_nDefectIdx); //210330 kyh 로그 추가
			m_pSP2P->ISP2P_DisplayMessage(_T("[WSIZoneCheck] Zone[%d], DefectIndex[%d]"), nZoneNumber, pRawData->GetDefectData(nDefectIdx)->m_nDefectIdx); //210330 kyh �α� �߰�
			isZoneValue = TRUE;
			//break;

			@@ -1749,7 +1770,7 @@

			if (isZoneValue == FALSE)
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[WSIZoneCheck] NoFail DefectIndex[%d]"), pRawData->GetDefectData(nDefectIdx)->m_nDefectIdx); //210330 kyh 로그 추가
			m_pSP2P->ISP2P_DisplayMessage(_T("[WSIZoneCheck] NoFail DefectIndex[%d]"), pRawData->GetDefectData(nDefectIdx)->m_nDefectIdx); //210330 kyh �α� �߰�
			continue;
			}

			@@ -1799,13 +1820,13 @@
			}

			}
			else if (fWsiData<=0) // 0이하 값은 재판정 진행을 안한다.
			else if (fWsiData<=0) // 0�� Ѵ�.
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[TEST Process::ReviewEnd] WSI TYPE[%d] WSI 높이[%0.3lf] <= 0 판정 진행 안함"), nJudgeType, fWsiData);
			m_pSP2P->ISP2P_DisplayMessage(_T("[TEST Process::ReviewEnd] WSI TYPE[%d] WSI ��[%0.3lf] <= 0 �� "), nJudgeType, fWsiData);
			}
			else
			{
			//20210419 TR 고정으로 Judge 보다 낮을경우 OK ㄱㄱ
			//20210419 TR 占쏙옙占쏙옙占쏙옙占쏙옙 Judge 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙占?OK 占쏙옙占쏙옙
			//if (nJudge == 1)//TR -> OK
			//{
			if (pRawData->GetDefectData(nDefectIdx)->m_DefectJudgement == DEFECT_JUDGE_CPJT_OK \|\| pRawData->GetDefectData(nDefectIdx)->m_DefectJudgement == DEFECT_JUDGE_CPJT_Unknown)
			@@ -1856,7 +1877,7 @@


			}
			else //WSI TYPE 이 아니면
			else //WSI TYPE �� ƴϸ�
			{
			continue;
			}
			@@ -1870,13 +1891,13 @@
			for (int nJudgeindex = 0; nJudgeindex < nJudgeCount; nJudgeindex++)
			{
			//nZoneType = GetZoneType();
			dJudgeHight = pRcpReviewInfo->GetRcpZoneFilteringInfo_PR(nJudgeindex)->GetJudgeHeight(); //높이
			dJudgeHight = pRcpReviewInfo->GetRcpZoneFilteringInfo_PR(nJudgeindex)->GetJudgeHeight(); //��
			nFilterType = pRcpReviewInfo->GetRcpZoneFilteringInfo_PR(nJudgeindex)->m_nFilterType; //ZONE
			nJudge = pRcpReviewInfo->GetRcpZoneFilteringInfo_PR(nJudgeindex)->m_nFilterJudge; //OK TR

			//nZoneNumber = pRcpReviewInfo->GetRcpZoneInfo(nFilterType)->m_vecZoneNumber[0];

			if (pRawData->GetDefectData(nDefectIdx)->m_ReviewDefect.m_nWsi_Type == 2) // 210330 kyh변경
			if (pRawData->GetDefectData(nDefectIdx)->m_ReviewDefect.m_nWsi_Type == 2) // 210330 kyh��
			{

			BOOL isZoneValue = FALSE;
			@@ -1889,7 +1910,7 @@
			}
			else
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[WSIZoneCheck] Zone[%d], DefectIndex[%d]"), nZoneNumber, pRawData->GetDefectData(nDefectIdx)->m_nDefectIdx); //210330 kyh 로그 추가
			m_pSP2P->ISP2P_DisplayMessage(_T("[WSIZoneCheck] Zone[%d], DefectIndex[%d]"), nZoneNumber, pRawData->GetDefectData(nDefectIdx)->m_nDefectIdx); //210330 kyh �α� �߰�
			isZoneValue = TRUE;
			//break;

			@@ -1898,7 +1919,7 @@

			if (isZoneValue == FALSE)
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[WSIZoneCheck] NoFail DefectIndex[%d]"), pRawData->GetDefectData(nDefectIdx)->m_nDefectIdx); //210330 kyh 로그 추가
			m_pSP2P->ISP2P_DisplayMessage(_T("[WSIZoneCheck] NoFail DefectIndex[%d]"), pRawData->GetDefectData(nDefectIdx)->m_nDefectIdx); //210330 kyh �α� �߰�
			continue;
			}

			@@ -1952,7 +1973,7 @@
			}
			else
			{
			//20210419 TR 고정으로 Judge 보다 낮을경우 OK ㄱㄱ
			//20210419 TR 占쏙옙占쏙옙占쏙옙占쏙옙 Judge 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙占?OK 占쏙옙占쏙옙
			//if (nJudge == 1)//TR -> OK
			//{
			if (pRawData->GetDefectData(nDefectIdx)->m_DefectJudgement == DEFECT_JUDGE_CPJT_OK \|\| pRawData->GetDefectData(nDefectIdx)->m_DefectJudgement == DEFECT_JUDGE_CPJT_Unknown)
			@@ -2004,7 +2025,7 @@


			}
			else //WSI TYPE 이 아니면
			else //WSI TYPE �� ƴϸ�
			{
			continue;
			}
			@@ -2019,7 +2040,7 @@

			strCode =pRcpReviewInfo->GetRcpZoneFilteringInfo_CODE(nJudgeindex)->m_FilterCode;

			if (pRawData->GetDefectData(nDefectIdx)->m_ReviewDefect.m_nWsi_Type == 2) // 210330 kyh변경
			if (pRawData->GetDefectData(nDefectIdx)->m_ReviewDefect.m_nWsi_Type == 2) // 210330 kyh��
			{

			nJudgeType = ReJugdeWSIType(nFilterType);
			@@ -2072,7 +2093,7 @@
			m_pSP2P->ISP2P_DisplayMessage(_T("[TEST Process::ReviewEnd] CODE JUDGE WSI TYPE[%d] Defect CODE [%s] != [%s]"), nJudgeType, strCode, pRawData->GetDefectData(nDefectIdx)->m_strDefectCode);
			}
			}
			else //WSI TYPE 이 아니면
			else //WSI TYPE �� ƴϸ�
			{
			continue;
			}
			@@ -2083,7 +2104,7 @@
			}

			#pragma region CELLJUDGE
			//CELL 재판정////////////////////////////////////////////////////////////////
			//CELL ��////////////////////////////////////////////////////////////////

			int nCellCount = pRawData->GetGlassData()->m_nCellNum;

			@@ -2102,7 +2123,7 @@
			else if (pRawData->GetCellData(nCellIndex)->m_nJudgement == Judge_OK_CPJT)
			{
			nCelllOKJuge = nCelllOKJuge + 1;
			} //taek 21.01.25 Juge 구하는 곳을 새롭게 바꾸자...
			} //taek 21.01.25 Juge ��ϴ� �� Ӱ� �ٲ��...
			else if (pRawData->GetCellData(nCellIndex)->m_nJudgement == Judge_PR_CPJT)
			{
			nCelllPRJuge = nCelllPRJuge + 1;
			@@ -2146,7 +2167,7 @@
			}
			else
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReviewEnd] 카운트 개수가 음수임 [%02d]Cell DefectTRCount[%d] >= [%d]"), nCellIndex, pRawData->GetCellData(nCellIndex)->m_nDefectNumJudgeTR, pRcpJudgeInfo->GetJudgeCount());
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReviewEnd] ī��Ʈ �� [%02d]Cell DefectTRCount[%d] >= [%d]"), nCellIndex, pRawData->GetCellData(nCellIndex)->m_nDefectNumJudgeTR, pRcpJudgeInfo->GetJudgeCount());
			}
			break;
			case JudgeType_T8_PR:
			@@ -2196,7 +2217,7 @@
			}
			else
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReviewEnd] 카운트 개수가 음수임 [%02d]Cell DefectTRCount[%d] <= [%d]"), nCellIndex, pRawData->GetCellData(nCellIndex)->m_nDefectNumJudgeTR, pRcpJudgeInfo->GetSubJudgeCount());
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReviewEnd] ī��Ʈ �� [%02d]Cell DefectTRCount[%d] <= [%d]"), nCellIndex, pRawData->GetCellData(nCellIndex)->m_nDefectNumJudgeTR, pRcpJudgeInfo->GetSubJudgeCount());
			}
			break;
			case JudgeType_T8_PR:
			@@ -2360,7 +2381,7 @@
			}
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReviewEnd] CELL COUNT OK:[%d] TR[%d] PR[%d]"), nCelllOKJuge, nCellTRJudge, nCelllPRJuge);
			#pragma endregion
			//GLASS 재판정////////////////////////////////////////////////////////////////
			//GLASS ��////////////////////////////////////////////////////////////////
			#pragma region GLASSJUDGE
			CRsRcpReviewInfo* pRsRcpReviewInfo = m_pSP2P->ISP2P_Recipe_GetRsRcpReviewInfo();
			if (pRsRcpReviewInfo == NULL) return FALSE;
			@@ -2408,7 +2429,7 @@
			}
			else
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReviewEnd] TR 카운트가 음수임 [%02d]GLASS Defect TR Count[%d] >= [%d]"), nIdx, pRawData->GetGlassData()->m_nDefectNumJudgeTR, pRcpJudgeInfo->GetJudgeCount());
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReviewEnd] TR ī��Ʈ�� [%02d]GLASS Defect TR Count[%d] >= [%d]"), nIdx, pRawData->GetGlassData()->m_nDefectNumJudgeTR, pRcpJudgeInfo->GetJudgeCount());
			}
			break;
			case JudgeType_T8_PR:
			@@ -2458,7 +2479,7 @@
			}
			else
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReviewEnd]TR카운트가 음수임 [%02d]GLASS Defect TR Count[%d] <= [%d]"), nIdx, pRawData->GetGlassData()->m_nDefectNumJudgeTR, pRcpJudgeInfo->GetSubJudgeCount());
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReviewEnd]TRī��Ʈ�� [%02d]GLASS Defect TR Count[%d] <= [%d]"), nIdx, pRawData->GetGlassData()->m_nDefectNumJudgeTR, pRcpJudgeInfo->GetSubJudgeCount());
			}
			break;
			case JudgeType_T8_PR:
			@@ -2646,7 +2667,7 @@
			CakFileUtil akFileFinder;
			while (nReTryTime--)
			{
			//#3359_LYW CF AOI Review REVIEW_LOADING_COMPLETE_TIMEOVER 알람 발생 원인 분석 START
			//#3359_LYW CF AOI Review REVIEW_LOADING_COMPLETE_TIMEOVER �˶� �߻� �� м� START
			if (nReTryTime%2 == 0)
			{
			strFilePath = AOIRAWBIN_PATH;
			@@ -2655,9 +2676,9 @@

