SDC/A5_QD_CF_REVIEW.git

			@@ -88,7 +88,7 @@
			int nEndResultIdx = pReviewResult->GetEndSReviewResultIndex();


			// 인덱스가 현재 마지막 인덱스 보다 클시..
			// �ε�� ε�� Ŭ��..
			if (nCurResultIdx > nEndResultIdx)
			{
			LeaveCriticalSection(&m_csUserCriticalSection);
			@@ -97,7 +97,7 @@
			}


			// 현재 결과데이터 저장
			// 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙占쏙옙占?占쏙옙占쏙옙

			wsiResult.nWsi_ResultIndex = measureResut.nResultIndex;
			wsiResult.nResultCode = measureResut.nResultCode;
			@@ -138,8 +138,8 @@
			// g_pLog->DisplayMessage(_T("[ReviewProcessor]JugementR [%d] JugementG [%d] JugementB [%d]"), wsiResult.nJugementR, wsiResult.nJugementG, wsiResult.nJugementB);
			// g_pLog->DisplayMessage(_T("[ReviewProcessor]RZoneHeight [%.03lf] GZoneHeight [%.03lf] BZoneHeight [%.03lf]"), wsiResult.dRZoneHeight, wsiResult.dGZoneHeight, wsiResult.dBZoneHeight);

			// wsiResult.추가 하세요= measureResut.nMultiShot;
			// wsiResult.추가 하세요= measureResut.nCurrentShotNumber;
			// wsiResult.�߰� �ϼ��= measureResut.nMultiShot;
			// wsiResult.�߰� �ϼ��= measureResut.nCurrentShotNumber;
			break;
			case 3: //BANK
			wsiResult.dRZoneHeight = measureResut.dRZoneHeight;
			@@ -147,14 +147,14 @@
			wsiResult.dBZoneHeight = measureResut.dBZoneHeight;
			wsiResult.dDefectHeight = measureResut.dDefectHeight;
			wsiResult.nWsi_DefectType = measureResut.nDefectType;
			// wsiResult.추가 하세요= measureResut.nMultiShot;
			// wsiResult.추가 하세요= measureResut.nCurrentShotNumber;
			// wsiResult.�߰� �ϼ��= measureResut.nMultiShot;
			// wsiResult.�߰� �ϼ��= measureResut.nCurrentShotNumber;
			break;
			case 4: //CS
			wsiResult.dCSHeight = measureResut.dCSHeight;
			wsiResult.dDefectHeight = measureResut.dDefectHeight;
			wsiResult.nWsi_DefectType = measureResut.nDefectType;
			// wsiResult.추가 하세요= measureResut.nMultiShot;
			// wsiResult.�߰� �ϼ��= measureResut.nMultiShot;
			break;
			}

			@@ -163,7 +163,7 @@
			memcpy(wsiResult.pWsi_ResultData, measureResut.pResultData, sizeof(wsiResult.pWsi_ResultData));


			// 결과 데이터 추가
			// 占쏙옙占?占쏙옙占쏙옙占쏙옙 占쌩곤옙
			SReviewResult *pProcessResult = NULL;
			if (pGlassResult->SetWsiResultData(nModuleIndex, nCurResultIdx, wsiResult, nGlassPosX, nGlassPosY, nMotorPosX, nMotorPosY, dTime))
			{
			@@ -173,10 +173,10 @@
			pProcessResult = pReviewResult->GetSReviewResult(nCurResultIdx);
			}

			// 저장 성공시, 리뷰 프로세서에 포인터 전달
			// �� , �� μ��
			if (pProcessResult)
			{
			// 처리 쓰레드 수행
			// ó��
			if (AddReviewProcessData(pProcessResult)==1)
			{
			g_pLog->DisplayMessage(_T("[ReviewProcessor]Add Process Data module[%d] result[%d]"), nModuleIndex, nCurResultIdx);
			@@ -192,7 +192,7 @@

			LeaveCriticalSection(&m_csUserCriticalSection);

			// 결과 갱신.
			// 占쏙옙占?占쏙옙占쏙옙.
			m_pRP2P->IRP2P_UpdateReviewResult(nModuleIndex, pGlassResult);
			return;

			@@ -238,7 +238,7 @@
			int nEndResultIdx = pReviewResult->GetEndSReviewResultIndex();


			// 인덱스가 현재 마지막 인덱스 보다 클시..
			// �ε�� ε�� Ŭ��..
			if (nCurResultIdx > nEndResultIdx)
			{
			LeaveCriticalSection(&m_csUserCriticalSection);
			@@ -246,14 +246,14 @@
			g_pLog->DisplayMessage(_T("[ReviewProcessor]SetWsiResultData module[%d] point[%d] result[%d]"), nModuleIndex, measureResut.nResultIndex, nCurResultIdx);
			}

			// 현재 결과데이터 저장
			// 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙占쏙옙占?占쏙옙占쏙옙
			wsiUserResult.nWsi_ResultCode = measureResut.nResultCode;
			wsiUserResult.nWsi_Type = measureResut.nResultType;
			wsiUserResult.nWsi_SlopeWarn = measureResut.nXSlopeWarn;
			memcpy(wsiUserResult.pWsi_ResultData, measureResut.pResultData, sizeof(wsiUserResult.pWsi_ResultData));


			// 결과 데이터 추가
			// 占쏙옙占?占쏙옙占쏙옙占쏙옙 占쌩곤옙
			SReviewResult *pProcessResult = NULL;
			if (pGlassResult->SetUserWsiResultData(nModuleIndex, nCurResultIdx, wsiUserResult, nGlassPosX, nGlassPosY, nMotorPosX, nMotorPosY, dTime))
			{
			@@ -263,10 +263,10 @@
			pProcessResult = pReviewResult->GetSReviewResult(nCurResultIdx);
			}

			// 저장 성공시, 리뷰 프로세서에 포인터 전달
			// �� , �� μ��
			if (pProcessResult)
			{
			// 처리 쓰레드 수행
			// ó��
			if (AddReviewProcessData(pProcessResult)==1)
			{
			g_pLog->DisplayMessage(_T("[ReviewProcessor]Add Process Data module[%d] result[%d]"), nModuleIndex, nCurResultIdx);
			@@ -282,7 +282,7 @@

			LeaveCriticalSection(&m_csUserCriticalSection);

			// 결과 갱신.
			// 占쏙옙占?占쏙옙占쏙옙.
			m_pRP2P->IRP2P_UpdateReviewResult(nModuleIndex, pGlassResult);
			return;

			@@ -337,7 +337,7 @@
			int nEndResultIdx = pReviewResult->GetEndSReviewResultIndex();


			// 인덱스가 현재 마지막 인덱스 보다 클시..
			// �ε�� ε�� Ŭ��..
			if (nCurResultIdx > nEndResultIdx)
			{
			LeaveCriticalSection(&m_csUserCriticalSection);
			@@ -345,7 +345,7 @@
			g_pLog->DisplayMessage(_T("[ReviewProcessor]SetWsiMultiShotResultData module[%d] point[%d] result[%d]"), nModuleIndex, measureResut.nResultIndex, nCurResultIdx);
			}

			// 현재 결과데이터 저장
			// 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙占쏙옙占?占쏙옙占쏙옙
			wsiResult.nWsi_ResultCode = measureResut.nResultCode;
			wsiResult.nWsi_Type = measureResut.nResultType;
			wsiResult.nWsi_SlopeWarn = measureResut.nXSlopeWarn;
			@@ -353,7 +353,7 @@
			memcpy(wsiResult.pWsi_ResultData, measureResut.pResultData, sizeof(wsiResult.pWsi_ResultData));


			// 결과 데이터 추가
			// 占쏙옙占?占쏙옙占쏙옙占쏙옙 占쌩곤옙
			SReviewResult *pProcessResult = NULL;
			if (pGlassResult->SetWsiResultData(nModuleIndex, nCurResultIdx, wsiResult, nGlassPosX, nGlassPosY, nMotorPosX, nMotorPosY, dTime))
			{
			@@ -363,10 +363,10 @@
			pProcessResult = pReviewResult->GetSReviewResult(nCurResultIdx);
			}

			// 저장 성공시, 리뷰 프로세서에 포인터 전달
			// �� , �� μ��
			if (pProcessResult)
			{
			// 처리 쓰레드 수행
			// ó��
			if (AddReviewProcessData(pProcessResult) == 1)
			{
			g_pLog->DisplayMessage(_T("[ReviewProcessor]Add Process Data module[%d] result[%d]"), nModuleIndex, nCurResultIdx);
			@@ -382,7 +382,7 @@

			LeaveCriticalSection(&m_csUserCriticalSection);

			// 결과 갱신.
			// 占쏙옙占?占쏙옙占쏙옙.
			m_pRP2P->IRP2P_UpdateReviewResult(nModuleIndex, pGlassResult);
			return;

			@@ -457,7 +457,7 @@
			int nStartResultIdx = pReviewResult->GetStartSReviewResultIndex();
			int nEndResultIdx = pReviewResult->GetEndSReviewResultIndex();

			// 인덱스가 현재 마지막 인덱스 보다 클시..
			// �ε�� ε�� Ŭ��..
			if (nCurResultIdx > nEndResultIdx)
			{
			LeaveCriticalSection(&m_csUserCriticalSection);
			@@ -465,7 +465,7 @@
			g_pLog->DisplayMessage(_T("[ReviewProcessor]SetReviewResultData module[%d] point[%d] result[%d]"), nModuleIndex, nResultIndex, nCurResultIdx);
			}

			// 현재 결과이미지 저장
			// 占쏙옙占쏙옙 占쏙옙占쏙옙譴占쏙옙占?占쏙옙占쏙옙
			SReviewResult *pProcessResult = NULL;
			switch(GetReviewProcessStatus())
			{
			@@ -509,10 +509,10 @@
			break;
			}

			// 저장 성공시, 리뷰 프로세서에 포인터 전달
			// �� , �� μ��
			if (pProcessResult)
			{
			// 처리 쓰레드 수행
			// ó��
			if (AddReviewProcessData(pProcessResult)==1)
			{
			g_pLog->DisplayMessage(_T("[ReviewProcessor]Add Process Data module[%d] result[%d]"), nModuleIndex, nCurResultIdx);
			@@ -527,8 +527,8 @@
			}
			LeaveCriticalSection(&m_csUserCriticalSection);

