1. Laser on 시 Stage position도 같이 확인 하도록 변경. 2. Auto power 측정, Manual power ...

천호석

2022-12-14 f0839d9fdd9dc74eef0eafc5562fabf9d7259f08

 SHARP_CLAS_UI/100.Screen/Form_Maintenance_Laser.cs

@@ -18,9 +18,13 @@
            S1110_MEASURE_MODE_SET_W,
            S1120_MEASURE_MODE_SET_CHECK,
            S1130_ZERO_SET,
            S1150_STAY_POSITION_MOVE,
            S1160_POSITION_CHECK,

            S1210_SCANNER_POSITION_MOVE,
            S1210_SCANNER_POSITION_X_MOVE,
            S1220_SCANNER_MOVE_WAIT,
            S1230_SCANNER_POSITION_Z_MOVE,
            S1240_SCANNER_MOVE_WAIT,
            S1300_SCANNER_INIT,
            S1310_POWER_SET,
            S1320_LASER_ON,
@@ -254,29 +258,80 @@
                case En_Manual_Measure.S1130_ZERO_SET:
                    {
                        power_meter.Set_Zero();
                        Measure_Seq = En_Manual_Measure.S1210_SCANNER_POSITION_MOVE;
                        Measure_Seq = En_Manual_Measure.S1150_STAY_POSITION_MOVE;
                        break;
                    }
                case En_Manual_Measure.S1210_SCANNER_POSITION_MOVE:
                case En_Manual_Measure.S1150_STAY_POSITION_MOVE:
                    {
                        double position = _Parent._equip.process.ablation.Get_Scanner_Z_A1_Stay_Position();

                        if (_Parent._equip.process.ablation.MotorZ.Move_Absolute_Pos(position, 500))
                        {
                            Measure_Seq = En_Manual_Measure.S1160_POSITION_CHECK;
                        }
                        break;
                    }
                case En_Manual_Measure.S1160_POSITION_CHECK:
                    {
                        double position = _Parent._equip.process.ablation.Get_Scanner_Z_A1_Stay_Position();

                        if (_Parent._equip.process.ablation.MotorZ.MotionComplete)
                        {
                            if (_Parent._equip.process.ablation.MotorZ.Is_Inposition(position, _Parent._equip.Setting.Inposition_Offset))
                            {
                                Measure_Seq = En_Manual_Measure.S1210_SCANNER_POSITION_X_MOVE;
                            }
                            else
                            {
                                Measure_Seq = En_Manual_Measure.S1150_STAY_POSITION_MOVE;
                            }
                        }
                        break;
                    }
                case En_Manual_Measure.S1210_SCANNER_POSITION_X_MOVE:
                    {
                        if (_Parent._equip.process.ablation.Move_X_Power_Meter_Position())
                        {
                            if (_Parent._equip.process.ablation.Move_Z_Power_Meter_Position())
                            {
                                lb_Position_Move.BackColor = System.Drawing.Color.Lime;
                                Measure_Seq = En_Manual_Measure.S1220_SCANNER_MOVE_WAIT;
                            }
                            lb_Position_Move.BackColor = System.Drawing.Color.Lime;
                            Measure_Seq = En_Manual_Measure.S1220_SCANNER_MOVE_WAIT;
                        }
                        break;
                    }
                case En_Manual_Measure.S1220_SCANNER_MOVE_WAIT:
                    {
                        if (_Parent._equip.process.ablation.MotorX.MotionComplete && _Parent._equip.process.ablation.MotorZ.MotionComplete)
                        if (_Parent._equip.process.ablation.MotorX.MotionComplete)
                        {
                            if (_Parent._equip.process.ablation.Get_Is_Position_X_Power_Meter() && _Parent._equip.process.ablation.Get_Is_Position_Z_Power_Meter())
                            if (_Parent._equip.process.ablation.Get_Is_Position_X_Power_Meter())
                            {
                                Measure_Seq = En_Manual_Measure.S1230_SCANNER_POSITION_Z_MOVE;
                            }
                            else
                            {
                                Measure_Seq = En_Manual_Measure.S1210_SCANNER_POSITION_X_MOVE;
                            }
                        }
                        break;
                    }
                case En_Manual_Measure.S1230_SCANNER_POSITION_Z_MOVE:
                    {
                        if (_Parent._equip.process.ablation.Move_X_Power_Meter_Position())
                        {
                            Measure_Seq = En_Manual_Measure.S1240_SCANNER_MOVE_WAIT;
                        }
                        break;
                    }
                case En_Manual_Measure.S1240_SCANNER_MOVE_WAIT:
                    {
                        if (_Parent._equip.process.ablation.MotorZ.MotionComplete)
                        {
                            if (_Parent._equip.process.ablation.Get_Is_Position_Z_Power_Meter())
                            {
                                Measure_Seq = En_Manual_Measure.S1300_SCANNER_INIT;
                            }
                            else
                            {
                                Measure_Seq = En_Manual_Measure.S1230_SCANNER_POSITION_Z_MOVE;
                            }
                        }
                        break;
                    }