//---------------------------------------------------------------------------
//  Project PMACUSB Firmware
//  Quad 1, Inc.
//  Copyright © 1999. All Rights Reserved.
//
//  SUBSYSTEM:    PMACUSB Expansion Card
//  FILE:         VENDCMDS.H
//  AUTHOR:       Henry Bausley
//
//  OVERVIEW
//  ~~~~~~~~
//  Header file of constants for various vendor specific codes
//
//  NOTES
//  ~~~~~
//
//----------------------------------------------------------------------------

#ifndef _VENDCMDS_H
#define _VENDCMDS_H

// Command Structure for ethernet
typedef struct tagEthernetCmd
{
  BYTE  RequestType;
  BYTE  Request;
  WORD  wValue;
  WORD  wIndex;
  WORD  wLength;
  BYTE  bData[1492];
}  ETHERNETCMD,*PETHERNETCMD;
#define ETHERNETCMDSIZE    8

//-----------------------------------------------------------------------------
// Constants Defined by USB 1.1 Spec
//-----------------------------------------------------------------------------
#define VR_UPLOAD        0xC0 // command sent to host
#define VR_DOWNLOAD      0x40 // command sent to device

//-----------------------------------------------------------------------------
// Constants Defined by Anchor Chips that are internal to CPU or reserved
//-----------------------------------------------------------------------------
#define VR_ANCHOR_DLD     0xA0 // handled by core -- A0-AF reserved by Anchor
#define VR_EEPROM         0xA2 // loads (uploads) EEPROM
#define VR_RAM            0xA3 // loads (uploads) external ram
#define VR_SETI2CADDR     0xA4
#define VR_GETI2C_TYPE    0xA5 // 8 or 16 byte address
#define VR_GET_CHIP_REV   0xA6 // Rev A, B = 0, Rev	C = 2
#define VR_TEST_MEM       0xA7 // runs mem test and	returns	result
#define VR_RENUM          0xA8 // renum
#define VR_DB_FX	      0xA9 // Force use of double byte address EEPROM (for FX)
#define VR_I2C_100        0xAA // put the i2c bus in 100Khz mode
#define VR_I2C_400        0xAB // put the i2c bus in 400Khz mode
#define VR_NOSDPAUTO      0xAC // test code. does uploads using SUDPTR with manual length override

#define GET_CHIP_REV()		((CPUCS >> 4) & 0x00FF) // EzUSB Chip Rev Field

#define SERIAL_ADDR		  0x50
#define EP0BUFF_SIZE      0x40

//-----------------------------------------------------------------------------
// Constants Defined by Quad 1 for implementing PMACUSB expansion card
//-----------------------------------------------------------------------------
#define VR_PMAC_SENDLINE     0xB0  // Device specific vendor commands
#define VR_PMAC_GETLINE      0xB1
#define VR_PMAC_FLUSH        0xB3
#define VR_PMAC_GETMEM       0xB4
#define VR_PMAC_SETMEM       0xB5
#define VR_PMAC_SENDCTRLCHAR 0xB6

#define VR_PMAC_ENARTDATAGAT 0xB7
#define VR_PMAC_INIT         0xB8
#define VR_EEPROM_VIDDID     0xB9
#define VR_PMAC_SETBIT       0xBA
#define VR_PMAC_SETBITS      0xBB
#define VR_PMAC_DATAPORT     0xBC
#define VR_PMAC_STATUSPORT   0xBD
#define VR_PMAC_PORT         0xBE
#define VR_PMAC_GETRESPONSE  0xBF


#define VR_PMAC_SETSERCHAR   0xC0
#define VR_PMAC_GETSERCHAR   0xC1
#define VR_PMAC_READREADY    0xC2
#define VR_PMAC_GETLINE_B    0xC3
#define VR_CTRL_RESPONSE     0xC4
#define VR_PMAC_GETBUFFER    0xC5
#define VR_PMAC_WRITEBUFFER  0xC6
#define VR_PMAC_WRITEERROR   0xC7
#define VR_PMAC_BINROTPUT    0xC8
#define VR_PMAC_BINROTERROR  0xC9
#define VR_PMAC_BINROTINIT   0xCA
#define VR_FWDOWNLOAD        0xCB

#define VR_PMAC_CLOSE        0xD0

// Added by LSJ for Multiple Host Communication with Ethernet
// And Interrupt Features
#define VR_PMAC_INTRSTRING		0xCC
#define VR_PMAC_KEEPALIVESTR	0xD6
#define VR_PMAC_SPINLOCK		0xD7


#define VR_IPADDRESS         0xE0
#define VR_MACADDRESS        0xE1
#define VR_DATE              0xE2
#define VR_TIME              0xE3
#define VR_VERSION           0xE4


#define EEPROMVER               8139
#define EEPROMTIME              8147
#define EEPROMDATE              8163
#define TCP_EEPROMADDR          8179
#define GATEWAYIP_EEPROMADDR    8180
#define GATEWAYMASK_EEPROMADDR  8184
#define IP_EEPROMADDR           8188
#define MAC_EEPROMADDR          8182
#define MAC_LEN                    6
#define IP_LEN                     4
#define TIME_LEN                  16
#define DATE_LEN                  16
#define VER_LEN                    8







//-----------------------------------------------------------------------------
// Prototypes
//-----------------------------------------------------------------------------
#ifndef _WINDOWS
void EEPROMWrite(WORD addr, BYTE length, BYTE xdata *buf); //TPM EEPROM Write
void EEPROMRead(WORD addr, BYTE length, BYTE xdata *buf);  //TPM EEPROM Read
void WaitForEndpoint0(bit IN);
#endif

#endif