			//만약 어느 한쪽이포인트 진행을 다해버리면 아래 구문을 안타서 다시 모터좌표 안쏴줌
			// 신호처리 필요함 이거 ㄱㄱ
			//占쏙옙占쏙옙 占쏙옙占?占쏙옙占쏙옙占쏙옙占쏙옙占쏙옙트 占쏙옙占쏙옙占쏙옙 占쏙옙占쌔뱄옙占쏙옙占쏙옙 占싣뤄옙 占쏙옙占쏙옙占쏙옙 占쏙옙타占쏙옙 占쌕쏙옙 占쏙옙占쏙옙占쏙옙표 占싫쏙옙占쏙옙
			// ��ȣó�� ʿ�� ̰� ��
			if (nCurResultIdx + 1== pReviewResult->GetSReviewResultCount())
			{
			if (nModuleIndex == 0)
			@@ -542,7 +542,7 @@

			if (bLeftGantryReviewDone&&bRightGantryReviewDone)
			{
			::Sleep(3000); // 딜레이는 필수임. 없으면 동작 안함.
			::Sleep(3000); // 占쏙옙占쏙옙甄占?占십쇽옙占쏙옙. 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙.
			g_pLog->DisplayMessage(_T("[ReviewProcessor]RemainReview Started module[%d]"), nModuleIndex);
			CSequenceProcessor* pSequenceProcessor = m_pRP2P->IRP2P_GetSequenceProcessor();
			switch (GetReviewProcessStatus())
			@@ -567,13 +567,13 @@
			}
			else if(m_pRP2P->IRP2P_Recipe_GetRsRcpReviewInfo()->GetRcpSchedulingInfo()->GetSingleGantryPath()>0)
			{
			//20210302 싱글 겐트리 사용시 모터 로직상 두개의 겐트리가 완료된 상태에서
			//시작을 해야됨으로 Review 에서 Count 체크 하는 기능으로 한겐트리 사용시 200개에서 멈추는 현상 발생
			//그래서 싱글 겐트리 사용시 예외처리 하여 동작하도록 바꿔야됨 CHM
			//20210302 占싱깍옙 占쏙옙트占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙 占싸곤옙占쏙옙 占쏙옙트占쏙옙占쏙옙 占싹뤄옙占?占쏙옙占승울옙占쏙옙
			//占쏙옙占쏙옙占쏙옙 占쌔야듸옙占쏙옙占쏙옙 Review 占쏙옙占쏙옙 Count 체크 占싹댐옙 占쏙옙占쏙옙占쏙옙占?占싼곤옙트占쏙옙 占쏙옙占쏙옙 200占쏙옙占쏙옙占쏙옙 占쏙옙占쌩댐옙 占쏙옙占쏙옙 占쌩삼옙
			//占쌓뤄옙占쏙옙 占싱깍옙 占쏙옙트占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙처占쏙옙 占싹울옙 占쏙옙占쏙옙占싹듸옙占쏙옙 占쌕뀐옙森占?CHM
			g_pLog->DisplayMessage(_T("[ReviewProcessor]Single GantryPath Use"), nModuleIndex);
			if (bLeftGantryReviewDone \|\| bRightGantryReviewDone)
			{
			::Sleep(3000); // 딜레이는 필수임. 없으면 동작 안함.
			::Sleep(3000); // 占쏙옙占쏙옙甄占?占십쇽옙占쏙옙. 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙.
			g_pLog->DisplayMessage(_T("[ReviewProcessor]RemainReview Started module[%d]"), nModuleIndex);
			CSequenceProcessor* pSequenceProcessor = m_pRP2P->IRP2P_GetSequenceProcessor();
			switch (GetReviewProcessStatus())
			@@ -601,7 +601,7 @@

			}

			// 마지막 포인트까지 왔고, 리뷰할 결과가 남아 있으면...
			// 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙트占쏙옙占쏙옙 占쌉곤옙, 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙占?占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙...
			if(nCurResultIdx==nEndResultIdx && nCurResultIdx+1 < pReviewResult->GetSReviewResultCount())
			{

			@@ -624,8 +624,8 @@
			pReviewResult->SetStartSReviewResultIndex(nStartResultIdx);
			pReviewResult->SetEndSReviewResultIndex(nEndResultIdx);

			// 나머지 포인트 리뷰 수행하자.
			::Sleep(3000); // 딜레이는 필수임. 없으면 동작 안함.
			// �� Ʈ �� .
			::Sleep(3000); // 占쏙옙占쏙옙甄占?占십쇽옙占쏙옙. 占쏙옙占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙.
			if (bLeftGantryReviewDone&&bRightGantryReviewDone)
			{

			@@ -685,7 +685,7 @@
			}
			}

			// 결과 갱신.
			// 占쏙옙占?占쏙옙占쏙옙.
			m_pRP2P->IRP2P_UpdateReviewResult(nModuleIndex, pGlassResult, m_nReviewPlanIndex);
			return;

			@@ -729,7 +729,7 @@
			{
			if (m_pRP2P==NULL) return 0;

			// 마지막 포인트인지 확인 후 PCControl ReviewEnd 전송
			// �� Ʈ�� Ȯ�� PCControl ReviewEnd ��
			CGlassResult *pGlassResult = m_pRP2P->IRP2P_GetCurrentGlassResult();
			CSequenceProcessor* pSequenceProcessor = m_pRP2P->IRP2P_GetSequenceProcessor();
			if (pGlassResult==NULL \|\| pSequenceProcessor==NULL)
			@@ -737,7 +737,7 @@
			return 1;
			}

			// 조건확인
			// ��Ȯ��
			if (pGlassResult->CheckReviewComplete())
			{
			// check motor ready!
			@@ -763,7 +763,7 @@
			{
			if (m_pRP2P==NULL) return 0;

			// 마지막 포인트인지 확인 후 PCControl ReviewEnd 전송
			// �� Ʈ�� Ȯ�� PCControl ReviewEnd ��
			CGlassResult *pGlassResult = m_pRP2P->IRP2P_GetCurrentGlassResult();
			CSequenceProcessor* pSequenceProcessor = m_pRP2P->IRP2P_GetSequenceProcessor();
			if (pGlassResult==NULL \|\| pSequenceProcessor==NULL)
			@@ -771,7 +771,7 @@
			return 1;
			}

			// 조건확인
			// ��Ȯ��
			if (pGlassResult->CheckUserComplete())
			{
			m_pRP2P->IRP2P_DisplayMessage(_T("User Last Point Complete! "));
			@@ -796,7 +796,7 @@
			{
			if (m_pRP2P==NULL) return 0;

			// 마지막 포인트인지 확인 후 PLC ReviewEnd 전송
			// �� Ʈ�� Ȯ�� PLC ReviewEnd ��
			CGlassResult *pGlassResult = m_pRP2P->IRP2P_GetCurrentGlassResult();
			CSequenceProcessor* pSequenceProcessor = m_pRP2P->IRP2P_GetSequenceProcessor();
			if (pGlassResult==NULL \|\| pSequenceProcessor==NULL)
			@@ -804,7 +804,7 @@
			return 1;
			}

			// 조건확인
			// ��Ȯ��
			if (pGlassResult->CheckReflowComplete())
			{
			m_pRP2P->IRP2P_DisplayMessage(_T("Reflow Last Point Complete! "));
			@@ -829,7 +829,7 @@
			{
			if (m_pRP2P==NULL) return 0;

			// 마지막 포인트인지 확인 후 PCControl ReviewEnd 전송
			// �� Ʈ�� Ȯ�� PCControl ReviewEnd ��
			CGlassResult *pGlassResult = m_pRP2P->IRP2P_GetCurrentGlassResult();
			CSequenceProcessor* pSequenceProcessor = m_pRP2P->IRP2P_GetSequenceProcessor();
			if (pGlassResult==NULL \|\| pSequenceProcessor==NULL)
			@@ -837,7 +837,7 @@
			return 1;
			}

			// 조건확인
			// ��Ȯ��
			if (pGlassResult->CheckWsiComplete())
			{
			m_pRP2P->IRP2P_DisplayMessage(_T("Wsi Last Point Complete! "));
			@@ -863,7 +863,7 @@
			g_pLog->DisplayMessage(_T("PostProcessMeasureResult[%d]"),nThreadIdx);
			if (m_pRP2P==NULL) return 0;

			// 마지막 포인트인지 확인 후 PCControl ReviewEnd 전송
			// �� Ʈ�� Ȯ�� PCControl ReviewEnd ��
			CGlassResult *pGlassResult = m_pRP2P->IRP2P_GetCurrentGlassResult();
			CSequenceProcessor* pSequenceProcessor = m_pRP2P->IRP2P_GetSequenceProcessor();
			if (pGlassResult==NULL \|\| pSequenceProcessor==NULL)
			@@ -871,7 +871,7 @@
			return 1;
			}

			// 조건확인
			// ��Ȯ��
			if (pGlassResult->CheckMeasureComplete())
			{
			m_pRP2P->IRP2P_DisplayMessage(_T("Measure Last Point Complete! "));
			@@ -900,7 +900,7 @@
			{
			if (m_pRP2P==NULL) return 0;

			// 마지막 포인트인지 확인 후 PCControl ReviewEnd 전송
			// �� Ʈ�� Ȯ�� PCControl ReviewEnd ��
			CGlassResult *pGlassResult = m_pRP2P->IRP2P_GetCurrentGlassResult();
			CSequenceProcessor* pSequenceProcessor = m_pRP2P->IRP2P_GetSequenceProcessor();
			if (pGlassResult==NULL \|\| pSequenceProcessor==NULL)
			@@ -908,7 +908,7 @@
			return 1;
			}

			// 조건확인
			// ��Ȯ��
			if (pGlassResult->CheckWsiReflowComplete())
			{
			m_pRP2P->IRP2P_DisplayMessage(_T("Wsi Reflow Last Point Complete! "));
			@@ -932,7 +932,7 @@
			{
			if (m_pRP2P==NULL) return 0;

			// 마지막 포인트인지 확인 후 PCControl ReviewEnd 전송
			// �� Ʈ�� Ȯ�� PCControl ReviewEnd ��
			CGlassResult *pGlassResult = m_pRP2P->IRP2P_GetCurrentGlassResult();
			CSequenceProcessor* pSequenceProcessor = m_pRP2P->IRP2P_GetSequenceProcessor();
			if (pGlassResult==NULL \|\| pSequenceProcessor==NULL)
			@@ -940,7 +940,7 @@
			return 1;
			}

