From f0839d9fdd9dc74eef0eafc5562fabf9d7259f08 Mon Sep 17 00:00:00 2001
From: 천호석 <hosuk1418@naver.com>
Date: 수, 14 12월 2022 17:46:40 +0900
Subject: [PATCH] 1. Laser on 시 Stage position도 같이 확인 하도록 변경. 2. Auto power 측정, Manual power 측정 전후 Scanner Z 축 대기 위치 이동 하도록 수정 3. 프로그램 종료 시 Laser off 하도록 수정. 종료 대기시간 5sec
---
SHARP_CLAS_UI/100.Screen/Form_Maintenance_Laser.cs | 82 +++++++++++++++++++++++++++++++++++-----
1 files changed, 71 insertions(+), 11 deletions(-)
diff --git a/SHARP_CLAS_UI/100.Screen/Form_Maintenance_Laser.cs b/SHARP_CLAS_UI/100.Screen/Form_Maintenance_Laser.cs
index cb4e772..aea5e74 100644
--- a/SHARP_CLAS_UI/100.Screen/Form_Maintenance_Laser.cs
+++ b/SHARP_CLAS_UI/100.Screen/Form_Maintenance_Laser.cs
@@ -18,9 +18,13 @@
S1110_MEASURE_MODE_SET_W,
S1120_MEASURE_MODE_SET_CHECK,
S1130_ZERO_SET,
+ S1150_STAY_POSITION_MOVE,
+ S1160_POSITION_CHECK,
- S1210_SCANNER_POSITION_MOVE,
+ S1210_SCANNER_POSITION_X_MOVE,
S1220_SCANNER_MOVE_WAIT,
+ S1230_SCANNER_POSITION_Z_MOVE,
+ S1240_SCANNER_MOVE_WAIT,
S1300_SCANNER_INIT,
S1310_POWER_SET,
S1320_LASER_ON,
@@ -254,28 +258,79 @@
case En_Manual_Measure.S1130_ZERO_SET:
{
power_meter.Set_Zero();
- Measure_Seq = En_Manual_Measure.S1210_SCANNER_POSITION_MOVE;
+ Measure_Seq = En_Manual_Measure.S1150_STAY_POSITION_MOVE;
break;
}
- case En_Manual_Measure.S1210_SCANNER_POSITION_MOVE:
+ case En_Manual_Measure.S1150_STAY_POSITION_MOVE:
+ {
+ double position = _Parent._equip.process.ablation.Get_Scanner_Z_A1_Stay_Position();
+
+ if (_Parent._equip.process.ablation.MotorZ.Move_Absolute_Pos(position, 500))
+ {
+ Measure_Seq = En_Manual_Measure.S1160_POSITION_CHECK;
+ }
+ break;
+ }
+ case En_Manual_Measure.S1160_POSITION_CHECK:
+ {
+ double position = _Parent._equip.process.ablation.Get_Scanner_Z_A1_Stay_Position();
+
+ if (_Parent._equip.process.ablation.MotorZ.MotionComplete)
+ {
+ if (_Parent._equip.process.ablation.MotorZ.Is_Inposition(position, _Parent._equip.Setting.Inposition_Offset))
+ {
+ Measure_Seq = En_Manual_Measure.S1210_SCANNER_POSITION_X_MOVE;
+ }
+ else
+ {
+ Measure_Seq = En_Manual_Measure.S1150_STAY_POSITION_MOVE;
+ }
+ }
+ break;
+ }
+ case En_Manual_Measure.S1210_SCANNER_POSITION_X_MOVE:
{
if (_Parent._equip.process.ablation.Move_X_Power_Meter_Position())
{
- if (_Parent._equip.process.ablation.Move_Z_Power_Meter_Position())
- {
- lb_Position_Move.BackColor = System.Drawing.Color.Lime;
- Measure_Seq = En_Manual_Measure.S1220_SCANNER_MOVE_WAIT;
- }
+ lb_Position_Move.BackColor = System.Drawing.Color.Lime;
+ Measure_Seq = En_Manual_Measure.S1220_SCANNER_MOVE_WAIT;
}
break;
}
case En_Manual_Measure.S1220_SCANNER_MOVE_WAIT:
{
- if (_Parent._equip.process.ablation.MotorX.MotionComplete && _Parent._equip.process.ablation.MotorZ.MotionComplete)
+ if (_Parent._equip.process.ablation.MotorX.MotionComplete)
{
- if (_Parent._equip.process.ablation.Get_Is_Position_X_Power_Meter() && _Parent._equip.process.ablation.Get_Is_Position_Z_Power_Meter())
+ if (_Parent._equip.process.ablation.Get_Is_Position_X_Power_Meter())
+ {
+ Measure_Seq = En_Manual_Measure.S1230_SCANNER_POSITION_Z_MOVE;
+ }
+ else
+ {
+ Measure_Seq = En_Manual_Measure.S1210_SCANNER_POSITION_X_MOVE;
+ }
+ }
+ break;
+ }
+ case En_Manual_Measure.S1230_SCANNER_POSITION_Z_MOVE:
+ {
+ if (_Parent._equip.process.ablation.Move_X_Power_Meter_Position())
+ {
+ Measure_Seq = En_Manual_Measure.S1240_SCANNER_MOVE_WAIT;
+ }
+ break;
+ }
+ case En_Manual_Measure.S1240_SCANNER_MOVE_WAIT:
+ {
+ if (_Parent._equip.process.ablation.MotorZ.MotionComplete)
+ {
+ if (_Parent._equip.process.ablation.Get_Is_Position_Z_Power_Meter())
{
Measure_Seq = En_Manual_Measure.S1300_SCANNER_INIT;
+ }
+ else
+ {
+ Measure_Seq = En_Manual_Measure.S1230_SCANNER_POSITION_Z_MOVE;
}
}
break;
@@ -523,5 +578,10 @@
{
_Parent._equip.scanner.Set_Laser_Off();
}
+
+ private void btn_HandShakeOn_Click(object sender, EventArgs e)
+ {
+ _Parent._equip.power_meter.HandShakingOn();
+ }
}
-}
+}
\ No newline at end of file
--
Gitblit v1.9.3