			strWild.Format("%s\\%s_*.bin", strFilePath, strFileName);
			akFileFinder.FindFile(strWild.GetBuffer(0), FALSE);
			//LYW LOG추가
			//LYW LOG�߰�
			g_pLog->DisplayMessage(_T("[GlassLoading][FindRawBinFile] Find Path = %s, RetryCount = %d, ResultCode = [%d]"), strFilePath, 30-nReTryTime, GetLastError());
			//#3359_LYW CF AOI Review REVIEW_LOADING_COMPLETE_TIMEOVER 알람 발생 원인 분석 END
			//#3359_LYW CF AOI Review REVIEW_LOADING_COMPLETE_TIMEOVER �˶� �߻� �� м� END
			VECFINDDATA* pFindData = akFileFinder.getFindData();
			int nFileNamePos = strlen(akFileFinder.getProcessPath());
			std::map<LONGLONG, CString> mapSpanFileName;
			@@ -2669,7 +2690,7 @@
			parser.process(pFileName, "_.");
			if (parser.getTokNum() < 4) continue;

			if (parser.getTokNum() >= 6) continue; // 0401 추가
			if (parser.getTokNum() >= 6) continue; // 0401 �߰�

			int nDataTime[8] = {};
			{
			@@ -2697,7 +2718,7 @@
			{
			if (mapSpanFileName.begin()->first < nCloseTime)
			{
			//가장 최근 결과파일 찾기 성공 [김태현 2019/7/17]
			//占쏙옙占쏙옙 占쌍깍옙 占쏙옙占쏙옙占쏙옙占?찾占쏙옙 占쏙옙占쏙옙 [占쏙옙占쏙옙占쏙옙 2019/7/17]
			strFindFile = mapSpanFileName.begin()->second;
			break;
			}
			@@ -2757,7 +2778,7 @@

			int nPCControlReadDataCount = pSignalInfo->GetReadDataAddressCount();

			// [2017:1:9]-[WEZASW] : PCControl GlassData 항목 재정의.
			// [2017:1:9]-[WEZASW] : PCControl GlassData �׸� ��.
			if(pSignalInfo->GetUseContinuousReadAddress())
			{
			CString strReadAddress = _T("");
			@@ -3127,7 +3148,7 @@
			strReadData = pTransferData->strRerferData;
			break;
			}
			//m_pSP2P->ISP2P_DisplayMessage(_T("[ReadTransferData] Name: %s, Addr: %s, Size: %d, Data: %s"), pInfo->strName, strReadAddress, nReadSize, strReadData); //0517
			// m_pSP2P->ISP2P_DisplayMessage(_T("[ReadTransferData] Name: %s, Addr: %s, Size: %d, Data: %s"), pInfo->strName, strReadAddress, nReadSize, strReadData); //0517
			}
			}

			@@ -3136,11 +3157,11 @@

			void CSequenceProcessor_CPJT::UpdateGlassResultFromTransferData(CGlassResult pGlassResult, STransferData pTransferData)
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] Transfer Data 읽기!"));
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] Transfer Data �б�!"));

			if (pGlassResult==NULL \|\| pTransferData==NULL) return;

			// [2017:1:9]-[WEZASW] : PCControl GlassData 항목 재정의
			// [2017:1:9]-[WEZASW] : PCControl GlassData �׸� ��
			// transfer data is not exist
			if (pTransferData->strLotID.GetLength()<1)
			{
			@@ -3209,10 +3230,10 @@
			pGlassResult->m_strPairFlag = pTransferData->strPairFlag;
			pGlassResult->m_strOptionValue = pTransferData->strOptionValue;
			pGlassResult->m_strReserved = pTransferData->strReserved;
			pGlassResult->strGlassScanSchedule = pTransferData->strGlassScanSchedule;//분판 정보 cmark
			pGlassResult->strGlassScanSchedule = pTransferData->strGlassScanSchedule;//�� cmark
			pGlassResult->m_strRTMSStepID = pTransferData->strStepID; //taek 210126

			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] Transfer Data 끝!"));
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] Transfer Data ��!"));
			}

			void CSequenceProcessor_CPJT::UpdateHistoryResultFromTransferData(CGlassResult pHistoryResult, CGlassResult pGlassResult)
			@@ -3270,7 +3291,7 @@
			pHistoryResult->m_strPairFlag = pGlassResult->m_strPairFlag;
			pHistoryResult->m_strOptionValue = pGlassResult->m_strOptionValue;
			pHistoryResult->m_strReserved = pGlassResult->m_strReserved;
			pHistoryResult->strGlassScanSchedule = pGlassResult->strGlassScanSchedule;//분판 정보 cmark
			pHistoryResult->strGlassScanSchedule = pGlassResult->strGlassScanSchedule;//�� cmark
			pHistoryResult->m_strStepID = pGlassResult->m_strRTMSStepID; //taek 210126
			pHistoryResult->m_strEquipID = pGlassResult->m_strEquipID;
			pHistoryResult->m_strProcessID = pGlassResult->m_strProcessID;
			@@ -3282,7 +3303,7 @@

			void CSequenceProcessor_CPJT::CreateResultDirectory(const CString& strGlassID, const CString& strDate)
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] 디렉토리 만들기 시작"));
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] 占쏙옙占썰리 占쏙옙占쏙옙占?占쏙옙占쏙옙"));
			if (m_pSP2P==NULL) return;

			const CNetworkInfo *pNetworkInfo = m_pSP2P->ISP2P_System_GetNetworkInfo();
			@@ -3328,7 +3349,7 @@
			strPath.Format(_T("%s\\%s"),pNetworkInfo->m_strAlignImagePath, strGlassID);
			CreateDirectory(strPath, NULL);
			}
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] 디렉토리 만들기 끝"));
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] 占쏙옙占썰리 占쏙옙占쏙옙占?占쏙옙"));
			}


			@@ -3336,7 +3357,7 @@

			void CSequenceProcessor_CPJT::SetSaveImageBasePathToReviewProcessor(const CString& strGlassID, const CString& strResultDate)
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] 이미지 패스 만들기 시작"));
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] 占싱뱄옙占쏙옙 占싻쏙옙 占쏙옙占쏙옙占?占쏙옙占쏙옙"));
			const CNetworkInfo *pNetworkInfo = m_pSP2P->ISP2P_System_GetNetworkInfo();
			if(pNetworkInfo == NULL) return;

			@@ -3344,6 +3365,7 @@
			if(pReviewProcessor == NULL) return;

			CString strPath = _T("");
			CString strImagePath = _T("");
			if(pNetworkInfo->m_strLocalImagePath.IsEmpty() == FALSE && strGlassID.IsEmpty() == FALSE)
			{
			CTime snapTime = CTime::GetCurrentTime();
			@@ -3380,11 +3402,11 @@
			Sleep(1000);
			if (CDitGlassRawClient::GetInstance()->isConnect() == FALSE)
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::GlassLoading]공유메모리 연결 실패 Count[%d]"), nReconnect);
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::GlassLoading]��޸� �� Count[%d]"), nReconnect);
			}
			else
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::GlassLoading]공유메모리 연결 성공"));
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::GlassLoading]��޸� �� "));
			break;
			}
			nReconnect += 1;
			@@ -3399,25 +3421,29 @@
			{

			strPath.Format(_T("%s\\%s_%04d%02d%02d%02d%02d%02d"), pNetworkInfo->m_strUploadImagePath, strGlassID, tmServerLoadingTime.GetYear(), tmServerLoadingTime.GetMonth(), tmServerLoadingTime.GetDay(), tmServerLoadingTime.GetHour(), tmServerLoadingTime.GetMinute(), tmServerLoadingTime.GetSecond());
			strImagePath.Format(_T("%s_%04d%02d%02d%02d%02d%02d"), strGlassID, tmServerLoadingTime.GetYear(), tmServerLoadingTime.GetMonth(), tmServerLoadingTime.GetDay(), tmServerLoadingTime.GetHour(), tmServerLoadingTime.GetMinute(), tmServerLoadingTime.GetSecond());
			CreateDirectory(strPath, NULL);
			pReviewProcessor->SetUploadImagePath(strPath);
			pReviewProcessor->SetReviewImagePath(strImagePath);
			}
			else
			{
			tmServerLoadingTime = CTime::GetCurrentTime();
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::GlassLoading] 공유메모리 접근이상"));
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::GlassLoading] ��޸� ��̻�"));
			strPath.Format(_T("%s\\%s_%04d%02d%02d%02d%02d%02d"), pNetworkInfo->m_strUploadImagePath, strGlassID, tmServerLoadingTime.GetYear(), tmServerLoadingTime.GetMonth(), tmServerLoadingTime.GetDay(), tmServerLoadingTime.GetHour(), tmServerLoadingTime.GetMinute(), tmServerLoadingTime.GetSecond());
			strImagePath.Format(_T("%s\\%s_%04d%02d%02d%02d%02d%02d"), strGlassID, tmServerLoadingTime.GetYear(), tmServerLoadingTime.GetMonth(), tmServerLoadingTime.GetDay(), tmServerLoadingTime.GetHour(), tmServerLoadingTime.GetMinute(), tmServerLoadingTime.GetSecond());
			CreateDirectory(strPath, NULL);
			pReviewProcessor->SetUploadImagePath(strPath);
			pReviewProcessor->SetReviewImagePath(strImagePath);
			}