			// 조건확인
			// ��Ȯ��
			if (pGlassResult->CheckWsiUserComplete())
			{
			m_pRP2P->IRP2P_DisplayMessage(_T("Wsi Last Point Complete! "));
			@@ -965,7 +965,7 @@
			{
			if (m_pRP2P == NULL) return 0;

			// 마지막 포인트인지 확인 후 PCControl ReviewEnd 전송
			// �� Ʈ�� Ȯ�� PCControl ReviewEnd ��
			CGlassResult *pGlassResult = m_pRP2P->IRP2P_GetCurrentGlassResult();
			CSequenceProcessor* pSequenceProcessor = m_pRP2P->IRP2P_GetSequenceProcessor();
			if (pGlassResult == NULL \|\| pSequenceProcessor == NULL)
			@@ -973,7 +973,7 @@
			return 1;
			}

			// 조건확인
			// ��Ȯ��
			if (pGlassResult->CheckWsiMultiShotComplete())
			{
			m_pRP2P->IRP2P_DisplayMessage(_T("WsiMultiShot Last Point Complete! "));
			@@ -1138,23 +1138,23 @@
			return ReviewResult_Process_Fail;
			}

			// Snap 시간 저장.
			// Snap �ð� ��.
			CTime snapTime = CTime::GetCurrentTime();
			pReviewResult->strSnapTime.Format(_T("%04d%02d%02d%02d%02d%02d"), snapTime.GetYear(), snapTime.GetMonth(), snapTime.GetDay(),
			snapTime.GetHour(), snapTime.GetMinute(), snapTime.GetSecond()); // snap_time

			// 리뷰 업로드 이미지 파일 이름 만들기
			// 占쏙옙占쏙옙 占쏙옙占싸듸옙 占싱뱄옙占쏙옙 占쏙옙占쏙옙 占싱몌옙 占쏙옙占쏙옙占?
			CString strImageFileName = _T("");
			if (MakeReviewImageFileName(pReviewResult)==FALSE)
			{

			}

			//결과파일 공유 메모리 리뷰 이미지 이름 및 좌표 채워주기
			//占쏙옙占쏙옙占쏙옙占?占쏙옙占쏙옙 占쌨몌옙 占쏙옙占쏙옙 占싱뱄옙占쏙옙 占싱몌옙 占쏙옙 占쏙옙표 채占쏙옙占쌍깍옙
			if(!UpdateMemoryReviewPlan(pReviewResult))
			m_pRP2P->IRP2P_DisplayMessage(_T("[ReviewPlan] Memory Update Fail!! DefectIdx : %d"), pReviewResult->nDefectidx2);

			// 로컬 이미지 저장 파일 이름
			// �� ̹�� ̸�
			pReviewResult->strImgFileName = m_strSaveImageBasePath + _T("\\") +pReviewResult->strImgFileName;
			pReviewResult->nOpticType = 1;

			@@ -1178,28 +1178,30 @@
			// UINT64 nSize = SaveReviewImage(&uploadImage, strPath, m_nReviewImageSize, m_nReviewImageQuality, m_nReviewImageStep);
			//if (nSize > 0)
			// m_pRP2P->IRP2P_DisplayMessage(_T("Backup Review Image Save Success! Size: %d byte [%s]"), nSize, pReviewResult->strUploadImgFileName);
			// 업로드 이미지 경로 수정 20190917 chm
			// 占쏙옙占싸듸옙 占싱뱄옙占쏙옙 占쏙옙占?占쏙옙占쏙옙 20190917 chm
			strPath.Format(_T("%s\\%s"), m_strSaveImageUploadPath, pReviewResult->strUploadImgFileName);
			nSize = SaveReviewImage(&uploadImage, strPath, m_nReviewImageSize, m_nReviewImageQuality, m_nReviewImageStep);
			m_pRP2P->IRP2P_DisplayMessage(_T("Backup Review Image Save Success! Size: %d byte [%s]"), nSize, strPath);

			if (pGlassResult != NULL)
			{
			{
			pGlassResult->m_strUploadImgFileName = m_strSaveImageUploadPath;
			//taek 210203
			strRTMSPath.Format(_T("\\\\126.100.100.5\\Reviewimage\\%s\\%s\\%s"), pGlassResult->m_strRTMSStepID, pGlassResult->m_strGlassID, pReviewResult->strUploadImgFileName);
			int bRet = SaveReviewImage(&uploadImage, strRTMSPath, m_nReviewImageSize, m_nReviewImageQuality, m_nReviewImageStep); //Taek Rtms 210126
			if (bRet == 0)
			{
			m_pRP2P->IRP2P_DisplayMessage(_T("RTMS Review Image Save Fail [%s] index[%d]"), strRTMSPath, pReviewResult->nDefectIdx);
			m_pRP2P->IRP2P_DisplayMessage(_T("RTMS Review Image Save Fail!!"));
			}
			else m_pRP2P->IRP2P_DisplayMessage(_T("RTMS Review Image Save Success! Size: %d byte [%s] index[%d]"), nSize, strRTMSPath, pReviewResult->nDefectIdx); //taek 210128 속도 문제로 임시로 로그 남기지 않음
			}

			else m_pRP2P->IRP2P_DisplayMessage(_T("RTMS Review Image Save Success! Size: %d byte [%s] index[%d]"), nSize, strRTMSPath, pReviewResult->nDefectIdx); //taek 210128 �ӵ� �� ӽ÷� �α� ��

			}
			if (nSize > 0)
			{

			int aoiindex = CDitGlassRawClient::GetInstance()->GetDefectData(pReviewResult->nDefectidx2)->m_nDefectIdx;
			m_pRP2P->IRP2P_DisplayMessage(_T("Upload Review Image Save Success! Size: %d byte [%s] index[%d] AOI NO[%d]"), nSize, strRTMSPath, pReviewResult->nDefectIdx, aoiindex); //taek 210128 속도 문제로 임시로 로그 남기지 않음

			m_pRP2P->IRP2P_DisplayMessage(_T("Upload Review Image Save Success! Size: %d byte [%s] index[%d] AOI NO[%d]"), nSize, pReviewResult->strUploadImgFileName, pReviewResult->nDefectIdx, aoiindex); //taek 210128 속도 문제로 임시로 로그 남기지 않음
			//m_pRP2P->IRP2P_DisplayMessage(_T("Upload Review Image Save Success! Size: %d byte [%s]"), nSize, pReviewResult->strUploadImgFileName);
			}
			else
			@@ -1235,7 +1237,7 @@
			const CRsRcpReviewInfo* psRcpReviewInfo = m_pRP2P->IRP2P_Recipe_GetRsRcpReviewInfo();
			if(psRcpReviewInfo== NULL) m_pRP2P->IRP2P_DisplayMessage(_T("RcpReviewInfo is NULL"));

			if(psRcpReviewInfo->m_bDefocusUse) //190819chm 디포커스 알람 사용
			if(psRcpReviewInfo->m_bDefocusUse) //190819chm 占쏙옙占쏙옙커占쏙옙 占싯띰옙 占쏙옙占?
			{
			if(pReviewResult->nLocation == DefectLoc_ASG \|\| pReviewResult->nLocation == DefectLoc_PAD \|\| pReviewResult->nLocation == DefectLoc_C2C)
			{
			@@ -1276,22 +1278,21 @@
			}
			}

			if (pReviewResult->nModuleIdx == 0)
			if (pReviewResult->nModuleIdx == 0 && m_pRP2P->IRP2P_GetFirstReviewLeft())
			{
			m_pRP2P->IRP2P_GetCurrentGlassResult()->nReview00ImageContrast = dFocusValue;
			/* double dAverageGray = 0.0;
			if (CCHImageProcess::ImageAverage(pImageData, dAverageGray) == 1)
			{
			m_pRP2P->IRP2P_GetCurrentGlassResult()->nReview00ImageContrast = dAverageGray;
			}*/
			}
			else
			m_pRP2P->IRP2P_SetFirstReviewLeft(FALSE);
			m_pRP2P->IRP2P_DisplayMessage(_T("FirstReviewLeft FDC FocusValue = %.2f "), dFocusValue);
			}
			else if(pReviewResult->nModuleIdx == 1 && m_pRP2P->IRP2P_GetFirstReviewRight())
			{
			m_pRP2P->IRP2P_GetCurrentGlassResult()->nReview01ImageContrast = dFocusValue;

			m_pRP2P->IRP2P_SetFirstReviewRight(FALSE);
			m_pRP2P->IRP2P_DisplayMessage(_T("FirstReviewRight FDC FocusValue = %.2f "), dFocusValue);
			}
			}
			}
			//#3524_210723_LYW_CF AOI Review 디포커스 알람 추가 및 FDC 보고 방식 개선 MOD Start
			else
			{
			double dFocusValue = 0.;
			@@ -1309,15 +1310,21 @@
			dFocusValue = CalcFocusValue(imageConvert.GetImageBuffer(), imageConvert.GetWidth(), imageConvert.GetHeight());
			}

			if (pReviewResult->nModuleIdx == 0)
			if (pReviewResult->nModuleIdx == 0 && m_pRP2P->IRP2P_GetFirstReviewLeft())
			{
			m_pRP2P->IRP2P_GetCurrentGlassResult()->nReview00ImageContrast = dFocusValue;
			m_pRP2P->IRP2P_SetFirstReviewLeft(FALSE);
			m_pRP2P->IRP2P_DisplayMessage(_T("FirstReviewLeft FDC FocusValue = %.2f "), dFocusValue);
			}
			else
			else if (pReviewResult->nModuleIdx == 1 && m_pRP2P->IRP2P_GetFirstReviewRight())
			{
			m_pRP2P->IRP2P_GetCurrentGlassResult()->nReview01ImageContrast = dFocusValue;
			m_pRP2P->IRP2P_SetFirstReviewRight(FALSE);
			m_pRP2P->IRP2P_DisplayMessage(_T("FirstReviewRight FDC FocusValue = %.2f "), dFocusValue);

			}
			}
			//#3524_210723_LYW_CF AOI Review 디포커스 알람 추가 및 FDC 보고 방식 개선 MOD End



			@@ -1337,12 +1344,12 @@
			return ReviewResult_Process_Fail;
			}

			// Snap 시간 저장.
			// Snap �ð� ��.
			CTime snapTime = CTime::GetCurrentTime();
			pReviewResult->strSnapTime.Format(_T("%04d%02d%02d%02d%02d%02d"), snapTime.GetYear(), snapTime.GetMonth(), snapTime.GetDay(),
			snapTime.GetHour(), snapTime.GetMinute(), snapTime.GetSecond()); // snap_time

