Power 측정 중에는 모든 버튼 진입 금지 Master(DIT) Mode 제외.

천호석

2022-12-06 183f2b92b7d5058a8f0d289826d7698b542038fe

 SHARP_CLAS_UI/500.Equipment/Equipment.cs

@@ -366,7 +366,24 @@
                sm.Set_Value(Process_Memory_Address.ULD_Tray_Ng_Count, value);
            }
        }
        

        public int WidthMeasurementCount
        {
            get
            {
                int count;
                object value;

                sm.Get_Value(Process_Memory_Address.Width_Measurement_Count, out value);
                int.TryParse($"{value}", out count);
                return count;
            }
            set
            {
                sm.Set_Value(Process_Memory_Address.Width_Measurement_Count, value);
            }
        }

        public Main_Recipe Cur_Main_Recipe
        {
            get
@@ -547,7 +564,7 @@
        private User_Info _user;
        private SequenceTimer _modeChangeTime = new SequenceTimer();

        private string _programVersion = "001.001.005";
        private string _programVersion = "001.002.001";
        #endregion

        #region Construct
@@ -561,7 +578,7 @@

            power_meter = new Power_Meter(this, "COM3");
            power_meter.Open();

            power_meter.HandShakingOn();
            Create_Exception_logger();
            Create_Panel_Info_logger();
            Create_Tact_Time_logger();
@@ -961,7 +978,12 @@

                if (!Align_vision.isConnected) Alarm_Manager.Instance.Occurred(En_Alarm_List.AL_0510_ALIGN_VISION_DISCONNECT);
                if (!Aoi_vision.isConnected) Alarm_Manager.Instance.Occurred(En_Alarm_List.AL_0511_AOI_VISION_DISCONNECT);
                if (!power_meter.isOpen && !Alarm_Manager.Instance.Occured_List.Exists(X => X.Code == En_Alarm_List.AL_0930_POWER_METER_DISCONNECTED)) { Alarm_Manager.Instance.Occurred(En_Alarm_List.AL_0930_POWER_METER_DISCONNECTED); power_meter.Open(); }
                if (!power_meter.isOpen && !Alarm_Manager.Instance.Occured_List.Exists(X => X.Code == En_Alarm_List.AL_0930_POWER_METER_DISCONNECTED))
                {
                    Alarm_Manager.Instance.Occurred(En_Alarm_List.AL_0930_POWER_METER_DISCONNECTED);
                    power_meter.Open();
                    power_meter.HandShakingOn();
                }

                if (equip_mode == En_Equipment_Mode.Auto && dt.Second % 10 == 0 && (loader.Panel_Exist && before.Panel_Exist && process.Panel_Exist && after.Panel_Exist && unloader.Panel_Exist) && !units.Exists(x => x.sequenceChangedTime.Minute < 10))
                {
@@ -975,6 +997,64 @@
                    panel_count_info.CleaningCount = 0;
                    Panel_Count_Info_Manager.Instance.Save_Panel_Count_Info(panel_count_info);
                }

                if(equip_mode != En_Equipment_Mode.Auto) // Auto mode가 아닐 때 
                {
                    if(equip_mode == En_Equipment_Mode.Pause && units.Exists(x => x.UnitMode != equip_mode))
                    {
                        // Pause wait 상태 일 때는 interlock 발생 X
                    }
                    else
                    {
                        
                    }
                }

                // Laser On Interlock 
                // Power meter 위치 or 가공 위치가 아닐 때 Laser on시 Laser off 진행 후 Interlock.
                if (Cur_Main_Recipe != null && Cur_Main_Recipe.process_info != null && Cur_Main_Recipe.panel_type_info != null)
                {
                    double scannerA1Position = Cur_Main_Recipe.process_info.Scanner_X_A1 + Cur_Main_Recipe.panel_type_info.Scanner_Offset_X_A1;
                    double scannerA2Position = Cur_Main_Recipe.process_info.Scanner_X_A2 + Cur_Main_Recipe.panel_type_info.Scanner_Offset_X_A2;
                    double scannerB1Position = Cur_Main_Recipe.process_info.Scanner_X_B1 + Cur_Main_Recipe.panel_type_info.Scanner_Offset_X_B1;
                    double scannerB2Position = Cur_Main_Recipe.process_info.Scanner_X_B2 + Cur_Main_Recipe.panel_type_info.Scanner_Offset_X_B2;

                    object value;
                    sm.Get_Value(Position_Parameter_Address.Scanner_X_Power_Meter_Position, out value);
                    double scannerPosition = double.Parse($"{value}");

                    bool isInPosition = false;

                    isInPosition |= scannerA1Position - 10 <= scannerPosition && scannerPosition <= scannerA1Position + 10;
                    isInPosition |= scannerA2Position - 10 <= scannerPosition && scannerPosition <= scannerA2Position + 10;
                    isInPosition |= scannerB1Position - 10 <= scannerPosition && scannerPosition <= scannerB1Position + 10;
                    isInPosition |= scannerB2Position - 10 <= scannerPosition && scannerPosition <= scannerB2Position + 10;
                    isInPosition |= process.ablation.Get_Is_Position_X_Power_Meter() && process.ablation.Get_Is_Position_Z_Power_Meter();

                    if(isInPosition == false)
                    {
                        if (sm.Get_Bit(Input_Memory_Address.Laser_Active))
                        {
                            scanner.Set_Laser_Off();
                            Interlock_Manager.Add_Interlock_Msg("Laser can't on.", "Please move power meter position.");
                        }
                    }
                }
                else
                {
                    bool isInPosition = false;
                    isInPosition |= process.ablation.Get_Is_Position_X_Power_Meter() && process.ablation.Get_Is_Position_Z_Power_Meter();

                    if (isInPosition == false)
                    {
                        if (sm.Get_Bit(Input_Memory_Address.Laser_Active))
                        {
                            scanner.Set_Laser_Off();
                            Interlock_Manager.Add_Interlock_Msg("Laser can't on.", "Please move power meter position.");
                        }
                    }
                }
                
            }
            catch(Exception e)
            {
@@ -1440,6 +1520,12 @@
                        return false;
                    }
                    
                    if(Door_Opened)
                    {
                        Interlock_Manager.Add_Interlock_Msg("Can't Change auto mode.", "Please door close.");
                        return false;
                    }

                    if(!Is_Home_Complete)
                    {
                        Interlock_Manager.Add_Interlock_Msg("Can't Change auto mode.", "Please Set Home.");