			}
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] 이미지 패스 만들기 끝"));
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] 占싱뱄옙占쏙옙 占싻쏙옙 占쏙옙占쏙옙占?占쏙옙"));
			}

			void CSequenceProcessor_CPJT::SetSaveImageBasePathToAlignCameraControl(const CString& strGlassID)
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] 얼라인 이미지 패스 시작 "));
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] 占쏙옙占쏙옙占?占싱뱄옙占쏙옙 占싻쏙옙 占쏙옙占쏙옙 "));
			const CNetworkInfo *pNetworkInfo = m_pSP2P->ISP2P_System_GetNetworkInfo();
			if(pNetworkInfo == NULL) return;

			@@ -3430,7 +3456,7 @@
			strPath.Format(_T("%s\\%s"), pNetworkInfo->m_strAlignImagePath, strGlassID);
			pAlignCameraControl->SetSaveImageBasePath(strPath);
			}
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] 얼라인 이미지 패스 끝 "));
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::Loading] 占쏙옙占쏙옙占?占싱뱄옙占쏙옙 占싻쏙옙 占쏙옙 "));
			}

			BOOL CSequenceProcessor_CPJT::ReadRecipeDataFromRecipeFile(const CString& strPPID_RC, CString& strRecipeName)// const CString& strPPID, CString& strRecipeName
			@@ -3497,14 +3523,14 @@
			{
			if(pGlassResult == NULL) return FALSE;

			// 레시피 설정
			// ��
			const CRsRcpReviewInfo* pRsRcpReviewInfo = m_pSP2P->ISP2P_Recipe_GetRsRcpReviewInfo();
			if (pRsRcpReviewInfo==NULL) return FALSE;

			// system info
			const CSystemInfo* pSystemInfo = m_pSP2P->ISP2P_System_GetSystemInfo();

			// 글라스 정보
			// �۶� ��
			STransferData* pTransferData = m_pSP2P->ISP2P_GetCurrentTransferData();
			if (pTransferData==NULL) return FALSE;
			int nGlassTypeInfoIndex = 0;
			@@ -3520,20 +3546,20 @@
			if (pGlassTypeInfo == NULL) return FALSE;
			m_pSP2P->ISP2P_DisplayMessage(_T("GlassTypeName : %s,GlassTypeIdx : %s"),pGlassTypeInfo->m_strGlassTypeName,pTransferData->strGlassScanSchedule);

			// 모터 정보
			// ��
			const CMotorControlInfo *pMotorInfo = m_pSP2P->ISP2P_System_GetMotorInfo();

			// 좌표 변환기
			// ��ǥ ��ȯ��
			CCoordCalibrator* pCoordCalibrator = m_pSP2P->ISP2P_GetCoordCalibrator();

			// 좌표계 설정
			// ��ǥ��
			if (pSystemInfo && pGlassTypeInfo && pMotorInfo && pCoordCalibrator)
			{
			// Get Direction
			int nDirectionX = GetDirectionX(pGlassTypeInfo->m_nOriginDirection, pMotorInfo->GetOriginDirection());
			int nDirectionY = GetDirectionY(pGlassTypeInfo->m_nOriginDirection, pMotorInfo->GetOriginDirection());

			// 좌표계 설정
			// ��ǥ��
			pCoordCalibrator->SetTransDirection(nDirectionX, nDirectionY);
			pCoordCalibrator->SetOriginMotorPosition(pGlassTypeInfo->m_dOriginMotorX, pGlassTypeInfo->m_dOriginMotorY);
			if (fabs(pGlassTypeInfo->m_dAlignAngle) > 0.0000001)
			@@ -3542,7 +3568,7 @@
			pGlassTypeInfo->m_dFirstAlignGlassX, pGlassTypeInfo->m_dFirstAlignGlassY, pGlassTypeInfo->m_dAlignAngle);
			}

			// 글라스 정보 설정
			// �۶� ��
			pGlassResult->SetGlassSize(pGlassTypeInfo->m_nGlassSizeX * 1000, pGlassTypeInfo->m_nGlassSizeY * 1000);
			pGlassResult->SetGlassOriginDirection(pGlassTypeInfo->m_nOriginDirection);
			pGlassResult->SetCornerCutDirection(pGlassTypeInfo->m_nCornerCutDirection);
			@@ -3551,34 +3577,34 @@
			pGlassResult->SetCollisionDistanceX(int(pSystemInfo->m_dCollisionDistance*1000.));
			}

			// Align 정보
			// Align ��
			const CRsRcpAlignInfo* pRsRcpAlignInfo = m_pSP2P->ISP2P_Recipe_GetRsRcpAlignInfo();

			// Align 정보 설정
			// Align ��
			if (pGlassTypeInfo && pRsRcpAlignInfo)
			{
			// Align 마크 정보 설정 (픽셀, 모터, 글라스 위치)
			// Align ��ũ �� (�ȼ�, ��, �۶� ��ġ)
			pGlassResult->m_AlignRecipe.m_nUseAlignPosMove = pGlassTypeInfo->m_nUseAlignPosMove;

			// 픽셀 위치
			// �ȼ� ��ġ
			pGlassResult->m_AlignRecipe.dOriginPixelX[0] = pGlassTypeInfo->m_nFirstAlignFindPixelX;
			pGlassResult->m_AlignRecipe.dOriginPixelY[0] = pGlassTypeInfo->m_nFirstAlignFindPixelY;
			pGlassResult->m_AlignRecipe.dOriginPixelX[1] = pGlassTypeInfo->m_nSecondAlignFindPixelX;
			pGlassResult->m_AlignRecipe.dOriginPixelY[1] = pGlassTypeInfo->m_nSecondAlignFindPixelY;

			// 모터 위치
			// �� ġ
			pGlassResult->m_AlignRecipe.dOriginPositionX[0] = pGlassTypeInfo->m_dFirstAlignMotorX;
			pGlassResult->m_AlignRecipe.dOriginPositionY[0] = pGlassTypeInfo->m_dFirstAlignMotorY;
			pGlassResult->m_AlignRecipe.dOriginPositionX[1] = pGlassTypeInfo->m_dSecondAlignMotorX;
			pGlassResult->m_AlignRecipe.dOriginPositionY[1] = pGlassTypeInfo->m_dSecondAlignMotorY;

			// 글라스 위치
			// �۶� ��ġ
			pGlassResult->m_AlignRecipe.dGlassPositionX[0] = pGlassTypeInfo->m_dFirstAlignGlassX;
			pGlassResult->m_AlignRecipe.dGlassPositionY[0] = pGlassTypeInfo->m_dFirstAlignGlassY;
			pGlassResult->m_AlignRecipe.dGlassPositionX[1] = pGlassTypeInfo->m_dSecondAlignGlassX;
			pGlassResult->m_AlignRecipe.dGlassPositionY[1] = pGlassTypeInfo->m_dSecondAlignGlassY;

			// Align Recipe 정보 설정 자동광량 찾기 파라미터
			// Align Recipe 占쏙옙占쏙옙 占쏙옙占쏙옙 占쌘듸옙占쏙옙占쏙옙 찾占쏙옙 占식띰옙占쏙옙占?
			// Align Skip Mode
			pGlassResult->m_AlignRecipe.bAlignSkipMode = pRsRcpAlignInfo->m_bAlignSkipMode;
			pGlassResult->m_AlignRecipe.bUseTotalPitchMeasure = pRsRcpAlignInfo->m_bTotalPitchMeasure;
			@@ -3598,29 +3624,29 @@
			pGlassResult->m_AlignRecipe.nMergeRange = pRsRcpAlignInfo->m_nMergeRange;
			pGlassResult->m_AlignRecipe.dEdgeRate = pRsRcpAlignInfo->m_dEdgeRate;

			// 노출시간
			// 占쏙옙占쏙옙챨占?
			pGlassResult->m_AlignRecipe.bManualProcess = pRsRcpAlignInfo->m_bManualProcess;
			pGlassResult->m_AlignRecipe.dFirstCamExposure = pRsRcpAlignInfo->m_dFirstCamExposure;
			pGlassResult->m_AlignRecipe.dSecondCamExposure = pRsRcpAlignInfo->m_dSecondCamExposure;

			// 자동광량 조건
			// �ڵ��
			pGlassResult->m_AlignRecipe.bAutoProcess = pRsRcpAlignInfo->m_bAutoProcess;
			pGlassResult->m_AlignRecipe.dTargetMin = pRsRcpAlignInfo->m_dTargetMin;
			pGlassResult->m_AlignRecipe.dTargetMax = pRsRcpAlignInfo->m_dTargetMax;
			pGlassResult->m_AlignRecipe.dExposureMin = pRsRcpAlignInfo->m_dExposureMin;
			pGlassResult->m_AlignRecipe.dExposureMax = pRsRcpAlignInfo->m_dExposureMax;