			// 리뷰 업로드 이미지 파일 이름 만들기
			// 占쏙옙占쏙옙 占쏙옙占싸듸옙 占싱뱄옙占쏙옙 占쏙옙占쏙옙 占싱몌옙 占쏙옙占쏙옙占?
			CString strImageFileName = _T("");
			if (MakeUserImageFileName(pReviewResult)==FALSE)
			{
			@@ -1355,7 +1362,7 @@
			m_pRP2P->IRP2P_DisplayMessage(_T("[UserPlan] Memory Update Fail!! DefectIdx : %d"), pReviewResult->nDefectidx2);


			//// 로컬 이미지 저장 파일 이름
			//// �� ̹�� ̸�
			//strImageFileName.Format(_T("ModuleIdx[%d]_PointIdx[%d]_Zoom[%d]"), pReviewResult->nModuleIdx, pReviewResult->nResultIdx, pReviewResult->nZoomIdx);
			//pReviewResult->strImgFileName = strImageFileName;

			@@ -1374,10 +1381,10 @@
			UINT64 nSize = SaveReviewImage(&uploadImage, strPath, m_nReviewImageSize, m_nReviewImageQuality, m_nReviewImageStep);
			m_pRP2P->IRP2P_DisplayMessage(_T("Upload Review Image Save Success! Size: %d byte"), nSize);

			//uploadImage.SaveImage(strPath, 40); // 화질 60% 150k
			//uploadImage.SaveImage(strPath, 40); // ȭ�� 60% 150k
			if(GetReviewProcessStatus() == ReviewProcessStatus_UserStart)
			{
			// 업로드 이미지 경로 수정 20190917 chm
			// 占쏙옙占싸듸옙 占싱뱄옙占쏙옙 占쏙옙占?占쏙옙占쏙옙 20190917 chm
			//strPath.Format(_T("%s\\%s\\%s"), m_strSaveImageUploadPath, m_strGlassID, pReviewResult->strUploadImgFileName);
			strPath.Format(_T("%s\\%s"), m_strSaveImageUploadPath, pReviewResult->strUploadImgFileName);
			nSize = SaveReviewImage(&uploadImage, strPath, m_nReviewImageSize, m_nReviewImageQuality, m_nReviewImageStep);
			@@ -1399,7 +1406,7 @@
			const CRsRcpReviewInfo* psRcpReviewInfo = m_pRP2P->IRP2P_Recipe_GetRsRcpReviewInfo();
			if(psRcpReviewInfo== NULL) m_pRP2P->IRP2P_DisplayMessage(_T("RcpReviewInfo is NULL"));

			if(psRcpReviewInfo->m_bDefocusUse) //190819chm 디포커스 알람 사용
			if(psRcpReviewInfo->m_bDefocusUse) //190819chm 占쏙옙占쏙옙커占쏙옙 占싯띰옙 占쏙옙占?
			{
			if(pReviewResult->nLocation == DefectLoc_ASG \|\| pReviewResult->nLocation == DefectLoc_PAD \|\| pReviewResult->nLocation == DefectLoc_C2C)
			{
			@@ -1422,9 +1429,23 @@
			if (imageConvert.GetImageExist())
			{
			dFocusValue = CalcFocusValue(imageConvert.GetImageBuffer(), imageConvert.GetWidth(), imageConvert.GetHeight());

			if (pReviewResult->nModuleIdx == 0 && m_pRP2P->IRP2P_GetFirstReviewLeft())
			{
			m_pRP2P->IRP2P_GetCurrentGlassResult()->nReview00ImageContrast = dFocusValue;
			m_pRP2P->IRP2P_SetFirstReviewLeft(FALSE);
			m_pRP2P->IRP2P_DisplayMessage(_T("FirstReviewLeft FDC FocusValue = %.2f "), dFocusValue);
			}
			else if (pReviewResult->nModuleIdx == 1 && m_pRP2P->IRP2P_GetFirstReviewRight())
			{
			m_pRP2P->IRP2P_GetCurrentGlassResult()->nReview01ImageContrast = dFocusValue;
			m_pRP2P->IRP2P_SetFirstReviewRight(FALSE);
			m_pRP2P->IRP2P_DisplayMessage(_T("FirstReviewRight FDC FocusValue = %.2f "), dFocusValue);

			}

			}


			// count defocus
			CGlassResult* pGlassResult = m_pRP2P->IRP2P_GetCurrentGlassResult();
			if (pGlassResult)
			@@ -1444,6 +1465,39 @@
			}
			}

			//#3524_210723_LYW_CF AOI Review 디포커스 알람 추가 및 FDC 보고 방식 개선 ADD Start
			else
			{
			double dFocusValue = 0.;
			CCHImageData imageConvert;
			if (pImageData->GetChannels() != 1)
			{
			CCHImageProcess::ImageConvert(pImageData, &imageConvert, ConvertTypeRGB2Gray);
			}
			else
			{
			pImageData->CopyImageTo(&imageConvert);
			}
			if (imageConvert.GetImageExist())
			{
			dFocusValue = CalcFocusValue(imageConvert.GetImageBuffer(), imageConvert.GetWidth(), imageConvert.GetHeight());
			}

			if (pReviewResult->nModuleIdx == 0 && m_pRP2P->IRP2P_GetFirstReviewLeft())
			{
			m_pRP2P->IRP2P_GetCurrentGlassResult()->nReview00ImageContrast = dFocusValue;
			m_pRP2P->IRP2P_SetFirstReviewLeft(FALSE);
			m_pRP2P->IRP2P_DisplayMessage(_T("FirstReviewLeft FDC FocusValue = %.2f "), dFocusValue);
			}
			else if (pReviewResult->nModuleIdx == 1 && m_pRP2P->IRP2P_GetFirstReviewRight())
			{
			m_pRP2P->IRP2P_GetCurrentGlassResult()->nReview01ImageContrast = dFocusValue;
			m_pRP2P->IRP2P_SetFirstReviewRight(FALSE);
			m_pRP2P->IRP2P_DisplayMessage(_T("FirstReviewRight FDC FocusValue = %.2f "), dFocusValue);

			}
			}
			//#3524_210723_LYW_CF AOI Review 디포커스 알람 추가 및 FDC 보고 방식 개선 ADD End

			return ReviewResult_Process_Complete;
			}
			@@ -1457,7 +1511,7 @@

			int nTestMode = FALSE;

			//시뮬 돌릴려는 이미지 파일 선택 20190827 chm
			//�ù� �� ̹�� 20190827 chm
			if(nTestMode){
			Sleep(500);
			CString strPathName;
			@@ -1479,12 +1533,12 @@
			return ReviewResult_Process_Fail;
			}

			// Snap 시간 저장.
			// Snap �ð� ��.
			CTime snapTime = CTime::GetCurrentTime();
			pReviewResult->strSnapTime.Format(_T("%04d%02d%02d%02d%02d%02d"), snapTime.GetYear(), snapTime.GetMonth(), snapTime.GetDay(),
			snapTime.GetHour(), snapTime.GetMinute(), snapTime.GetSecond()); // snap_time

			// 리뷰 업로드 이미지 파일 이름 만들기
			// 占쏙옙占쏙옙 占쏙옙占싸듸옙 占싱뱄옙占쏙옙 占쏙옙占쏙옙 占싱몌옙 占쏙옙占쏙옙占?
			CString strImageFileName = _T("");
			if (MakeReflowImageFileName(pReviewResult)==FALSE)
			{
			@@ -1500,8 +1554,8 @@
			}


			reflowParam reParam; //Reflow 연산 정보
			reflowResult reResult;//Reflow 결과 정보
			reflowParam reParam; //Reflow ��
			reflowResult reResult;//Reflow 占쏙옙占?占쏙옙占쏙옙

			//////////////////////////////////////////////////////////////////////////////////////////////
			BOOL btFlag =0;
			@@ -1513,10 +1567,10 @@
			CCHImageData tempImage;
			tempImageOrigin.CopyImageFrom(pImageData);

			if(pReviewResult->nReflow_Side==7) // 바텀 연산
			if(pReviewResult->nReflow_Side==7) // ��
			{
			btFlag=1;
			CCHImageProcess::ImageRotate(pImageData,&tempImage,135);//바텀 이미지를 Right 회전 시켜 Right 연산 실행
			CCHImageProcess::ImageRotate(pImageData,&tempImage,135);//�� ̹�� Right ȸ�� Right ��
			pImageData = &tempImage;
			//reParam.nImageWidth = 2048;
			//reParam.nImageHeight = 2432;
			@@ -1626,9 +1680,9 @@

			CCHImageData tmepData2;
			if(btFlag==1){
			CCHImageProcess::ImageRotate(pImageData,&tmepData2,135);//Right 연산후 다시 이미지 돌리기
			CCHImageProcess::ImageRotate(pImageData,&tmepData2,135);//Right �� ٽ� �̹��
			pImageData= &tmepData2;
			//pImageData->SaveImage(_T("D:\\Testafter.bmp"));//Test 를 위한 bmp 저장
			//pImageData->SaveImage(_T("D:\\Testafter.bmp"));//Test �� bmp ��
			}


			@@ -1653,17 +1707,17 @@
			UINT64 nSize = SaveReviewImage(&uploadImage, strPath, m_nReviewImageSize, m_nReviewImageQuality, m_nReviewImageStep);
			m_pRP2P->IRP2P_DisplayMessage(_T("Upload Review Image Save Success! Size: %d byte"), nSize);

			//uploadImage.SaveImage(strPath, 40); // 화질 60% 150k
			//uploadImage.SaveImage(strPath, 40); // ȭ�� 60% 150k
			if(GetReviewProcessStatus() == ReviewProcessStatus_ReflowStart)
			{
			// 업로드 이미지 경로 수정 20190917 chm
			// 占쏙옙占싸듸옙 占싱뱄옙占쏙옙 占쏙옙占?占쏙옙占쏙옙 20190917 chm
			//strPath.Format(_T("%s\\%s\\%s"), m_strSaveImageUploadPath, m_strGlassID, pReviewResult->strUploadImgFileName);
			strPath.Format(_T("%s\\%s"), m_strSaveImageUploadPath, pReviewResult->strUploadImgFileName);
			nSize = SaveReviewImage(&uploadImage, strPath, m_nReviewImageSize, m_nReviewImageQuality, m_nReviewImageStep);

			m_pRP2P->IRP2P_DisplayMessage(_T("Upload Reflow Image Save Success! Size: %d byte"), nSize);

			//시뮬돌리고 이미지 자동으로 열어줌 20190927chm
			//�ùĵ�� ̹�� ڵ�� 20190927chm
			if(nTestMode)
			{
			CString csParam;
			@@ -1683,7 +1737,7 @@
			m_pRP2P->IRP2P_DisplayMessage(_T("Upload Reflow Image Save Fail![%s]"), pReviewResult->strUploadImgFileName);
			}

			//공유메모리 업데이트
			//��޸� ��Ʈ
			if(!UpdateMemoryReflowPlan(pReviewResult))
			m_pRP2P->IRP2P_DisplayMessage(_T("[ReflowPlan] Memory Update Fail!! DefectIdx : %d"), pReviewResult->nDefectidx2);

			@@ -1896,7 +1950,7 @@



			//파일명 181227 cmark
			//��ϸ� 181227 cmark
			BOOL CReviewProcessor_CPJT::MakeReviewImageFileName(SReviewResult* pReviewResult)
			{
			if (m_pRP2P==NULL \|\| pReviewResult==NULL) return FALSE;
			@@ -1909,7 +1963,7 @@

			if(GetReviewProcessStatus() == ReviewProcessStatus_ReviewStart)
			{
			// [2017:6:5]-[WEZASW] : Review Image 파일명에 '*' 사용 금지.(예외처리)
			// [2017:6:5]-[WEZASW] : Review Image 占쏙옙占싹몌옙占?'*' 占쏙옙占?占쏙옙占쏙옙.(占쏙옙占쏙옙처占쏙옙)
			if (pReviewResult->strDefectCode.Compare(_T("***")) == 0)
			strDefectCodeTemp = _T("DC");
			else
			@@ -2000,23 +2054,24 @@
			snapTime.GetHour(), snapTime.GetMinute(), snapTime.GetSecond()); // snap_time


			// [2017:4:10]-[WEZASW] : 고객사 요청에 의한 bmp 파일 추가 저장. (임시사용)
			// [2017:4:10]-[WEZASW] : 占쏙옙占쏙옙占?占쏙옙청占쏙옙 占쏙옙占쏙옙 bmp 占쏙옙占쏙옙 占쌩곤옙 占쏙옙占쏙옙. (占쌈시삼옙占?
			pReviewResult->strOrignalImgFileName = strFileName + _T(".bmp");

			strFileName += _T(".jpg");
			pReviewResult->strUploadImgFileName = strFileName;
			pReviewResult->strImgFileName = strFileName;
			pReviewResult->strImgFilePath = GetReviewUploadImagePath();
			return TRUE;
			}


			int CReviewProcessor_CPJT::ProcessWSIReflow(int nThreadIdx, SReviewResult* pReviewResult)
			{
			// [2016:11:15]-[WEZASW] : 점검 필요
			// [2016:11:15]-[WEZASW] : �� ʿ�
			if(!UpdateMemoryWsiReflowPlan(pReviewResult))
			m_pRP2P->IRP2P_DisplayMessage(_T("[WsiReflowPlan] Memory Update Fail!! DefectIdx : %d"), pReviewResult->nDefectidx2);

			// wsi용 return 값으로 수정 [6/20/2017 bhs]
			// wsi�� return �� [6/20/2017 bhs]
			return WsiResultSuccess;
			}

			@@ -2060,7 +2115,7 @@

			if(GetReviewProcessStatus() == ReviewProcessStatus_UserStart)
			{
			// [2017:6:5]-[WEZASW] : Review Image 파일명에 '*' 사용 금지.(예외처리)
			// [2017:6:5]-[WEZASW] : Review Image 占쏙옙占싹몌옙占?'*' 占쏙옙占?占쏙옙占쏙옙.(占쏙옙占쏙옙처占쏙옙)
			if (pReviewResult->strDefectCode.Compare(_T("***")) == 0)
			strDefectCodeTemp = _T("DC");
			else
			@@ -2154,12 +2209,13 @@
			// strFileName += pReviewResult->strSnapTime;
			// }

			// [2017:4:10]-[WEZASW] : 고객사 요청에 의한 bmp 파일 추가 저장. (임시사용)
			// [2017:4:10]-[WEZASW] : 占쏙옙占쏙옙占?占쏙옙청占쏙옙 占쏙옙占쏙옙 bmp 占쏙옙占쏙옙 占쌩곤옙 占쏙옙占쏙옙. (占쌈시삼옙占?
			pReviewResult->strOrignalImgFileName = strFileName + _T(".bmp");

			strFileName += _T(".jpg");
			pReviewResult->strUploadImgFileName = strFileName;
			pReviewResult->strImgFileName = strFileName;
			pReviewResult->strImgFilePath = GetReviewUploadImagePath();
			return TRUE;
			}

			@@ -2230,13 +2286,13 @@

			void CReviewProcessor_CPJT::LoadAoiImage(const CString& strGlassID, int nOpticType, int nPosX, int nPosY, CCHImageData* pAoiDark, CCHImageData *pAoiBright)
			{
			// 3. 검사 결함 이미지 찾기
			// 3. �˻� �� ̹�� ã��
			CString strAoiDarkPath = _T("");
			CString strAoiBrightPath = _T("");

			FindAoiDefectImagePath(strGlassID, nOpticType, nPosX, nPosY, strAoiDarkPath, strAoiBrightPath);

			// Dark, Bright 모두 찾기 위해 주석처리 [2017.7.1 bhs]
			// Dark, Bright 占쏙옙占?찾占쏙옙 占쏙옙占쏙옙 占쌍쇽옙처占쏙옙 [2017.7.1 bhs]
			// Dark image
			//if(nOpticType & DEFECT_OPTIC_DARK)
			{
			@@ -2281,7 +2337,7 @@
			CFileFind finder;
			CString strSearchPath = _T("");

			// Dark, Bright 모두 찾기 위해 주석처리 [2017.7.1 bhs]
			// Dark, Bright 占쏙옙占?찾占쏙옙 占쏙옙占쏙옙 占쌍쇽옙처占쏙옙 [2017.7.1 bhs]
			//if (nOpticType & DEFECT_OPTIC_DARK)
			{
			// Dark field
			@@ -2355,7 +2411,7 @@
			processTimer.End();
			}

			// 4-3. 리뷰평균 밝기
			// 4-3. 占쏙옙占쏙옙占쏙옙占?占쏙옙占?
			double dAverageGray = 0.0;
			if (CCHImageProcess::ImageAverage(&bandImage, dAverageGray)==1)
			{
			@@ -2392,14 +2448,14 @@
			CCHImageData pReviewCam;
			CCHImageData tempImage1;

			// 설정값 이미지 회전
			// �� ̹�� ȸ��
			if (m_nImageRotate > 0)
			{
			tempImage1.CopyImageFrom(pReviewCamSource);
			CCHImageProcess::ImageRotate(pReviewCamSource, &tempImage1, (90.0*m_nImageRotate));
			}

			// 설정값 이미지 반전
			// �� ̹��
			if (m_nimageFlip > 0)
			{
			if(m_nImageRotate > 0)
			@@ -2436,7 +2492,7 @@

			// set total size * scale
			int nTotalWidth = int(m_nReviewResizeWidth * m_dReviewImageScale + 0.5);
			// 20170817 smok Dark, Bright 이미지가 리뷰 이미지 아래에 붙도록 수정
			// 20170817 smok Dark, Bright �̹�� ̹�� Ʒ�� ٵ��
			int nTotalHeight = int(m_nReviewResizeHeight * m_dReviewImageScale + 0.5 + max(pAoiDark2.GetHeight(), pAoiBright2.GetHeight()));
			int nTotalHeight2 = int(m_nReviewResizeHeight * m_dReviewImageScale + 0.5);

			@@ -2462,14 +2518,14 @@
			double dRulerGab = 20.0 / m_dReviewImageScale;
			double dScaleResolution = pReviewResult->dMeasureResolution / m_dReviewImageScale;

			//DrawRuler(&memDC, nTotalWidth, nTotalHeight2, dScaleResolution, dRulerGab); // resolution, ruler gab //taek 210127 사용 X
			//DrawRuler(&memDC, nTotalWidth, nTotalHeight2, dScaleResolution, dRulerGab); // resolution, ruler gab //taek 210127 占쏙옙占?X

			// draw text string
			DrawDefectInfo(&memDC, findResult, pReviewResult);

			//DrawAoiImage(&memDC, &pAoiDark2, &pAoiBright2, &pAoiDark2, &pAoiBright2, nAoiWidth, nAoiHeight);

			// draw line 히팅 검증용
			// draw line ��
			//DrawCenterLine(&memDC, nTotalWidth, nTotalHeight);
			// DrawCenterRect(&memDC, nTotalWidth, nTotalHeight, 100, 100, pReviewResult->dMeasureResolution);

			@@ -2497,7 +2553,7 @@

			nWidthDark = nHeightDark = nWidthBright = nHeightBright = 0;

			// 20170817 smok Dark, Bright 이미지가 리뷰 이미지 아래에 붙도록 수정
			// 20170817 smok Dark, Bright �̹�� ̹�� Ʒ�� ٵ��
			// dark
			CCHImageData subImage;
			if(pAoiDark!=NULL && pAoiDark->GetImageExist())
			@@ -2578,11 +2634,11 @@
			int nTotalWidth = int(m_nReviewResizeWidth * m_dReviewImageScale + 0.5);
			int nTotalHeight = int(m_nReviewResizeHeight * m_dReviewImageScale + 0.5);

			// Dark, Bright 이미지가 나란히 붙도록 수정, Dark 위, Bright 아래 - 고객사 요청[2017.6.30 bhs]
			// Dark, Bright 占싱뱄옙占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙 占쌕듸옙占쏙옙 占쏙옙占쏙옙, Dark 占쏙옙, Bright 占싣뤄옙 - 占쏙옙占쏙옙占?占쏙옙청[2017.6.30 bhs]
			//int nX = nTotalWidth - nWidth;
			//int nY = nTotalHeight - (nHeight * 2);