			// Align Recipe 정보 설정 rotate info
			// Align Recipe �� rotate info
			pGlassResult->m_AlignRecipe.bRotateProcess = pRsRcpAlignInfo->m_bRotateProcess;
			pGlassResult->m_AlignRecipe.nRetryCount = pRsRcpAlignInfo->m_nRetryCount;
			pGlassResult->m_AlignRecipe.dGlassAngleMin = pRsRcpAlignInfo->m_dGlassAngleMin;
			pGlassResult->m_AlignRecipe.dGlassAngleMax = pRsRcpAlignInfo->m_dGlassAngleMax;

			// Align 카메라 방향 및 해상도 설정
			// Align ī�޶� �� ػ� ��
			int nAlignCameraInfoCount = 2;
			for(int nAlignCameraIdx = 0; nAlignCameraIdx < nAlignCameraInfoCount; nAlignCameraIdx++)
			{
			// Align 조명 값 가져오기.
			// Align �� .
			int nLightValue = 0;


			@@ -3628,10 +3654,10 @@
			{
			nLightValue = (nAlignCameraIdx==0) ? (int)pRsRcpAlignInfo->m_dFirstCamExposure: (int)pRsRcpAlignInfo->m_dSecondCamExposure;

			// 얼라인 카메라 정보 가져오기
			// 占쏙옙占쏙옙占?카占쌨띰옙 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙占쏙옙
			const CAlignCameraInfo *pCameraInfo = m_pSP2P->ISP2P_System_GetAlignCameraInfo(nAlignCameraIdx);

			//조명값 변경.
			//占쏙옙占쏙옙占?占쏙옙占쏙옙.
			CLightControl *pLightControl = NULL;

			const CLightControlInfo *AlignLightinfo = pCameraInfo->GetLightContorlInfo();
			@@ -3640,8 +3666,8 @@
			{
			if (AlignLightinfo->GetMaster()==1&& nAlignCameraIdx==1)
			{
			//얼라인 컨틀롤러가 하나만 연결되어 있을때 마스터 여부로 확인
			//솔직히 이거 맞는지 모르겟다 아무도 안알랴쥼
			//占쏙옙占쏙옙占?占쏙옙틀占싼뤄옙占쏙옙 占싹놂옙占쏙옙 占쏙옙占쏙옙퓸占?占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙 占쏙옙占싸뤄옙 확占쏙옙
			//�� ̰� �´�� 𸣰ٴ� �ƹ�� Ⱦ˷��
			pLightControl = m_pSP2P->ISP2P_GetAlignLightControl(0);

			}
			@@ -3676,7 +3702,7 @@
			}


			// 얼라인 카메라 정보 가져오기
			// 占쏙옙占쏙옙占?카占쌨띰옙 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙占쏙옙
			const CAlignCameraInfo *pCameraInfo = m_pSP2P->ISP2P_System_GetAlignCameraInfo(nAlignCameraIdx);
			if (pCameraInfo)
			{
			@@ -3704,7 +3730,7 @@
			}
			}

			// 얼라인 템플릿 정보 가져오기
			// 占쏙옙占쏙옙占?占쏙옙占시몌옙 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙占쏙옙
			if((int)pGlassTypeInfo->m_vecTemplateImagePath.size() == nAlignCameraInfoCount)
			{
			pGlassResult->m_AlignRecipe.strTemplateName[nAlignCameraIdx] = pGlassTypeInfo->m_vecTemplateImagePath[nAlignCameraIdx];
			@@ -3733,14 +3759,14 @@
			if (pRcpReviewAFMInfo)
			{
			int nRealAFMIndex = pRcpReviewAFMInfo->m_nRecipeIndex;
			if(nRealAFMIndex == -1)// 레시피에 선택된 배율의 실제 MagnificInfo Index를 알아옴
			if(nRealAFMIndex == -1)// ��ǿ� ��õ� �� MagnificInfo Index�� ˾ƿ�
			{
			//-1의 경우 배율 인덱스 가져다 씀.
			//-1占쏙옙 占쏙옙占?占쏙옙占쏙옙 占싸듸옙占쏙옙 占쏙옙占쏙옙占쏙옙 占쏙옙.
			nRealAFMIndex = GetRealMagnification(nModuleIdx, pRcpReviewAFMInfo->m_nZoomIndex);
			}
			AFM_SetAFMRecipeName(nModuleIdx, strRecipeName, nRealAFMIndex);

			if(pRcpReviewAFMInfo->m_bAFMHomeOffMode==TRUE) //190618AFM홈 시퀀스 진행 X
			if(pRcpReviewAFMInfo->m_bAFMHomeOffMode==TRUE) //190618AFMȨ �� X
			{
			SetUseAfmHomePosition(FALSE);
			}
			@@ -3752,7 +3778,7 @@
			}
			}

			// 결함 찾기 레시피 설정
			// �� ã��
			CReviewProcessor* pReviewProcessor = m_pSP2P->ISP2P_GetReviewProcessor();
			const CRsRcpDefectFindInfo* pRsRcpDefectFindInfo = m_pSP2P->ISP2P_Recipe_GetRsRcpDefectFindInfo();
			if(pReviewProcessor && pRsRcpDefectFindInfo)
			@@ -3803,7 +3829,7 @@

			CString strRawTDPath=_T(""), strRawCDPath=_T(""), strRawSDPath=_T("");

			// 결과파일 이름 찾기
			// 占쏙옙占쏙옙占쏙옙占?占싱몌옙 찾占쏙옙
			FindAOIRawFilePath(pGlassResult, &strRawTDPath, &strRawCDPath, &strRawSDPath);

			bRet = m_pSP2P->ISP2P_ReadAOIRawFileToGlassResult(strRawTDPath);
			@@ -3857,7 +3883,7 @@
			if(finder.IsDots()) continue;
			if(finder.IsDirectory()) continue;

			// [2017:5:16]-[WEZASW] : AOI Server의 결함 파일 위치에 결함맵 이미지 파일 존재로 결합 파일만 추출
			// [2017:5:16]-[WEZASW] : AOI Server占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙치占쏙옙 占쏙옙占쌉몌옙 占싱뱄옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙占?占쏙옙占쏙옙 占쏙옙占싹몌옙 占쏙옙占쏙옙
			sRawFile.strFileName = finder.GetFileName();
			strExtTemp = sRawFile.strFileName;
			int nIdx = strExtTemp.Remove('.');
			@@ -4035,7 +4061,7 @@
			CModuleStatus* pModuleStatus = Module_GetModuleStatus(nModuleIdx);
			if (pModuleStatus == NULL) continue;

			//충돌거리 넣기
			//�浹�Ÿ� �ֱ�
			{

			double dCollisionPosX = pReviewResult->GetCollisionPositionX() / 1000.0;
			@@ -4076,13 +4102,13 @@

			}

			//좌우 겐트리 동시이동
			//�¿� ��Ʈ�� ̵�
			pMotorControl->GantrySetTwoGantrySyncModeSend(0);

			// set result index
			int nStartIdx = pReviewResult->GetStartSReviewResultIndex();
			int nEndIdx = pReviewResult->GetEndSReviewResultIndex();
			nEndIdx = min(nEndIdx, (pReviewResult->GetSReviewResultCount()-1)) + 1; // End Index 다시설정
			nEndIdx = min(nEndIdx, (pReviewResult->GetSReviewResultCount()-1)) + 1; // End Index �ٽü��

			double xpostemp, ypostemp;
			// get review pos
			@@ -4092,7 +4118,7 @@
			SReviewResult* pReview = pReviewResult->GetSReviewResult(nResultIdx);
			if (pReview==NULL) continue;

			//200개 어드레스를 보낸후 완료시점에서 중복체크
			//200占쏙옙 占쏙옙藥뱄옙占쏙옙占?占쏙옙占쏙옙占쏙옙 占싹뤄옙占쏙옙占쏙옙占쏙옙占?占쌩븝옙체크
			if (pReview->bCheckSendToMotor == FALSE)
			{
			pReview->bCheckSendToMotor = TRUE;
			@@ -4139,7 +4165,7 @@
			}
			}

			//보낼 포인트가 있는지 없는지 체크
			//�� Ʈ�� ִ�� üũ
			if (vectorPosX.empty() ==TRUE)
			{
			g_pLog->DisplayMessage(_T("[GantryAutoGo] No Exist Send Point "), vectorPosX.size());
			@@ -4171,13 +4197,13 @@
			int nTickCount = GetTickCount();
			while (1)
			{
			//5초 오버타임
			//5�� Ÿ��
			if ((GetTickCount() - nTickCount) > 5000)
			{
			bOverTime = TRUE;
			break;
			}
			//모터 모션 End 체크
			//占쏙옙占쏙옙 占쏙옙占?End 체크
			if (pMotorControl->IsGantryMotionEnd(pModuleStatus->GetGantryIndex()) == TRUE)
			{
			if (pMotorControl->GantryAutoGo(pModuleStatus->GetGantryIndex(), vectorPosX, vectorPosY, TRUE))
			@@ -4196,15 +4222,15 @@

			}

			//5초후에도 안움직인다? 그럼 3번 재시도 ㄱㄱ
			//모션End 가 잘못 나올수도 있으니
			//5占쏙옙占식울옙占쏙옙 占싫울옙占쏙옙占싸댐옙? 占쌓뤄옙 3占쏙옙 占쏙옙천占?占쏙옙占쏙옙
			//��End �� ߸� ��ü��
			if (bOverTime == TRUE)
			{
			for (int i = 0; i < 3; i++)
			{
			Sleep(1000);