			// 20170817 smok Dark, Bright 이미지가 리뷰 이미지 아래에 붙도록 수정
			// 20170817 smok Dark, Bright �̹�� ̹�� Ʒ�� ٵ��
			int nX = 0;
			int nY = nTotalHeight;
			pAoiDark1->ShowImage(pDC->m_hDC, nX, nY, pAoiDark1->GetWidth(), pAoiDark1->GetHeight(), 0, 0);
			@@ -2590,7 +2646,7 @@
			//pAoiDark1->ShowImage(pDC->m_hDC, nTotalWidth - nWidth, nTotalHei4ght-nHeight, pAoiDark1->GetWidth(), pAoiDark1->GetHeight(), 0, 0);
			//pAoiBright1->ShowImage(pDC->m_hDC, nTotalWidth - nWidth, nTotalHeight-nHeight, pAoiBright1->GetWidth(), pAoiBright1->GetHeight(), 0, 0);

			// 검사 이미지 중앙에 화살표 표시 - 고객사 요청 [2017.6.30 bhs]
			// 占싯삼옙 占싱뱄옙占쏙옙 占쌩앙울옙 화占쏙옙표 표占쏙옙 - 占쏙옙占쏙옙占?占쏙옙청 [2017.6.30 bhs]
			CFont Font;
			VERIFY(Font.CreateFont(
			50, // nHeight
			@@ -2611,7 +2667,7 @@
			CFont *pOldFont = pDC->SelectObject(&Font);
			pDC->SetTextColor(RGB(255,0,0));

			CString strArrow = _T("↗");
			CString strArrow = _T("��");
			CSize size = pDC->GetTextExtent(strArrow);
			int nCenterX = nX + (nWidth / 2) - size.cx;
			int nCenterY = nY + (nHeight / 2)/* + (size.cy / 2)*/;
			@@ -2814,7 +2870,7 @@
			else {
			wchar_t pstrPrefix[128] ={};

			//Zone 넘버 210127
			//Zone �ѹ� 210127
			int nValue = 0;
			for (int i = 15; i >= 0; i--)
			{
			@@ -2825,8 +2881,8 @@
			}

			//taek 210127
			//결과파일 좌표값 y 는 *-1을 하자
			//설비 ID, 검사 카메라 정보, 검사 Camera 정보 : (? ) 캠 ?, Cell ID, Review Cam 정보 : Gantry 정보, 검출 Size, 검출 Zone 정보, Stak Flag, CODE 정보, 좌표 정보
			//占쏙옙占쏙옙占쏙옙占?占쏙옙표占쏙옙 y 占쏙옙 *-1占쏙옙 占쏙옙占쏙옙
			//�� ID, �˻� ī�޶� ��, �˻� Camera �� : (? ) ķ ?, Cell ID, Review Cam �� : Gantry ��, �� Size, �� Zone ��, Stak Flag, CODE ��, ��ǥ ��

			// PPID
			// strValue.Format(_T("Tool[%s].Recipe[%s].ScanNo[%d/%d].Time[%4d/%2d/%2d_%d:%d:%d].MaxGray[%d].RefGray[%d].REVCnt[%d]"),pReviewResult->strEquipID,pGlassResult->m_strPPID,pReviewResult->nAOIScanIdx,0,snapTime.GetYear(), snapTime.GetMonth(), snapTime.GetDay(),
			@@ -3041,7 +3097,7 @@

			if(GetReviewProcessStatus() == ReviewProcessStatus_ReflowStart)
			{
			// [2017:6:5]-[WEZASW] : Review Image 파일명에 '*' 사용 금지.(예외처리)
			// [2017:6:5]-[WEZASW] : Review Image 占쏙옙占싹몌옙占?'*' 占쏙옙占?占쏙옙占쏙옙.(占쏙옙占쏙옙처占쏙옙)
			if (pReviewResult->strDefectCode.Compare(_T("***")) == 0)
			strDefectCodeTemp = _T("DC");
			else
			@@ -3118,7 +3174,7 @@
			// strFileName += pReviewResult->strSnapTime;
			// }

			// [2017:4:10]-[WEZASW] : 고객사 요청에 의한 bmp 파일 추가 저장. (임시사용)
			// [2017:4:10]-[WEZASW] : 占쏙옙占쏙옙占?占쏙옙청占쏙옙 占쏙옙占쏙옙 bmp 占쏙옙占쏙옙 占쌩곤옙 占쏙옙占쏙옙. (占쌈시삼옙占?
			pReviewResult->strOrignalImgFileName = strFileName + _T(".bmp");

			strFileName += _T(".jpg");
			@@ -3164,7 +3220,7 @@
			int nStartResultIdx = pReviewResult->GetStartSReviewResultIndex();
			int nEndResultIdx = pReviewResult->GetEndSReviewResultIndex();

			// 인덱스가 현재 마지막 인덱스 보다 클시..
			// �ε�� ε�� Ŭ��..
			if (nCurResultIdx > nEndResultIdx)
			{
			LeaveCriticalSection(&m_csUserCriticalSection);
			@@ -3172,7 +3228,7 @@
			g_pLog->DisplayMessage(_T("[ReviewProcessor]SetWsiResultData module[%d] point[%d] result[%d]"), nModuleIndex, measureResut.nResultIndex, nCurResultIdx);
			}

			// 현재 결과데이터 저장
			// 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙占쏙옙占?占쏙옙占쏙옙
			wsiResult.nWsi_ResultCode = measureResut.nResultCode;
			wsiResult.dWsi_DamDistance = measureResut.dDamDistance;

			@@ -3182,7 +3238,7 @@
			}
			//memcpy(wsiResult.nWsi_pReflowResultData, measureResut.pReflowResultData, sizeof(wsiResult.nWsi_pReflowResultData));

			// 결과 데이터 추가
			// 占쏙옙占?占쏙옙占쏙옙占쏙옙 占쌩곤옙
			SReviewResult *pProcessResult = NULL;
			if (pGlassResult->SetWsiReflowResultData(nModuleIndex, nCurResultIdx, wsiResult, nGlassPosX, nGlassPosY, nMotorPosX, nMotorPosY, dTime))
			{
			@@ -3191,10 +3247,10 @@
			pProcessResult = pReviewResult->GetSReviewResult(nCurResultIdx);
			}

			// 저장 성공시, 리뷰 프로세서에 포인터 전달
			// �� , �� μ��
			if (pProcessResult)
			{
			// 처리 쓰레드 수행
			// ó��
			if (AddReviewProcessData(pProcessResult)==1)
			{
			g_pLog->DisplayMessage(_T("[ReviewProcessor]Add Wsi Reflow Process Data module[%d] result[%d]"), nModuleIndex, nCurResultIdx);
			@@ -3210,7 +3266,7 @@

			LeaveCriticalSection(&m_csUserCriticalSection);

			// 결과 갱신.
			// 占쏙옙占?占쏙옙占쏙옙.
			m_pRP2P->IRP2P_UpdateReviewResult(nModuleIndex, pGlassResult, 5);
			return;

			@@ -3219,7 +3275,7 @@
			return;
			}

			//0129cmark 원점 위치별 센터 좌표를 원점 좌표로 변형
			//0129cmark �� ġ�� ǥ�� ǥ��
			double CReviewProcessor_CPJT::GetCentertoOrginCoordinate(double dPosX,double dPosY,int nCornercut,int nOriginDirection){

			double nResultPosX=0.0;
			@@ -3228,60 +3284,60 @@
			// CornerCutDirection { CLeftTop=0, CRightTop, CLeftBottom, CRightBottom };
			// OriginDirection { OLeftTop=0, ORightTop, OLeftBottom, ORightBottom };

			if(nOriginDirection==RPOLeftTop){//오리진좌상
			if(nOriginDirection==RPOLeftTop){//��»�

			if(nCornercut == RPCLeftTop)//좌상
			if(nCornercut == RPCLeftTop)//�»�
			{
			nResultPosX = double(GLASS_SIZE_WIDTH)/2. - dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT)/2. - dPosY;

			}
			else if(nCornercut == RPCRightTop)//우상
			else if(nCornercut == RPCRightTop)//占쏙옙占?
			{
			nResultPosX = double(GLASS_SIZE_WIDTH)/2. - dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT)/2. + dPosY;

			}
			else if(nCornercut == RPCLeftBottom)//좌하
			else if(nCornercut == RPCLeftBottom)//��
			{
			nResultPosX = double(GLASS_SIZE_WIDTH)/2. + dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT)/2. - dPosY;
			}
			else if(nCornercut == RPCRightBottom)//우하
			else if(nCornercut == RPCRightBottom)//��
			{
			nResultPosX = double(GLASS_SIZE_WIDTH)/2 + dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT)/2 + dPosY;
			}
			}

			else if(nOriginDirection==RPORightTop){//오리진우상
			else if(nOriginDirection==RPORightTop){//占쏙옙占쏙옙占쏙옙占쏙옙占?

			if(nCornercut == RPCLeftTop)//좌상
			if(nCornercut == RPCLeftTop)//�»�
			{
			nResultPosX = double(GLASS_SIZE_WIDTH)/2. - dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT)/2. + dPosY;

			}
			else if(nCornercut == RPCRightTop)//우상
			else if(nCornercut == RPCRightTop)//占쏙옙占?
			{
			nResultPosX = double(GLASS_SIZE_WIDTH)/2. - dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT)/2. - dPosY;

			}
			else if(nCornercut == RPCLeftBottom)//좌하
			else if(nCornercut == RPCLeftBottom)//��
			{
			nResultPosX = double(GLASS_SIZE_WIDTH)/2. + dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT)/2. + dPosY;
			}
			else if(nCornercut == RPCRightBottom)//우하
			else if(nCornercut == RPCRightBottom)//��
			{
			nResultPosX = double(GLASS_SIZE_WIDTH)/2. + dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT)/2. - dPosY;
			}
			}
			else if(nOriginDirection==RPOLeftBottom){//오리진좌하
			else if(nOriginDirection==RPOLeftBottom){//��

			if(nCornercut == RPCLeftTop)//좌상
			if(nCornercut == RPCLeftTop)//�»�
			{
			//210402
			/* nResultPosX = double(GLASS_SIZE_WIDTH)/2. + dPosX;
			@@ -3290,13 +3346,13 @@
			nResultPosX = double(GLASS_SIZE_WIDTH) / 2. + dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT) / 2. + dPosY;
			}
			else if(nCornercut == RPCRightTop)//우상
			else if(nCornercut == RPCRightTop)//占쏙옙占?
			{
			nResultPosX = double(GLASS_SIZE_WIDTH)/2. + dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT)/2. + dPosY;