			//모터가 움직일수 없는상태일때 Send 신호시 Fail 발생 가능 Retry 3번 ㄱㄱ
			//��Ͱ� ��ϼ� ��»��϶� Send ��ȣ�� Fail �߻� �� Retry 3��
			if (pMotorControl->GantryAutoGo(pModuleStatus->GetGantryIndex(), vectorPosX, vectorPosY, TRUE))
			{
			nTotalCount += (int)vectorPosX.size();
			@@ -4278,7 +4304,7 @@
			if(pGlassResult && pReviewProcessor)
			{
			// UserStart
			pReviewProcessor->SetJobID(pGlassResult->m_strJobID); //pGlassResult->m_strGlassID -> pGlassResult->m_strJobID 변경
			pReviewProcessor->SetJobID(pGlassResult->m_strJobID); //pGlassResult->m_strGlassID -> pGlassResult->m_strJobID ��
			pReviewProcessor->SetOperID(pGlassResult->m_strOperID);
			m_pSP2P->ISP2P_UpdateReviewProcessStatus(ReviewProcessStatus_UserStart, nPlanIndex);

			@@ -4341,7 +4367,7 @@
			CModuleStatus* pModuleStatus = Module_GetModuleStatus(nModuleIdx);
			if (pModuleStatus == NULL) continue;

			//충돌거리 넣기
			//�浹�Ÿ� �ֱ�
			{

			double dCollisionPosX = pReviewResult->GetCollisionPositionX() / 1000.0;
			@@ -4384,9 +4410,9 @@
			// set result index
			int nStartIdx = pReviewResult->GetStartSReviewResultIndex();
			int nEndIdx = pReviewResult->GetEndSReviewResultIndex();
			nEndIdx = min(nEndIdx, (pReviewResult->GetSReviewResultCount() - 1)) + 1; // End Index 다시설정
			nEndIdx = min(nEndIdx, (pReviewResult->GetSReviewResultCount() - 1)) + 1; // End Index �ٽü��

			// [2017:3:8]-[WEZASW] : CameraOffset 범위 변경 (-1~1 => -5~5)
			// [2017:3:8]-[WEZASW] : CameraOffset �� (-1~1 => -5~5)
			double m_dMinOffset = -5.0;
			double m_dMaxOffset = 5.0;
			double xpostemp, ypostemp;
			@@ -4397,7 +4423,7 @@
			SReviewResult* pReview = pReviewResult->GetSReviewResult(nResultIdx);
			if (pReview == NULL) continue;

			//200개 어드레스를 보낸후 완료시점에서 중복체크
			//200占쏙옙 占쏙옙藥뱄옙占쏙옙占?占쏙옙占쏙옙占쏙옙 占싹뤄옙占쏙옙占쏙옙占쏙옙占?占쌩븝옙체크
			if (pReview->bCheckSendToMotor == FALSE)
			{
			pReview->bCheckSendToMotor = TRUE;
			@@ -4445,7 +4471,7 @@
			}
			}

			//보낼 포인트가 있는지 없는지 체크
			//�� Ʈ�� ִ�� üũ
			if (vectorPosX.empty() == TRUE)
			{
			g_pLog->DisplayMessage(_T("[GantryAutoGo] No Exist Send Point "), vectorPosX.size());
			@@ -4510,7 +4536,7 @@
			if(pGlassResult && pReviewProcessor)
			{
			// WsiStart
			pReviewProcessor->SetJobID(pGlassResult->m_strJobID); // pGlassResult->m_strGlassID -> pGlassResult->m_strJobID 변경
			pReviewProcessor->SetJobID(pGlassResult->m_strJobID); // pGlassResult->m_strGlassID -> pGlassResult->m_strJobID ��
			pReviewProcessor->SetOperID(pGlassResult->m_strOperID);
			m_pSP2P->ISP2P_UpdateReviewProcessStatus(ReviewProcessStatus_WSIStart, nPlanIndex);

			@@ -4523,7 +4549,7 @@
			MakeWSIUpLoadDirectory(pReviewProcessor->GetUploadImagePath());

			//20190219 chm
			pReviewProcessor->SetReviewCount(0); // 리뷰 Sequence No 초기화.
			pReviewProcessor->SetReviewCount(0); // �� Sequence No �ʱ�ȭ.

			return TRUE;
			}
			@@ -4536,7 +4562,7 @@
			strPath = strPath + _T("\\WSI");
			if(CreateDirectory(strPath,NULL)==FALSE)
			{
			//LYW LOG추가
			//LYW LOG�߰�
			g_pLog->DisplayMessage(_T("[MakeWSIUpLoadDirectory]Directory Create Fail %s, ERROR CODE = %d "),strPath, GetLastError());
			}

			@@ -4576,8 +4602,10 @@

			VectorDouble vectorCollisionPosX;
			vectorCollisionPosX.clear();


			//WSI �¿� ��Ʈ�� ̵�
			pMotorControl->GantrySetTwoGantrySyncModeSend(1);

			// WSI result count
			for (int nModuleIdx = 0; nModuleIdx < Module_GetModuleStatusCount(); nModuleIdx++)
			{
			@@ -4588,7 +4616,7 @@
			CModuleStatus* pModuleStatus = Module_GetModuleStatus(nModuleIdx);
			if (pModuleStatus == NULL) continue;

			//충돌거리 넣기
			//�浹�Ÿ� �ֱ�
			{
			double dCollisionPosX = pWsiResult->GetCollisionPositionX() / 1000.0;
			double dCollisionPosY = 0.0;
			@@ -4623,15 +4651,13 @@
			return 0;
			}
			}
			//WSI 좌우 겐트리 동시이동
			pMotorControl->GantrySetTwoGantrySyncModeSend(1);

			// get result index
			int nStartIdx = pWsiResult->GetStartSReviewResultIndex();
			int nEndIdx = pWsiResult->GetEndSReviewResultIndex();
			nEndIdx = min(nEndIdx, (pWsiResult->GetSReviewResultCount() - 1)) + 1; // set End Index

			// [2017:3:8]-[WEZASW] : CameraOffset 범위 변경 (-1~1 => -5~5)
			// [2017:3:8]-[WEZASW] : CameraOffset �� (-1~1 => -5~5)
			double m_dMinOffset = -5.0;
			double m_dMaxOffset = 5.0;

			@@ -4643,7 +4669,7 @@
			SReviewResult* pWsi = pWsiResult->GetSReviewResult(nResultIdx);
			if (pWsi == NULL) continue;

			//200개 어드레스를 보낸후 완료시점에서 중복체크
			//200占쏙옙 占쏙옙藥뱄옙占쏙옙占?占쏙옙占쏙옙占쏙옙 占싹뤄옙占쏙옙占쏙옙占쏙옙占?占쌩븝옙체크
			if (pWsi->bCheckWSISendToMotor == FALSE)
			{
			pWsi->bCheckWSISendToMotor = TRUE;
			@@ -4690,14 +4716,14 @@
			}
			}

			//보낼 포인트가 있는지 없는지 체크
			//�� Ʈ�� ִ�� üũ
			if (vectorPosX.empty() == TRUE)
			{
			//3360 LYW_ CF AOI QD Review WSI XY MotorMoving Error 알람 발생 원인 분석 및 조치 START
			//3360 LYW_ CF AOI QD Review WSI XY MotorMoving Error �˶� �߻� �� м� �� ġ START
			g_pLog->DisplayMessage(_T("[GantryAutoGo] No Exist Send Point,TwoGantrySyncMode OFF!"), vectorPosX.size());
			g_pLog->DisplayMessage(_T("[GantryAutoGo] (%d)Gantry Path Send Fail"), pModuleStatus->GetGantryIndex()); //taek 210128
			pMotorControl->GantrySetTwoGantrySyncModeSend(0);
			//3360 LYW_ CF AOI QD Review WSI XY MotorMoving Error 알람 발생 원인 분석 및 조치 END
			//3360 LYW_ CF AOI QD Review WSI XY MotorMoving Error �˶� �߻� �� м� �� ġ END
			}
			else
			{
			@@ -4721,13 +4747,13 @@
			int nTickCount = GetTickCount();
			while (1)
			{
			//5초 오버타임
			//5�� Ÿ��
			if ((GetTickCount() - nTickCount) > 5000)
			{
			bOverTime = TRUE;
			break;
			}
			//모터 모션 End 체크
			//占쏙옙占쏙옙 占쏙옙占?End 체크
			if (pMotorControl->IsGantryMotionEnd(pModuleStatus->GetGantryIndex()) == TRUE)
			{
			if (pMotorControl->GantryAutoGo(pModuleStatus->GetGantryIndex(), vectorPosX, vectorPosY, TRUE))
			@@ -4746,15 +4772,15 @@

			}

			//5초후에도 안움직인다? 그럼 3번 재시도 ㄱㄱ
			//모션End 가 잘못 나올수도 있으니
			//5占쏙옙占식울옙占쏙옙 占싫울옙占쏙옙占싸댐옙? 占쌓뤄옙 3占쏙옙 占쏙옙천占?占쏙옙占쏙옙
			//��End �� ߸� ��ü��
			if (bOverTime == TRUE)
			{
			for (int i = 0; i < 3; i++)
			{
			Sleep(1000);

			//모터가 움직일수 없는상태일때 Send 신호시 Fail 발생 가능 Retry 3번 ㄱㄱ
			//��Ͱ� ��ϼ� ��»��϶� Send ��ȣ�� Fail �߻� �� Retry 3��
			if (pMotorControl->GantryAutoGo(pModuleStatus->GetGantryIndex(), vectorPosX, vectorPosY, TRUE))
			{
			nTotalCount += (int)vectorPosX.size();
			@@ -4889,9 +4915,9 @@
			// get result index
			int nStartIdx = pReviewResult->GetStartSReviewResultIndex();
			int nEndIdx = pReviewResult->GetEndSReviewResultIndex();
			nEndIdx = min(nEndIdx, (pReviewResult->GetSReviewResultCount()-1)) + 1; // End Index 다시설정
			nEndIdx = min(nEndIdx, (pReviewResult->GetSReviewResultCount()-1)) + 1; // End Index �ٽü��

			// [2017:3:8]-[WEZASW] : CameraOffset 범위 변경 (-1~1 => -5~5)
			// [2017:3:8]-[WEZASW] : CameraOffset �� (-1~1 => -5~5)
			double m_dMinOffset = -5.0;
			double m_dMaxOffset = 5.0;

			@@ -4993,7 +5019,7 @@
			if(pGlassResult && pReviewProcessor)
			{
			// MeasureStart
			pReviewProcessor->SetJobID(pGlassResult->m_strJobID); // pGlassResult->m_strGlassID -> pGlassResult->m_strJobID 변경
			pReviewProcessor->SetJobID(pGlassResult->m_strJobID); // pGlassResult->m_strGlassID -> pGlassResult->m_strJobID ��
			pReviewProcessor->SetOperID(pGlassResult->m_strOperID);
			m_pSP2P->ISP2P_UpdateReviewProcessStatus(ReviewProcessStatus_MeasureStart, nPlanIndex);

			@@ -5068,7 +5094,7 @@
			const SCoordInfo* pCoordInfo = Module_GetCoordInfo(nModuleIdx);
			if(pCoordInfo == NULL) continue;

			// [2017:3:8]-[WEZASW] : CameraOffset 범위 변경 (-1~1 => -5~5)
			// [2017:3:8]-[WEZASW] : CameraOffset �� (-1~1 => -5~5)
			double m_dMinOffset = -5.0;
			double m_dMaxOffset = 5.0;

			@@ -5174,7 +5200,7 @@
			int nTotalCount = 0;
			double dDefectPosX, dDefectPosY;

			// Module의 위치에 따른 ModuleStatus sorting
			// Module�� ġ�� ModuleStatus sorting
			std::vector<CModuleStatus*> SortedModuleStatus;
			for(int nModuleIdx = 0; nModuleIdx < m_pSP2P->ISP2P_GetModuleStatusCount(); nModuleIdx++)
			{
			@@ -5228,7 +5254,7 @@
			const SCoordInfo* pCoordInfo = Module_GetCoordInfo(pReviewResult->GetModuleIndex());
			if(pCoordInfo == NULL) continue;

			// [2017:3:8]-[WEZASW] : CameraOffset 범위 변경 (-1~1 => -5~5)
			// [2017:3:8]-[WEZASW] : CameraOffset �� (-1~1 => -5~5)
			double m_dMinOffset = -5.0;
			double m_dMaxOffset = 5.0;

			@@ -5249,7 +5275,7 @@

			if(nHeaderIdx == 0)
			{
			// 이동할 모터좌표 추가
			// �̵�� ǥ �߰�
			if((int)vectorPos.size() < MAX_MOTOR_ADDRESS_SIZE)
			{
			pSReviewResult->dTargetMotorX = dDefectPosX;
			@@ -6517,7 +6543,7 @@
			// add user schedule result


			//공유메모리에 채워줄 리뷰할 갯수와 디펙 좌표를 구조체에 채워주는 장소
			//占쏙옙占쏙옙占쌨모리울옙 채占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙표占쏙옙 占쏙옙占쏙옙체占쏙옙 채占쏙옙占쌍댐옙 占쏙옙占?
			{


			@@ -7232,7 +7258,7 @@
			break;
			}
			break;
			// 미사용
			// 占싱삼옙占?
			case CPJT_PlanMeasure:
			{
			const CRcpMeasureInfo *pRcpMeasureInfo = pRsRcpMeasureInfo->GetRcpMeasureInfo(0);
			@@ -7365,7 +7391,7 @@
			}

			//CIM DV Data
			BOOL CSequenceProcessor_CPJT::SendDVDataToSignalControl() // 수정
			BOOL CSequenceProcessor_CPJT::SendDVDataToSignalControl() // ��
			{
			CGlassResult *pGlassResult = m_pSP2P->ISP2P_GetCurrentGlassResult();
			if (pGlassResult==NULL) return FALSE;
			@@ -7390,7 +7416,7 @@
			}


			int CSequenceProcessor_CPJT::MakeDVData(CGlassResult pGlassResult, char pDVData, int nIndex) // 수정
			int CSequenceProcessor_CPJT::MakeDVData(CGlassResult pGlassResult, char pDVData, int nIndex) // ��
			{
			g_pLog->DisplayMessage(_T("[SequenceProcessor] SendDVDataToSignalControl->MakeDVData IN."));

			@@ -7399,16 +7425,16 @@
			const CRsRcpReviewInfo* pRsRcpReviewInfo = m_pSP2P->ISP2P_Recipe_GetRsRcpReviewInfo();
			if (pRsRcpReviewInfo == NULL) return FALSE;

			// Review 조명 정보
			// Review ��
			const CRcpLightInfo *pReviewLightInfo = pRsRcpReviewInfo->GetRcpLightInfo(nIndex);
			// Review AFM 정보
			// Review AFM ��
			const CRcpAFMRecipeInfo *pReviewAFMInfo = pRsRcpReviewInfo->GetRcpAFMRecipeInfo(nIndex);
			// Review Align Info
			const CAlignResult* pAlignResult = pGlassResult->GetAlignResult();
			// Review Defect Info
			const CReviewResult* pReviewResult = pGlassResult->GetReviewResult(nIndex);

			// Review 배율 정보
			// Review ��
			const CModuleStatus* pModuleStatus = Module_GetModuleStatus(nIndex);
			const SMagnificInfo* pSMagnificInfo = pModuleStatus->GetMagnificInfo(pReviewAFMInfo->GetZoomIndex());
			CSignalControl* pSignalControl = m_pSP2P->ISP2P_GetSignalControl();
			@@ -7430,12 +7456,12 @@
			// Write DVData Packet
			//_DVDataPack_B7_8ver DVDataPack;
			//**Review
			//INLINE : 10개
			//TFE-OFF : 20개
			//Hcut : 50개
			//LAMI : 5개
			//INLINE : 10��
			//TFE-OFF : 20��
			//Hcut : 50��
			//LAMI : 5��
			//**WSI
			//10개 고정
			//10��
			///////////////////////////////////////////////////////////////////////////


			@@ -7482,8 +7508,8 @@
			//nAlignResult = 1;


			//nAlignResult00 = pAlignResult->nFindAlign[0] * 1000;//기준
			//nAlignResult01 = pAlignResult->nFindAlign[1] * 1000;//보조
			//nAlignResult00 = pAlignResult->nFindAlign[0] * 1000;//��
			//nAlignResult01 = pAlignResult->nFindAlign[1] * 1000;//��

			//nAlignResult00 = pAlignResult->dFindScore[0];
			//nAlignResult01 = pAlignResult->dFindScore[1];
			@@ -7501,7 +7527,7 @@
			nAlignResult01 = 0;
			}

			//파워?
			//�Ŀ�?
			nReviewAliveCamera00 = ReviewCamera_GetReviewCameraControl(0)->GetConnected() * 1000;
			nReviewAliveCamera01 = ReviewCamera_GetReviewCameraControl(1)->GetConnected() * 1000;

			@@ -7519,7 +7545,7 @@
			wsprintf(DriveText, TEXT("%C:"), Drive);
			UINT type = GetDriveType(DriveText);
			if ((dwDrive & dwDriveCh) && (type == DRIVE_REMOVABLE \|\| type == DRIVE_FIXED \|\| type == DRIVE_RAMDISK)) {
			// 하드용량
			// 占싹듸옙酉?
			ULARGE_INTEGER i64FreeBytesToCaller = { 0 }, i64TotalBytes = { 0 }, i64FreeBytes = { 0 };
			BOOL bRsult = GetDiskFreeSpaceEx(DriveText, (PULARGE_INTEGER)&i64FreeBytesToCaller, (PULARGE_INTEGER)&i64TotalBytes, (PULARGE_INTEGER)&i64FreeBytes);
			if (bRsult) {
			@@ -7733,7 +7759,7 @@
			pSignalControl->WritePacketData(_T("15100"), sizeof(DVDataPack_CPJT), (short)&DVData);/
			}

			//#3358 KYH FDC 데이터 전송 시점 개선 ADD START
			//#3358 KYH FDC �� ADD START
			void CSequenceProcessor_CPJT::MakeDVData2()
			{

			@@ -7746,9 +7772,9 @@
			}
			else
			{
			// Review 조명 정보
			// Review ��
			pReviewLightInfo = pRsRcpReviewInfo->GetRcpLightInfo(0);
			// Review AFM 정보
			// Review AFM ��
			pReviewAFMInfo = pRsRcpReviewInfo->GetRcpAFMRecipeInfo(0);
			}

			@@ -7772,7 +7798,7 @@



			// Review 배율 정보
			// Review ��
			const CModuleStatus* pModuleStatus = Module_GetModuleStatus(0);
			const SMagnificInfo* pSMagnificInfo = NULL;
			if (pModuleStatus == NULL)
			@@ -7874,8 +7900,8 @@
			//nAlignResult = 1;


			//nAlignResult00 = pAlignResult->nFindAlign[0] * 1000;//기준
			//nAlignResult01 = pAlignResult->nFindAlign[1] * 1000;//보조
			//nAlignResult00 = pAlignResult->nFindAlign[0] * 1000;//��
			//nAlignResult01 = pAlignResult->nFindAlign[1] * 1000;//��

			//nAlignResult00 = pAlignResult->dFindScore[0];
			//nAlignResult01 = pAlignResult->dFindScore[1];
			@@ -7915,7 +7941,7 @@
			nAlignResult01 = 1000;
			}

			//파워?
			//�Ŀ�?
			if (ReviewCamera_GetReviewCameraControl(0) != NULL)
			{
			nReviewAliveCamera00 = ReviewCamera_GetReviewCameraControl(0)->GetConnected() * 1000;
			@@ -7948,7 +7974,7 @@
			wsprintf(DriveText, TEXT("%C:"), Drive);
			UINT type = GetDriveType(DriveText);
			if ((dwDrive & dwDriveCh) && (type == DRIVE_REMOVABLE \|\| type == DRIVE_FIXED \|\| type == DRIVE_RAMDISK)) {
			// 하드용량
			// 占싹듸옙酉?
			ULARGE_INTEGER i64FreeBytesToCaller = { 0 }, i64TotalBytes = { 0 }, i64FreeBytes = { 0 };
			BOOL bRsult = GetDiskFreeSpaceEx(DriveText, (PULARGE_INTEGER)&i64FreeBytesToCaller, (PULARGE_INTEGER)&i64TotalBytes, (PULARGE_INTEGER)&i64FreeBytes);
			if (bRsult) {
			@@ -7995,7 +8021,7 @@

			return;
			}
			//#3358 KYH FDC 데이터 전송 시점 개선 ADD END
			//#3358 KYH FDC �� ADD END

			DWORD CSequenceProcessor_CPJT::GetDiskUsage()
			{
			@@ -8033,7 +8059,7 @@

			BOOL bResult = FALSE;

			// PCControl D2300 (검사 영역)
			// PCControl D2300 (�˻� ��)
			switch(nSignalIndex)
			{
			case PCControlRecv_TimeChange:
			@@ -8099,7 +8125,7 @@
			g_pLog->DisplayMessage(_T("[SequenceProcessor] Success! SetLocalTime(), Current: %04d-%02d-%02d %02d-%02d-%02d, Changed: %04d-%02d-%02d %02d-%02d-%02d"),
			CurrentTime.wYear, CurrentTime.wMonth, CurrentTime.wDay, CurrentTime.wHour, CurrentTime.wMinute, CurrentTime.wSecond,
			ChangedTime.wYear, ChangedTime.wMonth, ChangedTime.wDay, ChangedTime.wHour, ChangedTime.wMinute, ChangedTime.wSecond);
			// AFM & WSI TIME 동기화
			// AFM & WSI TIME ��ȭ
			SendSystemTime(ChangedTime);
			} else {
			g_pLog->DisplayMessage(_T("[SequenceProcessor] Fail! SetLocalTime()"));
			@@ -8126,7 +8152,7 @@
			return TRUE;
			}

			// Local System 변경 시간과 변경 요청 컨트롤러의 시간차 처리 생각
			// Local System �� ð�� û ��Ʈ�ѷ�� ð�� ó��
			BOOL CSequenceProcessor_CPJT::SendSystemTime(SYSTEMTIME sysTime)
			{
			SYSTEMTIME CurrentTime;
			@@ -8273,7 +8299,7 @@
			case PCControlSend_Defoucs:
			m_pSP2P->ISP2P_DisplayMessage(_T("[PCControl_Send] Defoucs! => %d"),0);
			break;
			case PCControlSend_Diagnosis: // 0412 자가진단 신호 추가
			case PCControlSend_Diagnosis: // 0412 �ڰ�� ȣ �߰�
			m_pSP2P->ISP2P_DisplayMessage(_T("[PCControl_Send] Diagnosis! => %d"), 0);
			break;
			}
			@@ -8384,7 +8410,7 @@
			case PCControlSend_Defoucs:
			m_pSP2P->ISP2P_DisplayMessage(_T("[PCControl_Send] Defoucs! => %d"),0);
			break;
			case PCControlSend_Diagnosis: // 0412 자가진단 신호 추가
			case PCControlSend_Diagnosis: // 0412 �ڰ�� ȣ �߰�
			m_pSP2P->ISP2P_DisplayMessage(_T("[PCControl_Send] Diagnosis! => %d"), 0);
			break;
			}
			@@ -8498,7 +8524,7 @@
			if (bResult==FALSE) m_pSP2P->ISP2P_DisplayMessage(_T("[PCControl_Mode] Manual Mode Error!"));

			// lmk simul manual camera,motor stop
			//ReviewCamera_CameraControl(CameraControlStop); // 모터 멈추면 카메라 자동 스탑
			//ReviewCamera_CameraControl(CameraControlStop); // �� ߸� ī�޶� �ڵ� ��ž
			CMotorControl* pMotorControl = m_pSP2P->ISP2P_GetMotorControl();
			if(pMotorControl)
			pMotorControl->CommonSetAutoStop();
			@@ -8669,10 +8695,10 @@

			if (SetLocalTime(&sTime))
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[PCControl_Signal] 시간동기화성공 %s"), strtime);
			m_pSP2P->ISP2P_DisplayMessage(_T("[PCControl_Signal] �ð��ȭ�� %s"), strtime);
			}
			else
			m_pSP2P->ISP2P_DisplayMessage(_T("[PCControl_Signal] 시간동기화실패 %s"), strtime);
			m_pSP2P->ISP2P_DisplayMessage(_T("[PCControl_Signal] �ð��ȭ�� %s"), strtime);


			//memcpy(&time, strTime, 2);
			@@ -8893,7 +8919,7 @@
			CReviewResult* pWsiMultiShotResult = pGlassResult->GetWsiMultiShotResult(nModuleIndex);
			if (pWsiMultiShotResult == NULL) goto RESULT_FAIL;

			// 마지막 인덱스를 가져온다.
			// �� ε�� ´�.
			int nCurResultIdx = pWsiMultiShotResult->GetLastSReviewResultIndex() + 1; // last index + 1
			int nStartResultIdx = pWsiMultiShotResult->GetStartSReviewResultIndex();
			int nEndResultIdx = pWsiMultiShotResult->GetEndSReviewResultIndex();
			@@ -8907,13 +8933,13 @@
			int nMPosY = int(pPosition->dMotorPosY * 1000.0);
			double dTime = (double)m_ProcessTimer.GetDurationMilliSecond();

			// 인덱스가 다르면 비정상임.
			// �ε�� ٸ�� .
			if (measureResut.nResultIndex != nCurResultIdx)
			{
			goto RESULT_FAIL;
			}

			// 현재 데이터 저장.
			// �� .
			// measureResut

			if (pWsiMultiShotResult->GetSReviewResultCount() == 0) return;
			@@ -8938,7 +8964,7 @@
			// set last result idx
			pWsiMultiShotResult->SetLastSReviewResultIndex(nCurResultIdx);

			// 마지막 포인트까지 왔고, WSI 결과가 남아 있으면...
			// 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙트占쏙옙占쏙옙 占쌉곤옙, WSI 占쏙옙占쏙옙占?占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙...
			if (nCurResultIdx == nEndResultIdx && nCurResultIdx <= pWsiMultiShotResult->GetSReviewResultCount())
			{
			nStartResultIdx = nCurResultIdx + 1;
			@@ -8949,8 +8975,8 @@
			pWsiMultiShotResult->SetStartSReviewResultIndex(nStartResultIdx);
			pWsiMultiShotResult->SetEndSReviewResultIndex(nEndResultIdx);

			// 나머지 포인트 리뷰 수행하자.
			::Sleep(3000); // 딜레이는 필수임. 없으면 동작 안함.
			// �� Ʈ �� .
			::Sleep(3000); // 占쏙옙占쏙옙甄占?占십쇽옙占쏙옙. 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙.
			// Process_RemainWsiPoint(nModuleIndex);
			}

			@@ -9016,7 +9042,7 @@
			if(pGlassResult && pReviewProcessor)
			{
			// WsiStart
			pReviewProcessor->SetJobID(pGlassResult->m_strJobID); // pGlassResult->m_strGlassID -> pGlassResult->m_strJobID 변경
			pReviewProcessor->SetJobID(pGlassResult->m_strJobID); // pGlassResult->m_strGlassID -> pGlassResult->m_strJobID ��
			pReviewProcessor->SetOperID(pGlassResult->m_strOperID);
			m_pSP2P->ISP2P_UpdateReviewProcessStatus(ReviewProcessStatus_WSIReflowStart, nPlanIndex);

			@@ -9052,7 +9078,7 @@
			if(pGlassResult && pReviewProcessor)
			{
			// WsiStart
			pReviewProcessor->SetJobID(pGlassResult->m_strJobID); // pGlassResult->m_strGlassID -> pGlassResult->m_strJobID 변경
			pReviewProcessor->SetJobID(pGlassResult->m_strJobID); // pGlassResult->m_strGlassID -> pGlassResult->m_strJobID ��
			pReviewProcessor->SetOperID(pGlassResult->m_strOperID);
			m_pSP2P->ISP2P_UpdateReviewProcessStatus(ReviewProcessStatus_WSIStart, nPlanIndex);

			@@ -9079,7 +9105,7 @@
			WSIAllReadySignal(1);

			// send wsi start
			// 수정 사항
			// ��
			if (!WSIMultiShotAllStartSignal())
			{
			g_pLog->DisplayMessage(_T("[WSI] WSI MultiShot Start Fail!!"));
			@@ -9090,7 +9116,7 @@
			if (pGlassResult && pReviewProcessor)
			{
			// WsiStart
			pReviewProcessor->SetJobID(pGlassResult->m_strJobID); // pGlassResult->m_strGlassID -> pGlassResult->m_strJobID 변경
			pReviewProcessor->SetJobID(pGlassResult->m_strJobID); // pGlassResult->m_strGlassID -> pGlassResult->m_strJobID ��
			pReviewProcessor->SetOperID(pGlassResult->m_strOperID);
			m_pSP2P->ISP2P_UpdateReviewProcessStatus(ReviewProcessStatus_WSIMultiShotStart, nPlanIndex);

			@@ -9153,7 +9179,7 @@
			int nEndIdx = pWsiResult->GetEndSReviewResultIndex();
			nEndIdx = min(nEndIdx, (pWsiResult->GetSReviewResultCount()-1)) + 1; // set End Index