			}
			else if(nCornercut == RPCLeftBottom)//좌하
			else if(nCornercut == RPCLeftBottom)//��
			{
			//210402
			/*nResultPosX = double(GLASS_SIZE_WIDTH)/2. - dPosX;
			@@ -3304,33 +3360,33 @@
			nResultPosX = double(GLASS_SIZE_WIDTH) / 2. + dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT) / 2. + dPosY;
			}
			else if(nCornercut == RPCRightBottom)//우하
			else if(nCornercut == RPCRightBottom)//��
			{
			nResultPosX = double(GLASS_SIZE_WIDTH) / 2. - dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT) / 2. + dPosY;
			}
			}
			else if (nOriginDirection==RPORightBottom)
			{//오리진우하
			{//��

			if(nCornercut == RPCLeftTop)//좌상
			if(nCornercut == RPCLeftTop)//�»�
			{
			nResultPosX = double(GLASS_SIZE_WIDTH)/2. + dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT)/2. + dPosY;

			}
			else if(nCornercut == RPCRightTop)//우상
			else if(nCornercut == RPCRightTop)//占쏙옙占?
			{
			nResultPosX = double(GLASS_SIZE_WIDTH)/2. + dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT)/2. - dPosY;

			}
			else if(nCornercut == RPCLeftBottom)//좌하
			else if(nCornercut == RPCLeftBottom)//��
			{
			nResultPosX = double(GLASS_SIZE_WIDTH)/2. - dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT)/2. + dPosY;
			}
			else if(nCornercut == RPCRightBottom)//우하
			else if(nCornercut == RPCRightBottom)//��
			{
			nResultPosX = double(GLASS_SIZE_WIDTH)/2. - dPosX;
			nResultPosY = double(GLASS_SIZE_HEIGHT)/2. - dPosY;
			@@ -3355,7 +3411,7 @@
			CString strFileName = _T("");
			CString strDefectCodeTemp = _T("");

			// [2017:6:5]-[WEZASW] : Review Image 파일명에 '*' 사용 금지.(예외처리)
			// [2017:6:5]-[WEZASW] : Review Image 占쏙옙占싹몌옙占?'*' 占쏙옙占?占쏙옙占쏙옙.(占쏙옙占쏙옙처占쏙옙)
			if (pReviewResult->strDefectCode.Compare(_T("***")) == 0)
			strDefectCodeTemp = _T("DC");
			else
			@@ -3419,24 +3475,31 @@
			{
			if(pReviewResult == NULL) return FALSE;

			//결과파일 공유 메모리 리뷰 이미지 이름 및 좌표 채워주기
			//占쏙옙占쏙옙占쏙옙占?占쏙옙占쏙옙 占쌨몌옙 占쏙옙占쏙옙 占싱뱄옙占쏙옙 占싱몌옙 占쏙옙 占쏙옙표 채占쏙옙占쌍깍옙
			CDitGlassRawClient *pDitGlassRawCleint = CDitGlassRawClient::GetInstance();
			if(pDitGlassRawCleint->isConnect() == TRUE)
			{

			_grmDefectData* pSharedDefect = pDitGlassRawCleint->GetDefectData(pReviewResult->nDefectidx2);
			_grmDefectReviewData * pSharedDefectReview = &pSharedDefect->m_ReviewDefect;
			_grmGlassData* pSharedGlassData = pDitGlassRawCleint->GetGlassData();

			//size_t CharactersConverted;
			//wcstombs_s(&CharactersConverted, pSharedDefectReview->m_strRevImageName, pReviewResult->strImgFileName, _TRUNCATE);

			strcpy(pSharedDefectReview->m_strRevImageName,pReviewResult->strImgFileName.MakeLower());

			//taek 210624 �� ش�.

			pSharedDefectReview->m_nPlanType = ditRaw::RPT_Review; //0:None, 1:Location(User, Fiexed) Review, 4:reflower, ??:Wsi, 1000:AOI(외부 로컬 리뷰 명령)
			strcpy(pSharedDefectReview->m_strRevImagePath,pReviewResult->strImgFilePath.MakeLower());

			strcpy(pSharedGlassData->m_strAlignFirst, m_strReviewFirst.MakeLower());
			strcpy(pSharedGlassData->m_strAlignSecond, m_strReviewSecned.MakeLower());

			pSharedDefectReview->m_nPlanType = ditRaw::RPT_Review; //0:None, 1:Location(User, Fiexed) Review, 4:reflower, ??:Wsi, 1000:AOI(占쌤븝옙 占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占?
			pSharedDefectReview->m_nResultCode = 1; //0:None, 1:Success
			pSharedDefectReview->m_nShotIndex = pReviewResult->nResultIdx;
			//pSharedDefectReview->m_nShotIndex = GetPlanReviewCount(); //RTMS 기준에 따라 통합 관리면 요거 아니면 나눠서 하는 걸로 taek 210128
			//pSharedDefectReview->m_nShotIndex = GetPlanReviewCount(); //RTMS 占쏙옙占쌔울옙 占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙 占쏙옙占?占싣니몌옙 占쏙옙占쏙옙占쏙옙 占싹댐옙 占심뤄옙 taek 210128
			pSharedDefectReview->m_nModuleIndex = pReviewResult->nModuleIdx;
			pSharedDefectReview->m_nMagnificIndex = 20;
			pSharedDefectReview->m_fManification =pReviewResult->dMagnification;
			@@ -3450,11 +3513,11 @@

			BOOL CReviewProcessor_CPJT::UpdateMemoryUserPlan( SReviewResult* pReviewResult )
			{
			//결과파일 공유 메모리 리뷰 이미지 이름 및 좌표 채워주기
			//占쏙옙占쏙옙占쏙옙占?占쏙옙占쏙옙 占쌨몌옙 占쏙옙占쏙옙 占싱뱄옙占쏙옙 占싱몌옙 占쏙옙 占쏙옙표 채占쏙옙占쌍깍옙
			CDitGlassRawClient *pDitRawClient = CDitGlassRawClient::GetInstance();
			if(pDitRawClient->isConnect() == TRUE)
			{
			int nDefectCount = pDitRawClient->GetGlassData()->m_nDefectNum; // user,reflow 는 검사 디펙 이후 생성되기에 디펙 카운트보다 같거나 큰값을 가지고 있다
			int nDefectCount = pDitRawClient->GetGlassData()->m_nDefectNum; // user,reflow �� ˻� �� Ǳ⿡ �� ī��Ʈ�� ų� ū�� ִ�
			if(pReviewResult->nDefectIdx <nDefectCount)
			{
			return FALSE;
			@@ -3467,14 +3530,16 @@

			strcpy(pSharedDefectReview->m_strRevImageName,pReviewResult->strImgFileName);

			pSharedDefectReview->m_nPlanType = ditRaw::RPT_User; //0:None, 1:Location(User, Fiexed) Review, 4:reflower, ??:Wsi, 1000:AOI(외부 로컬 리뷰 명령)
			pSharedDefectReview->m_nPlanType = ditRaw::RPT_User; //0:None, 1:Location(User, Fiexed) Review, 4:reflower, ??:Wsi, 1000:AOI(占쌤븝옙 占쏙옙占쏙옙 占쏙옙占쏙옙 占쏙옙占?
			pSharedDefectReview->m_nResultCode = 1; //0:None, 1:Success
			pSharedDefectReview->m_nShotIndex = pReviewResult->nResultIdx;
			pSharedDefect->m_nShotIdx = pReviewResult->nResultIdx;
			pSharedDefectReview->m_nModuleIndex;
			pSharedDefect->m_nModelIdx = pReviewResult->nModuleIdx;
			pSharedDefectReview->m_nMagnificIndex = pReviewResult->dMagnification;
			pSharedDefectReview->m_fManification = pReviewResult->dMagnification;
			pSharedDefectReview->m_fManificResoultion = pReviewResult->dMagnification;
			m_pRP2P->IRP2P_DisplayMessage(_T("[공유메모리접근]인덱스[%d]파일명[%s]"),pReviewResult->nDefectidx2, pReviewResult->strUploadImgFileName);
			m_pRP2P->IRP2P_DisplayMessage(_T("[��޸��]�ε��[%d]��ϸ�[%s]"),pReviewResult->nDefectidx2, pReviewResult->strUploadImgFileName);
			}


			@@ -3484,7 +3549,7 @@
			BOOL CReviewProcessor_CPJT::UpdateMemoryReflowPlan( SReviewResult* pReviewResult )
			{
			if(pReviewResult == NULL) return FALSE;
			//결과파일 공유 메모리에 결과 채워 넣기
			//占쏙옙占쏙옙占쏙옙占?占쏙옙占쏙옙 占쌨모리울옙 占쏙옙占?채占쏙옙 占쌍깍옙
			CDitGlassRawClient *pDitRawClient = CDitGlassRawClient::GetInstance();
			//int nEqpID = m_pSP2P->ISP2P_System_GetSystemInfo()->m_nMachineType;
			CString strCellID = _T("");
			@@ -3506,7 +3571,7 @@
			nReflowjuge=1;
			}

			// 고객사 요청으로 수정함. 0,1 Position은 Pass
			// 占쏙옙占쏙옙占?占쏙옙청占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙. 0,1 Position占쏙옙 Pass
			else if(nReflowjuge == 3 \|\| nReflowjuge == 2)
			{
			m_pRP2P->IRP2P_DisplayMessage(_T("[ReflowResult] Reflow Judge Is No OverFlow %d"),nReflowjuge);
			@@ -3525,7 +3590,7 @@
			nReflowjuge=0;
			}