			// [2017:3:8]-[WEZASW] : CameraOffset 범위 변경 (-1~1 => -5~5)
			// [2017:3:8]-[WEZASW] : CameraOffset �� (-1~1 => -5~5)
			double m_dMinOffset = -5.0;
			double m_dMaxOffset = 5.0;

			@@ -9283,7 +9309,7 @@
			CModuleStatus* pModuleStatus = Module_GetModuleStatus(nModuleIdx);
			if (pModuleStatus == NULL) continue;

			//충돌거리 넣기
			//�浹�Ÿ� �ֱ�
			{
			double dCollisionPosX = pWsiUserResult->GetCollisionPositionX() / 1000.0;
			double dCollisionPosY = 0.0;
			@@ -9326,7 +9352,7 @@
			int nEndIdx = pWsiUserResult->GetEndSReviewResultIndex();
			nEndIdx = min(nEndIdx, (pWsiUserResult->GetSReviewResultCount()-1)) + 1; // set End Index

			// [2017:3:8]-[WEZASW] : CameraOffset 범위 변경 (-1~1 => -5~5)
			// [2017:3:8]-[WEZASW] : CameraOffset �� (-1~1 => -5~5)
			double m_dMinOffset = -5.0;
			double m_dMaxOffset = 5.0;

			@@ -9430,16 +9456,16 @@

			}

			//기존꺼 삭제
			//��
			pWsiMultiShotResult->GetVectorSReviewResult()->clear();
			int nResultCount = 0;
			if (m_vecSReviewResult.size()>0)
			{
			//스케줄링 순서 대로 집어넣은거라 걍 집어넣기 ㄱㄱ
			//占쏙옙占쏙옙占쌕몌옙 占쏙옙占쏙옙 占쏙옙占?占쏙옙占쏙옙占쏙옙占쏙옙킷占?占쏙옙 占쏙옙占쏙옙殮占?占쏙옙占쏙옙
			for(int i=0; i< m_vecSReviewResult.size(); i++)
			{
			//원래는 세팅에 분할 갯수 입력해야됨 그것만큼 돌리기!
			//지금은 WSI FOV 4분할 기준에서 ㄱㄱ
			//�� ÿ� �� Է��ؾߵ� �װ͸�ŭ ��!
			//�� WSI FOV 4�� ؿ��
			double dOringinX = m_vecSReviewResult[i].nUMOriginX;
			double dOringinY = m_vecSReviewResult[i].nUMOriginY;

			@@ -9709,7 +9735,7 @@
			if (pModuleStatus == NULL) continue;


			//충돌거리 넣기
			//�浹�Ÿ� �ֱ�
			{

			double dCollisionPosX = pWsiMultiShotResult->GetCollisionPositionX() / 1000.0;
			@@ -9737,7 +9763,7 @@
			int nEndIdx = pWsiMultiShotResult->GetEndSReviewResultIndex();
			nEndIdx = min(nEndIdx, (pWsiMultiShotResult->GetSReviewResultCount() - 1)) + 1; // set End Index

			// [2017:3:8]-[WEZASW] : CameraOffset 범위 변경 (-1~1 => -5~5)
			// [2017:3:8]-[WEZASW] : CameraOffset �� (-1~1 => -5~5)
			double m_dMinOffset = -5.0;
			double m_dMaxOffset = 5.0;

			@@ -10178,7 +10204,7 @@
			CRsRcpReviewInfo* pRsRcpReviewInfo = m_pSP2P->ISP2P_Recipe_GetRsRcpReviewInfo();
			if(pRsRcpReviewInfo == NULL) return FALSE;

			if(pRsRcpReviewInfo->GetRcpUserDefectInfoCount() < 1) return TRUE; // 고정리뷰 카운트가 없다면 넘어가자
			if(pRsRcpReviewInfo->GetRcpUserDefectInfoCount() < 1) return TRUE; // �� ī��Ʈ�� ٸ� �Ѿ��

			double dCenterPosX, dCenterPosY;

			@@ -10237,18 +10263,18 @@
			_grmGlassData* pSharedGlassData = pDitSharedGlassRaw->GetGlassData();
			if(pSharedGlassData == NULL) return FALSE;

			//pSharedGlassData->m_nUserReviewNum = 0; //공유 메모리 User plan
			//pSharedGlassData->m_nUserReviewNum = 0; //�� ޸� User plan

			_grmDefectData* pSharedDefect;
			int nPointCount = pRecipeinfo->GetRcpUserDefectInfoCount(); // User 좌표 총 카운트
			int nPointCount = pRecipeinfo->GetRcpUserDefectInfoCount(); // User ��ǥ �� ī��Ʈ

			int nSharedDefectNum = pSharedGlassData->m_nDefectNum; // 디펙 총개수 User Idx 의 첫번째 Index 가 된다
			int nStartIdx=nSharedDefectNum;// USER 디펙 종류 IDX 부여하기 위한 시작점
			int nSharedDefectNum = pSharedGlassData->m_nDefectNum; // �� Ѱ�� User Idx �� ù��° Index �� ȴ�
			int nStartIdx=nSharedDefectNum;// USER �� IDX �ο��ϱ� ��

			CRcpPlanInfo* pRcpPlanInfo; // 레시피 정보
			CRcpUserDefectInfo *pDefectInfo;// 레시피 defect 정보
			CRcpPlanInfo* pRcpPlanInfo; // ��
			CRcpUserDefectInfo *pDefectInfo;// �� defect ��

			int nInsepectionType;// User 타입 Reviewreflow = 0 wsiReflow =1; REV&WSI =2; WSIUSEr =3; USER =4;
			int nInsepectionType;// User Ÿ�� Reviewreflow = 0 wsiReflow =1; REV&WSI =2; WSIUSEr =3; USER =4;

			int nCount = 0;

			@@ -10312,7 +10338,7 @@

			BOOL CSequenceProcessor_CPJT::CompareRevType(int nInsType,int nRevType)
			{
			//Plan 타입과 InspectionMode 비교
			//Plan Ÿ�԰� InspectionMode ��
			if(nRevType == CPJT_PlanUser)
			{
			if(nInsType == USER) return TRUE;
			@@ -10370,7 +10396,7 @@
			CString strMessage, strResultFilePath, strUploadResultFilePath, strLocalRawPath;
			CString strUploadRawPath, strUploadImagePath, strAOIRawFileName, strAOIRawFilePath;

			//3-1. 리뷰 결과 파일 쓰기
			//3-1. 占쏙옙占쏙옙 占쏙옙占?占쏙옙占쏙옙 占쏙옙占쏙옙
			m_pSP2P->ISP2P_SetReviewResultData(pGlassResult);

			strLocalRawPath = pNetworkInfo->m_strLocalRawPath;
			@@ -10397,7 +10423,7 @@

			if(strUploadRawPath.IsEmpty() == FALSE && strAOIRawFilePath.IsEmpty() == FALSE)
			{
			// [2017:5:16]-[WEZASW] : 리뷰 PASS시의 설비 운영의 상황에 따라 AOI Server가 RAW 파일 직접 업로드 진행.
			// [2017:5:16]-[WEZASW] : �� PASS�� �� Ȳ�� AOI Server�� RAW �� ε� ��.
			strUploadResultFilePath.Format(_T("%s\\%s"), strUploadRawPath, strAOIRawFileName);

			if(CopyFile(strResultFilePath, strUploadResultFilePath, FALSE))
			@@ -10418,9 +10444,9 @@
			}

			// delete file of Glass direction
			DeleteFile(pNetworkInfo->m_strAOIRawPath + _T("\\") + pGlassResult->m_strJobID + _T("TD"));//pGlassResult->m_strGlassID -> m_StrJobID 변경
			DeleteFile(pNetworkInfo->m_strAOIRawPath + _T("\\") + pGlassResult->m_strJobID + _T("TD"));//pGlassResult->m_strGlassID -> m_StrJobID ��

			// [2017:4:11]-[WEZASW] :CIM(DV Data) 보고 항목 추가.
			// [2017:4:11]-[WEZASW] :CIM(DV Data) �� ׸� �߰�.
			if (SendDVDataToSignalControl()==FALSE)
			{
			m_pSP2P->ISP2P_DisplayMessage(_T("[SequenceProcessor::ReviewEnd] DV Data Send FAIL!"));
			@@ -10440,8 +10466,8 @@

			BOOL CSequenceProcessor_CPJT::MoveReviewStartMotorPosition(CGlassResult* pGlassResult,int nReviewType)
			{
			//혹시나 쓰일까봐 남겨듐
			//다음 플랜의 첫번째 위치로 이동
			//혹占시놂옙 占쏙옙占싹깍옙占?占쏙옙占쌤듸옙
			//�� ÷�� ù��° ��ġ�� ̵�

			double dDefectPosX,dDefectPosY = 0;

			@@ -10505,7 +10531,7 @@

			void CSequenceProcessor_CPJT::SendWsiErrorAlarm_CPJT(int Index) //190801 chm
			{
			//wsi 에러 알람
			//wsi �� ˶�
			if(Index==1)
			{
			g_pLog->DisplayMessage(_T("[SequenceProcessor_CPJT] WSI Alive Error!!!"));
			@@ -10519,7 +10545,7 @@

			void CSequenceProcessor_CPJT::SendWsiAlive_CPJT()//190801 chm
			{
			//WSI Alive 신호 받음
			//WSI Alive ��ȣ ��
			SetWSIAliveCheck(TRUE);
			}

			@@ -10545,7 +10571,7 @@
			if(bWsiAliveCheck ==FALSE){
			m_pCSPC->SendWsiErrorAlarm_CPJT(1);
			}
			bWsiAliveCheck=FALSE; //30초에 한번씩 0으로 초기화
			bWsiAliveCheck=FALSE; //30�ʿ� �ѹ�� 0�� ʱ�ȭ

			}
			}