			//0:None, // 검출한 Line의 개수. 3 미만 : DAM2 Reflow 판정, 4~5 : DAM1 Reflow 판정, 6 : no Reflow 판정 / -1 : image not loaded, -2 : roi setting error, -3 : roi length error, -5 : select wrong side
			//0:None, // �� Line�� . 3 �̸� : DAM2 Reflow ��, 4~5 : DAM1 Reflow ��, 6 : no Reflow �� / -1 : image not loaded, -2 : roi setting error, -3 : roi length error, -5 : select wrong side
			if(pReviewResult->nReflow_CellIndex > 7)
			{
			pReviewResult->nReflow_CellIndex = 0;
			@@ -3542,7 +3607,7 @@

			if(pDitRawClient->isConnect() == TRUE)
			{
			int nDefectCount = pDitRawClient->GetGlassData()->m_nDefectNum; // user,reflow 는 검사 디펙 이후 생성되기에 디펙 카운트보다 같거나 큰값을 가지고 있다
			int nDefectCount = pDitRawClient->GetGlassData()->m_nDefectNum; // user,reflow �� ˻� �� Ǳ⿡ �� ī��Ʈ�� ų� ū�� ִ�
			if(pReviewResult->nDefectidx2 <nDefectCount)
			{
			return FALSE;
			@@ -3557,11 +3622,11 @@

			pSharedDefectReview->m_nPlanType = ditRaw::RTP_Reflow;
			pSharedDefectReview->m_nReflow_ResultCode = pReviewResult->nReflow_Result;// pReviewResult->nReflow_Result;
			//0:None, // 검출한 Line의 개수. 3 미만 : DAM2 Reflow 판정, 4~5 : DAM1 Reflow 판정, 6 : no Reflow 판정 / -1 : image not loaded, -2 : roi setting error, -3 : roi length error, -5 : select wrong side
			//0:None, // �� Line�� . 3 �̸� : DAM2 Reflow ��, 4~5 : DAM1 Reflow ��, 6 : no Reflow �� / -1 : image not loaded, -2 : roi setting error, -3 : roi length error, -5 : select wrong side
			//pSharedDefectReview->m_fReflow_LinePosData;
			pSharedDefectReview->m_nReflow_Side = pReviewResult->nReflow_Side;
			pSharedDefectReview->m_nReflow_InspectionMode = 0;
			m_pRP2P->IRP2P_DisplayMessage(_T("[공유메모리접근]인덱스[%d]파일명[%s]"),pReviewResult->nDefectidx2, pReviewResult->strUploadImgFileName);
			m_pRP2P->IRP2P_DisplayMessage(_T("[��޸��]�ε��[%d]��ϸ�[%s]"),pReviewResult->nDefectidx2, pReviewResult->strUploadImgFileName);
			}

			return TRUE;
			@@ -3571,7 +3636,7 @@
			{
			if(pReviewResult == NULL) return FALSE;

			//결과파일 공유 메모리에 결과 채워 넣기
			//占쏙옙占쏙옙占쏙옙占?占쏙옙占쏙옙 占쌨모리울옙 占쏙옙占?채占쏙옙 占쌍깍옙
			CDitGlassRawClient *pDitGlassRawClient = CDitGlassRawClient::GetInstance();

			if(pDitGlassRawClient->isConnect() == TRUE)
			@@ -3588,7 +3653,7 @@

			pSharedDefectReview->m_nPlanType = ditRaw::RTP_WSI;
			pSharedDefectReview->m_nWsi_ResultCode=pReviewResult->nWsi_ResultCode; //0:None, 1:Success
			pSharedDefectReview->m_nWsi_Type = 2;/* nWSIType; // 함몰 / 돌기 //wsi 진행 */
			pSharedDefectReview->m_nWsi_Type = 2;/* nWSIType; // �Ը� / �� //wsi �� */
			pSharedDefectReview->m_fWsi_ResultData[0]= pReviewResult->nWsi_DefectType; // 0:normal 1:metal 2:huge 3:diffuse 4:trashy
			pSharedDefectReview->m_fWsi_ResultData[1]=(float)(nWSIheight/1000.0);
			pSharedDefectReview->m_fWsi_ResultData[2]=(float)(nWSIWidth/1000.0); // 0:Type, 1:Height, 2:Width
			@@ -3598,7 +3663,7 @@
			pSharedDefectReview->m_fWsi_ResultData[6] = pReviewResult->dBZoneHeight;
			pSharedDefectReview->m_strWsi_2DImageFilename;
			pSharedDefectReview->m_strWsi_3DImageFilename;
			pSharedDefectReview->m_fWsiManification = 20;//20배 고정
			pSharedDefectReview->m_fWsiManification = 20;//20��
			pSharedDefectReview->m_dWsiMmMotorX=pReviewResult->dTargetMotorX;
			pSharedDefectReview->m_dWsiMmMotorY=pReviewResult->dTargetMotorY;

			@@ -3613,7 +3678,7 @@
			BOOL CReviewProcessor_CPJT::UpdateMemoryWsiReflowPlan( SReviewResult* pReviewResult )
			{
			if(pReviewResult == NULL) return FALSE;
			//결과파일 공유 메모리에 결과 채워 넣기
			//占쏙옙占쏙옙占쏙옙占?占쏙옙占쏙옙 占쌨모리울옙 占쏙옙占?채占쏙옙 占쌍깍옙
			CDitGlassRawClient *pDitRawClient = CDitGlassRawClient::GetInstance();


			@@ -3627,13 +3692,13 @@

			/*
			pPacket->GetInt(0) = Index
			pPacket->GetInt(1) = Wsi 측정 결과
			pPacket->GetInt(2) = A존 판정 결과 (1 성공 0 실패)
			pPacket->GetInt(3) = B존 판정 결과
			pPacket->GetInt(4) = C존 판정 결과
			pPacket->GetInt(5) = D존 판정 결과
			pPacket->GetInt(6) = Review에서 보내줬던 PointIndex
			pPacket->GetDouble(0) = 댐에서 Monomo까지의 거리
			pPacket->GetInt(1) = Wsi 占쏙옙占쏙옙 占쏙옙占?
			pPacket->GetInt(2) = A占쏙옙 占쏙옙占쏙옙 占쏙옙占?(1 占쏙옙占쏙옙 0 占쏙옙占쏙옙)
			pPacket->GetInt(3) = B占쏙옙 占쏙옙占쏙옙 占쏙옙占?
			pPacket->GetInt(4) = C占쏙옙 占쏙옙占쏙옙 占쏙옙占?
			pPacket->GetInt(5) = D占쏙옙 占쏙옙占쏙옙 占쏙옙占?
			pPacket->GetInt(6) = Review占쏙옙占쏙옙 占쏙옙占쏙옙占쏙옙占?PointIndex
			pPacket->GetDouble(0) = �￡�� Monomo�� Ÿ�
			*/

			// int nReflowjuge=0;
			@@ -3644,7 +3709,7 @@

			nWsiReflowJudge = pReviewResult->nWsi_ResultCode;

			//nWsiReflowResult += pReviewResult->nWsi_pReflowResultData[0] //A 1차 신경안씀
			//nWsiReflowResult += pReviewResult->nWsi_pReflowResultData[0] //A 1占쏙옙 占신곤옙횡占?
			nWsiReflowResult += pReviewResult->nWsi_pReflowResultData[1];//B
			nWsiReflowResult += pReviewResult->nWsi_pReflowResultData[2];//C
			//nWsiReflowResult += pReviewResult->nWsi_pReflowResultData[3];//D
			@@ -3704,7 +3769,7 @@
			{
			if(pReviewResult == NULL) return FALSE;

			//결과파일 공유 메모리에 결과 채워 넣기
			//占쏙옙占쏙옙占쏙옙占?占쏙옙占쏙옙 占쌨모리울옙 占쏙옙占?채占쏙옙 占쌍깍옙
			CDitGlassRawClient *pDitGlassRawClient = CDitGlassRawClient::GetInstance();

			if(pDitGlassRawClient->isConnect() == TRUE)
			@@ -3721,13 +3786,13 @@

			pSharedDefectReview->m_nPlanType = ditRaw::RTP_UserWsi;
			pSharedDefectReview->m_nWsi_ResultCode=pReviewResult->nWsi_ResultCode; //0:None, 1:Success
			pSharedDefectReview->m_nWsi_Type=nWSIType; // 함몰 / 돌기
			pSharedDefectReview->m_nWsi_Type=nWSIType; // �Ը� / ��
			pSharedDefectReview->m_fWsi_ResultData[0]= nWSIType;
			pSharedDefectReview->m_fWsi_ResultData[1]=(float)(nWSIheight/100.0);
			pSharedDefectReview->m_fWsi_ResultData[2]=(float)(nWSIWidth/100.0); // 0:Type, 1:Height, 2:Width
			pSharedDefectReview->m_strWsi_2DImageFilename;
			pSharedDefectReview->m_strWsi_3DImageFilename;
			pSharedDefectReview->m_fWsiManification = 20;//20배 고정
			pSharedDefectReview->m_fWsiManification = 20;//20��
			pSharedDefectReview->m_dWsiMmMotorX=pReviewResult->dTargetMotorX;
			pSharedDefectReview->m_dWsiMmMotorY=pReviewResult->dTargetMotorY;
			}
			@@ -3739,7 +3804,7 @@
			{
			if (pReviewResult == NULL) return FALSE;

			//결과파일 공유 메모리에 결과 채워 넣기
			//占쏙옙占쏙옙占쏙옙占?占쏙옙占쏙옙 占쌨모리울옙 占쏙옙占?채占쏙옙 占쌍깍옙
			CDitGlassRawClient *pDitGlassRawClient = CDitGlassRawClient::GetInstance();

			if (pDitGlassRawClient->isConnect() == TRUE)
			@@ -3756,13 +3821,13 @@

			pSharedDefectReview->m_nPlanType = ditRaw::RTP_WSI;
			pSharedDefectReview->m_nWsi_ResultCode = pReviewResult->nWsi_ResultCode; //0:None, 1:Success
			pSharedDefectReview->m_nWsi_Type = nWSIType; // 함몰 / 돌기
			pSharedDefectReview->m_nWsi_Type = nWSIType; // �Ը� / ��
			pSharedDefectReview->m_fWsi_ResultData[0] = nWSIType;
			pSharedDefectReview->m_fWsi_ResultData[1] = (float)(nWSIheight / 100.0);
			pSharedDefectReview->m_fWsi_ResultData[2] = (float)(nWSIWidth / 100.0); // 0:Type, 1:Height, 2:Width
			pSharedDefectReview->m_strWsi_2DImageFilename;
			pSharedDefectReview->m_strWsi_3DImageFilename;
			pSharedDefectReview->m_fWsiManification = 20;//20배 고정
			pSharedDefectReview->m_fWsiManification = 20;//20��
			pSharedDefectReview->m_dWsiMmMotorX = pReviewResult->dTargetMotorX;
			pSharedDefectReview->m_dWsiMmMotorY = pReviewResult->dTargetMotorY;

			@@ -3793,7 +3858,7 @@
			double TempValue = 0;
			double m_nResultFocusValue = 0;

			// 원점 XY 기준 X+1, Y+1에 대한 차영상
			// �� XY �� X+1, Y+1��
			for (int y = 0; y < nHeight - 1; y++)
			{
			for (int x = 0; x < nWidth - 1; x++)